Export limit exceeded: 12252 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 29396 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (29396 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-16664 | 1 Mcu-tools | 1 Mcuboot | 2026-11-16 | 5.1 Medium |
| MCUboot's Zephyr serial-recovery upload handler bs_upload() in boot/boot_serial/src/boot_serial.c decodes the host-supplied image field of an MCUmgr image-upload request into img_num (a full 32-bit value) and latches it on the off == 0 packet without any range check. It then passes img_num straight to flash_area_id_from_multi_image_slot(img_num, 0), which on the Zephyr port resolves to __flash_area_ids_for_slot() in boot/zephyr/include/sysflash/sysflash.h and indexes the static const int all_slots[] table as all_slots[img_num 2]. That table holds only MCUBOOT_IMAGE_NUMBER 2 entries, so any img_num >= MCUBOOT_IMAGE_NUMBER is an out-of-bounds read. The path is reachable by anyone with access to the serial / SMP recovery console, which is unauthenticated by design, and the bad value is supplied before any image signature is verified. The defect is specific to the default non-direct upload path (MCUBOOT_SERIAL_DIRECT_IMAGE_UPLOAD disabled) on the Zephyr port with the array-backed slot layout (not CONFIG_SINGLE_APPLICATION_SLOT). It is not gated on a multi-image configuration: MCUBOOT_IMAGE_NUMBER defaults to 1, so even a default single-image build is affected for any image >= 1. The MCUBOOT_SERIAL_DIRECT_IMAGE_UPLOAD path is safe (its flash_area_id_from_direct_image() switch returns -EINVAL for unknown indices). flash_area_id_from_multi_image_slot() takes a signed int image_index while img_num is uint32_t, so the attacker controls the sign of the index as well as its magnitude: an image of 0xFFFFFFFE converts to -2 and reads all_slots[-4], off the front of the table, while large positive values read off the end (CWE-192). (0xFFFFFFFF itself is the "no image given" sentinel and selects image 0.) Either way the index multiply img * 2 is performed in int, so a wild offset yields a bus/hard fault, giving a reliable denial of service of the bootloader during recovery. For moderately out-of-range indices the read returns adjacent .rodata as a garbage flash-area id that is handed to flash_area_open(); this normally fails with MGMT_ERR_EINVAL, but if the garbage id happens to match a valid non-image partition, the subsequent erase/write can target a partition outside the image set (CWE-787). The attacker-supplied value is never echoed back, so there is no information disclosure. The fix is to reject img_num >= BOOT_IMAGE_NUMBER on the off == 0 packet, before the slot lookup. The comparison must be made on the unsigned img_num: an equivalent guard applied after the conversion to int would not reject the negative case above. __flash_area_ids_for_slot() should bounds-check its own arguments as defence in depth. This vulnerability was reported independently twice: by NVIDIA Project Vanessa on 2026-06-22, and by Kai Phan (@kaimandalic) on 2026-07-19 as GHSA-8v33-88p6-jffj, which is closed as a duplicate of this advisory. Both original reports are reproduced in full below. | ||||
| CVE-2026-129606 | 1 Samsung Open Source | 1 Mtower | 2026-11-16 | 7.1 High |
| Buffer Copy without Checking Size of Input ('Classic Buffer Overflow') vulnerability in Samsung Open Source mTower allows Overflow Buffers. | ||||
| CVE-2026-126957 | 1 Zephyrproject-rtos | 1 Zephyr | 2026-11-16 | 5.3 Medium |
| An integer underflow in Zephyr's IPv4 option handling allows a remote, unauthenticated attacker to read stack memory. When replying to an ICMP Echo Request that carries an IPv4 Record Route or Timestamp option, icmpv4_update_record_route() and icmpv4_update_time_stamp() in subsys/net/ip/icmpv4.c compute the length of the already recorded data as ptr - ptr_offset in uint8_t arithmetic. The attacker-controlled Pointer field is checked against the option length but not against the RFC 791 minimum (4 for Record Route, 5 for Timestamp), so a smaller value wraps the length to up to 252 bytes. net_pkt_write() then reads past the 40-byte opt_data stack buffer and up to 213 bytes of stack memory, which can include stack and heap pointers, are returned in the ICMP Echo Reply. A single packet triggers the leak and the device does not crash, so it can be repeated. Devices built with CONFIG_NET_IPV4_HDR_OPTIONS, which CONFIG_NET_IPV4_IGMP selects, are affected. | ||||
| CVE-2025-10935 | 1 Libilbm | 1 Libilbm | 2026-11-16 | N/A |
| libilbm ILBM File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of libilbm. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of ILBM files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-27792. | ||||
| CVE-2026-111299 | 1 Microsoft | 11 365 Apps, Microsoft 365, Microsoft Office Ltsc 2021 and 8 more | 2026-11-16 | 8.8 High |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-111298 | 1 Microsoft | 11 365 Apps, Microsoft 365, Microsoft Office Ltsc 2021 and 8 more | 2026-11-16 | 8.8 High |
| Out-of-bounds read in Microsoft Office Word allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-111295 | 1 Microsoft | 11 365 Apps, Microsoft 365, Microsoft Office Ltsc 2021 and 8 more | 2026-11-16 | 8.8 High |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-111294 | 1 Microsoft | 11 365 Apps, Microsoft 365, Microsoft Office Ltsc 2021 and 8 more | 2026-11-16 | 8.8 High |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-110066 | 1 Microsoft | 11 365 Apps, Microsoft 365, Microsoft Office Ltsc 2021 and 8 more | 2026-11-16 | 6.5 Medium |
| Out-of-bounds read in Microsoft Office Word allows an unauthorized attacker to disclose information over a network. | ||||
| CVE-2026-110064 | 1 Microsoft | 13 365 Apps, Microsoft 365, Microsoft 365 Apps For Enterprise and 10 more | 2026-11-16 | 8.8 High |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-110062 | 1 Microsoft | 13 365 Apps, Microsoft 365, Microsoft 365 Apps For Enterprise and 10 more | 2026-11-16 | 8.8 High |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-110061 | 1 Microsoft | 11 365 Apps, Microsoft 365, Microsoft Office Ltsc 2021 and 8 more | 2026-11-16 | 8.8 High |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-110056 | 1 Microsoft | 11 365 Apps, Microsoft 365, Microsoft Office Ltsc 2021 and 8 more | 2026-11-16 | 7.8 High |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code locally. | ||||
| CVE-2026-110055 | 1 Microsoft | 11 365 Apps, Microsoft 365, Microsoft Office Ltsc 2021 and 8 more | 2026-11-16 | 8.8 High |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-110054 | 1 Microsoft | 11 365 Apps, Microsoft 365, Microsoft Office Ltsc 2021 and 8 more | 2026-11-16 | 8.8 High |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-115501 | 1 Ibm | 1 I | 2026-11-16 | 5.3 Medium |
| IBM i 7.3 7.4, 7.5, and 7.6 is vulnerable to a stack buffer overflow, caused by improper bounds checking in the QFileSvr.400 file system. By sending a command in the QFileSvr.400 file system, a local authenticated attacker could cause undefined behavior. | ||||
| CVE-2026-95692 | 1 Openssl | 1 Openssl | 2026-11-16 | 7.5 High |
| Issue summary: Setting an AES-GCM-SIV IV shorter than the expected nonce length via EVP_CipherInit_ex() may trigger a heap out-of-bounds read. Supplying a longer IV is silently truncated instead of rejected. Impact summary: An application passing a caller-supplied IV of the wrong length may crash or read beyond its buffer. Because trailing IV bytes are ignored, an attacker who knows one message and tag may forge messages under a different IV. CWE: CWE-125: Out-of-bounds Read Description: AES-GCM-SIV copies the caller-supplied IV or nonce into its internal state using a copy whose length is taken from the expected nonce size rather than from the length the caller actually provided. When the caller passes a shorter IV, the copy reads past the end of the caller's buffer; AddressSanitizer confirms a heap out-of-bounds read reached through EVP_CipherInit_ex() into ossl_aes_gcm_siv_init(). When the caller passes a longer IV, the implementation silently discards the trailing bytes instead of rejecting the length. The truncation breaks the binding between the IV and the computed authentication tag. An attacker who has observed a message and its tag under one IV can produce a message and tag that verify under a different IV whose first bytes match, since the surplus bytes never influence the computation. The message itself is unchanged, so this is a failure of IV commitment rather than a classic existential forgery. Only applications that call EVP_CipherInit_ex() (or the equivalent provider cipher initialization) with an IV length other than the standard 12 bytes for AES-GCM-SIV are affected. The severity is limited because the out-of-bounds read is small and attacker-controlled only in length, and the forgery requires an unusual IV length choice by the application. FIPS impact: no The FIPS modules are not affected by this issue, as AES-GCM-SIV is not an approved algorithm. | ||||
| CVE-2026-52786 | 1 Bacnetstack | 1 Bacnet Stack | 2026-11-16 | 7.1 High |
| BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, in the official apps/epics client tool on v1.6.0-rc1 (not in the generic BACnet RPM ACK decoder alone) a malicious BACnet/IP endpoint can reply to the EPICS tool’s legitimate ReadPropertyMultiple request with a syntactically valid ReadPropertyMultiple-ACK that contains more heading properties than the tool’s fixed local storage can hold. The response is decoded successfully and later consumed by ProcessRPMData(), which writes property values into a fixed global array using an unbounded linear index. This results in a reproducible global-buffer-overflow in apps/epics/main.c. This is a network-reachable memory corruption in the official epics tool’s response-processing path. The root cause is that apps/epics treats a remotely supplied variable-length RPM property list as if it were a trusted, fixed-size local heading-property set. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0. | ||||
| CVE-2026-50080 | 2026-11-16 | 3.3 Low | ||
| Stack-based Buffer Overflow in the ACPI event handler of the QVM could allow an attacker in a guest to crash the QVM by sending a crafted ACPI request. | ||||
| CVE-2026-50078 | 2026-11-16 | 4.4 Medium | ||
| Out-Of-Bounds Read in the MSI-X table in the QVM could allow an attacker in the guest to cause an information disclosure or a crash of the QVM. | ||||