Export limit exceeded: 429749 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (429749 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99334 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 5.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: Add preempt_disable() around virtual-mode HPTE bit-lock users kvmppc_hv_find_lock_hpte() requires virtual-mode callers to run with preemption disabled, because it can return with HPTE_V_HVLOCK still held until the caller later unlocks the HPTE. Existing virtual-mode callers in book3s_64_mmu_hv.c already follow that rule. Two virtual-mode call paths do not: 1. kvmppc_handle_exit_hv() calls kvmppc_hpte_hv_fault() for hash-mode data-side and instruction-side faults after guest exit, with preemption already enabled. kvmppc_hpte_hv_fault() calls kvmppc_hv_find_lock_hpte() directly. 2. kvmppc_pseries_do_hcall() executes virtual-mode handlers for HPT hcalls via kvmppc_pseries_do_hpt_hcall() with preemption enabled. The handlers for H_ENTER, H_REMOVE, H_READ, H_CLEAR_MOD, H_CLEAR_REF, H_PROTECT, and H_BULK_REMOVE spin on try_lock_hpte() or lock_rmap(), and H_ENTER also reaches kvmppc_do_h_enter(), which uses arch_spin_lock() on kvm->mmu_lock. That raw lock choice is intentional because kvmppc_do_h_enter() is also used by real-mode callers, so the correct fix is to establish the proper preemption context at the virtual-mode caller boundary. If a vCPU thread is preempted while holding HPTE_V_HVLOCK, any other thread on the same CPU trying to acquire the same bit-lock can spin indefinitely. The same applies to lock_rmap() users and to the H_ENTER path while holding the raw mmu_lock. Fix this by adding preempt_disable()/preempt_enable() pairs around the two kvmppc_hpte_hv_fault() call sites in kvmppc_handle_exit_hv(), and around the kvmppc_pseries_do_hpt_hcall() invocation in kvmppc_pseries_do_hcall(). Targeting only the HPT hcall helper avoids wrapping non-HPT hcalls (such as H_RTAS, H_CONFER, H_REGISTER_VPA) that perform page faults, blocking memory allocations, or context switches. | ||||
| CVE-2026-99333 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: amd_sfh: Use report type from request node Use report type from request node while sending feature and input reports to HID core. The cli_data report type array is never assigned and feature reports are sent as input reports. | ||||
| CVE-2026-99332 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: core: Fix out-of-bounds left shift by 32 in s32ton() Syzbot reported an out-of-bounds shift (32-bit integer shifted left by 32) in the s32ton() routine in the HID core. This routine converts a signed 32-bit integer to a signed n-bit integer, and it caps the value of n at 32. But when n == 32 there's no need to do anything; it can simply return the input value. This will avoid calculating (1 << n) when n is 32, which was the cause of the invalid shift. | ||||
| CVE-2026-99331 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 4.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: cp2112: validate response report lengths The HID core invokes raw_event callbacks before validating the report length. cp2112_raw_event() reads every field of a transfer status response without checking size. For a data response, it reads the length at offset two and copies that many bytes from offset three, again without ensuring that the input report contains them. Require a complete transfer status structure. For data responses, first require the header and then ensure the clamped payload length fits in the received report before copying it. Commit 47669bec44fe ("HID: asus: refactor the two workqueues and init sequence") added the same kind of raw_event length validation to hid-asus. | ||||
| CVE-2026-99330 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 5.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: mcp2200: validate READ_ALL response length The HID core invokes raw_event callbacks before validating the report length. mcp2200_raw_event() casts a READ_ALL response to struct mcp_read_all_resp and reads fields through offset ten without checking that the response contains the structure. A one-byte READ_ALL response reproduced the issue under KASAN: BUG: KASAN: slab-out-of-bounds in mcp2200_raw_event+0x24b/0x3a0 Read of size 1 by task hidtrigger/89 Call Trace: mcp2200_raw_event+0x24b/0x3a0 kasan_report+0x139/0x170 Reject an incomplete READ_ALL response with a protocol error before reading its fields. The common completion path then wakes the command waiter with the error instead of leaving it to time out. Commit 47669bec44fe ("HID: asus: refactor the two workqueues and init sequence") added the same kind of raw_event length validation to hid-asus. | ||||
| CVE-2026-99329 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: mcp2221: always initialize and cancel init_work The writable gpio_mode_enforce parameter can change between probe and remove. If it changes from false to true after probe, remove skips cancellation of init_work. Pending or running work can then access devm-managed driver state after teardown. Changing it from true to false can make remove cancel an uninitialized delayed work item. Initialize init_work whenever IIO is reachable and cancel it unconditionally on remove. Keep the parameter check only for scheduling the initialization. The false-to-true cancellation gap was previously reported by Sashiko. We also encountered this issue during our static-analysis research. | ||||
| CVE-2026-99328 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: picoLCD: check for fb_deferred_io_init() error fb_deferred_io_init() allocates deferred I/O state, populating info->fbdefio_state, or leaving it NULL if an error occurs. Currently picolcd_init_framebuffer() ignores its return value. Therefore if an error arises in fb_deferred_io_init() (for instance, due to an allocation failure) info->fbdefio_state is left NULL. When the file is subsequently opened, fb_open() will dereference a NULL pointer (calling fb_deferred_io_open()). Fix this by checking for the error. Also correct cleanup ordering - defio is initialised after the sysfs file, so cleanup defio first. | ||||
| CVE-2026-99327 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 4.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: roccat: kovaplus: reject short button reports The raw event callback runs before HID core validates and zero-pads the report. It passes the buffer to helpers which inspect data[0] and read a complete struct kovaplus_mouse_report_button for button reports. A truncated report can therefore cause an out-of-bounds read. Require enough data for the button report before calling either helper. Commit 47669bec44fe ("HID: asus: refactor the two workqueues and init sequence") added the same kind of raw-event length validation to hid-asus. | ||||
| CVE-2026-99326 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 4.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: hid-lenovo-go-s: Prevent deadlock if device removed during setup hid_gos_cfg_remove() calls a mutex before canceling delayed work. That delayed work function calls mcu_property_out(), which holds the same mutex. Prevent deadlock my removing the mutex prior to stopping the work. Additionally, since cancel_delayed_work has the potential to re-arm, switch to disable_delayed_work. | ||||
| CVE-2026-99325 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: hid-lenovo-go-s: Add suspend function and gate access under bool. Currently a device can suspend while delayed work is pending or executing. Cancel delayed work if it was pending and restart it if it hasn't run yet. Gate access to show/store functions behind a bool to prevent access prior to cfg_setup() being completed. | ||||
| CVE-2026-99324 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix out-of-bounds read when padding the final compound response Compound response handling pads the last response of a compound to an 8-byte boundary by growing the final iov and the RFC1002 length. smb2_allocate_rsp_buf() allocates exactly response_sz. A command can fill the response buffer to within 7 bytes of its end, for example a QUERY_INFO whose output is bounded only by the space left. The padding can then run past the allocation, and ksmbd_tcp_writev() reads those bytes when it sends the response. BUG: KASAN: slab-out-of-bounds in _copy_from_iter+0x744/0x10e0 Call Trace: _copy_from_iter+0x744/0x10e0 tcp_sendmsg_locked+0x2290/0x3f80 ksmbd_tcp_writev+0x10c7/0x1ab0 [ksmbd] Allocate room for the padding when the request is a compound, as smb2_read() and smb2_read_pipe() do for their payloads. response_sz is unchanged, so commands still fill only up to it, and kvzalloc() zeroes the padding. | ||||
| CVE-2026-99323 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix invalid pointer dereference when get_inode_acl() fails When get_inode_acl() fails, it returns an ERR_PTR(), but ksmbd_acls_fattr() stored that pointer in smb_fattr without checking for errors. Later callers then passed the error pointer to security descriptor helpers or posix_acl_release(), resulting in an invalid pointer dereference. This was reproduced on an XFS-backed share when xfs_get_acl() returned ERR_PTR(-ENOMEM). Querying the SMB ACL from a CIFS client triggered the crash: BUG: unable to handle page fault for address: fffffffffffffff8 RIP: smb_acl_sec_desc_scratch_len+0x58/0x90 [ksmbd] Call Trace: smb2_query_info+0x40d/0x17c0 [ksmbd] handle_ksmbd_work+0x1ca/0x770 [ksmbd] Fix this by checking the return values from get_inode_acl() in ksmbd_acls_fattr(). Treat -EOPNOTSUPP as indicating that no ACL is available, and propagate all other errors to the callers. Update smb2_open() and smb2_get_info_sec() to handle these errors. | ||||
| CVE-2026-99322 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: rebind completed CREATE replays without draining the old channel A completed DurableHandleReqV2 CREATE can be replayed through another channel while its original channel is exiting. The existing replay path returns the open but leaves its connection and oplock references pointing at the old channel. Its open count also stays on that channel, and a later CLOSE through the surviving channel decrements the wrong counter. After checking the owner, lease key and persistent flag, verify that an active open is still published in the requesting session's file table. Do this even when no oplock was granted, and before processing a consumed replay. Do not read a borrowed opinfo session pointer for this check. Keep a healthy original binding. If the original channel is exiting or releasing, move the open and its own oplock references to the requesting channel. Serialize this with CLOSE using the session file-table lock, and with detach, reconnect and notification snapshots using m_lock. The earlier lock index and lease-table changes make their lifetimes independent of this connection change. No old-channel r_count wait is needed, including when an unrelated request remains active there. Account final close against fp->conn in one place, balance durable detach and reconnect, and transfer the count with a replay binding change. A final global lookup put may run after CLOSE has removed the volatile id; unlink the open from the inode list on that final close as well. A live completed CREATE replay may follow a break that lowered the durable open's batch oplock. Apply the batch eligibility check only to detached reconnects, while retaining the owner, lease key and persistent flag checks for active replays. | ||||
| CVE-2026-99321 | 1 Linux | 1 Linux Kernel | 2026-11-19 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: rust_binder: wake epoll on self-work queued to poll thread When a thread pushes work to its own todo list, InnerThread::push_work() returns PushWorkRes::OkNotifyPoll if the thread uses epoll, but four call sites in thread.rs discard this return value. As a result, a non-blocking BC_* write that enqueues work onto the calling thread's todo list without also reading will not wake epoll. Check the return value and call self.process.notify_poll(false) when PushWorkRes::OkNotifyPoll is returned. This is similar to commit 97830f3c3088 ("binder: signal epoll threads of self-work"), but in C Binder pending thread work also prevented subsequent process work from waking epoll, causing a permanent hang, which is not the case in Rust Binder. This means that in practice, it merely delays notifications rather than completely failing to send them. | ||||
| CVE-2026-76090 | 1 Softwaremill | 1 Tapir | 2026-11-19 | N/A |
| Tapir is a Scala library for describing HTTP APIs and exposing, consuming, and documenting them using open standards. Prior to 1.13.27, tapir-openapi-codegen-core generates Scala source from untrusted OpenAPI documents by interpolating object property names, query, header, and path parameter names, and operation tags without context-appropriate validation or escaping. Crafted names or values can break out of generated identifier or string-literal contexts and inject arbitrary Scala that executes when generated code is compiled or endpoints are assembled. This is a code-generation and build-time issue and does not make a running tapir server directly exploitable. This issue is fixed in version 1.13.27. | ||||
| CVE-2026-73864 | 1 Uhop | 1 Install-artifact-from-github | 2026-11-19 | 7.5 High |
| install-artifact-from-github installs prebuilt native artifacts hosted by GitHub without compiling them locally. Prior to 1.7.0, bin/install-from-cache.js downloads a native .node artifact, allows RE2_DOWNLOAD_MIRROR to select a source, follows HTTP redirects including HTTPS-to-HTTP downgrades, and writes the decompressed response to the artifact path without cryptographic integrity verification before writing or loading it. An attacker who controls a configured mirror, replaces a release asset, or can modify plaintext transport can supply native code that executes when the consumer loads the artifact. Version 1.7.0 adds SHA-256 verification for default-GitHub-source downloads when the consuming package publishes an artifactHashes bag; configured mirrors and packages without a bag remain outside that verification. | ||||
| CVE-2026-71425 | 1 Avitorio | 1 Outstatic | 2026-11-19 | 6.5 Medium |
| Outstatic is a static site CMS for Markdown and MDX content stored in GitHub repositories. Prior to 2.2.1, the authenticated GitHub REST proxy accepts an unvalidated endpoint value, constructs an upstream URL by string concatenation, and attaches the current dashboard user's GitHub OAuth token without ensuring the destination remains the exact GitHub API origin. An authenticated dashboard user can cause the server to send that user's token to a non-GitHub host, potentially exposing private repositories and other resources allowed by the token's scopes. The issue does not let an unauthenticated attacker access private data and does not directly expose another user's token without an additional same-origin execution or request-forging primitive. This issue is fixed in version 2.2.1. | ||||
| CVE-2026-69138 | 1 Django-cms | 1 Djangocms-versioning | 2026-11-19 | 6.5 Medium |
| djangocms-versioning is a general-purpose versioning package for django CMS 4 and later. Prior to 2.6.1, the check_discard and check_edit_redirect Conditions on djangocms_versioning.models.Version omit user_can_change, while VersionAdmin.discard_view and VersionAdmin.edit_redirect_view obtain a version by its primary key and rely on those conditions for object-level authorization. With CMS_PERMISSION set to True, the affected views are gated only by is_staff, allowing any staff user to select content without object-level change permission. With the default CMS_PERMISSION value of False, a staff user must also hold the global Django change_ permission, but that model-level permission does not enforce the intended per-object authorization, so the user can delete a draft version and its content object through discard or create an editable draft from a published version through edit_redirect even when the user cannot change that specific content object. This issue is fixed in version 2.6.1. | ||||
| CVE-2026-61581 | 1 Datadog | 1 Datadog-agent | 2026-11-19 | 7.4 High |
| The Datadog Agent collects events and metrics from hosts and sends them to Datadog. Prior to datadog-apm-inject 0.66.0, the Datadog Single Step Instrumentation injector stores helper tooling in a predictable host directory. On Linux or Kubernetes systems with SSI enabled and at least one Java service instrumented through SSI, a local unprivileged attacker with shell access to the same host can influence that tooling and execute code with the privileges of the instrumented Java service. Services that use dd-java-agent without SSI and non-Java language runtimes are not affected. This issue is fixed in datadog-apm-inject 0.66.0. | ||||
| CVE-2026-59964 | 1 Troglobit | 1 Uftpd | 2026-11-19 | 5.9 Medium |
| uftpd is a UNIX FTP and TFTP server. Prior to 2.16, uftpd's compose_path function in src/common.c can overflow the fixed dir[PATH_MAX] stack buffer when the server runs without chroot and prepends the configured home directory to a near-PATH_MAX attacker-supplied path using memmove. A logged-in FTP client, including an anonymous or guest client where enabled, can trigger the out-of-bounds write through commands such as CWD, RETR, STOR, or LIST, causing memory corruption and a reliable service crash. Remote code execution has not been demonstrated. This issue is fixed in version 2.16. | ||||