Export limit exceeded: 11622 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Export limit exceeded: 427887 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Export limit exceeded: 16552 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (16552 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-64277 1 Linux 1 Linux Kernel 2026-10-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - bound the F3A keymap to the GPIO count rmi_f3a_initialize() takes the GPIO count from the device query register (f3a->gpio_count = buf & RMI_F3A_GPIO_COUNT, range 0..127). rmi_f3a_map_gpios() then allocates gpio_key_map with min(gpio_count, TRACKSTICK_RANGE_END) == at most 6 entries, but rmi_f3a_attention() iterates the full gpio_count and dereferences gpio_key_map[i], and input->keycodemax is set to the full gpio_count while input->keycode points at the 6-entry allocation. A device that reports gpio_count > 6 therefore causes an out-of-bounds read of gpio_key_map[] on every attention interrupt, and out-of-bounds accesses through the input core's default keymap ioctls: EVIOCGKEYCODE reads past the buffer (leaking adjacent slab memory to user space) and EVIOCSKEYCODE writes a caller-controlled value past it, for any process able to open the evdev node, since input_default_getkeycode() and input_default_setkeycode() only bound the index against keycodemax. Size the keymap for the full gpio_count. The mapping loop is unchanged: it still assigns only the first min(gpio_count, TRACKSTICK_RANGE_END) entries; the remaining slots stay KEY_RESERVED (devm_kcalloc zero-fills) and are skipped when reporting.
CVE-2026-64026 1 Linux 1 Linux Kernel 2026-10-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix DATA decrypt vs splice() by copying data to buffer in recvmsg This improves the fix for CVE-2026-43500. Fix the pagecache corruption from in-place decryption of a DATA packet transmitted locally by splice() by getting rid of the packet sharing in the I/O thread and unconditionally extracting the packet content into a bounce buffer in which the buffer is decrypted. recvmsg() (or the kernel equivalent) then copies the data from the bounce buffer to the destination buffer. The sk_buff then remains unmodified. This has an additional advantage in that the packet is then arranged in the buffer with the correct alignment required for the crypto algorithms to process directly. The performance of the crypto does seem to be a little faster and, surprisingly, the unencrypted performance doesn't seem to change much - possibly due to removing complexity from the I/O thread. Yet another advantage is that the I/O thread doesn't have to copy packets which would slow down packet distribution, ACK generation, etc.. The buffer belongs to the call and is allocated initially at 2K, sufficiently large to hold a whole jumbo subpacket, but the buffer will be increased in size if needed. However, to take this work, MSG_PEEK may cause a later packet to be decrypted into the buffer, in which case the earlier one will need re-decrypting for a subsequent recvmsg(). Note that rx_pkt_offset may legitimately see 0 as a valid offset now, so switch to using USHRT_MAX to indicate an invalid offset. Note also that I would generally prefer to replace the buffers of the current sk_buff with a new kmalloc'd buffer of the right size, ditching the old data and frags as this makes the handling of MSG_PEEK easier and removes the re-decryption issue, but this looks like quite a complicated thing to achieve. skb_morph() looks half way to what I want, but I don't want to have to allocate a new sk_buff.
CVE-2026-64018 1 Linux 1 Linux Kernel 2026-10-19 9.3 Critical
In the Linux kernel, the following vulnerability has been resolved: net: mana: validate rx_req_idx to prevent out-of-bounds array access In mana_hwc_rx_event_handler(), rx_req_idx is derived from sge->address in DMA-coherent memory. In Confidential VMs (SEV-SNP/TDX), this memory is shared unencrypted and HW can modify WQE contents at any time. No bounds check exists on rx_req_idx, which can lead to an out-of-bounds access into reqs[]. Add bounds check on rx_req_idx in mana_hwc_rx_event_handler() before using it to index the reqs[] array.
CVE-2026-64009 1 Linux 1 Linux Kernel 2026-10-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: xfrm: Check for underflow in xfrm_state_mtu Leo Lin reported OOB write issue in esp component: xfrm_state_mtu() returns u32 but performs its arithmetic in unsigned modulo-2^32 space using an attacker-influenced "header_len + authsize + net_adj" subtracted from a small "mtu" argument. A nobody user can install an IPv4 ESP tunnel SA with a large authentication key (XFRMA_ALG_AUTH_TRUNC, e.g. hmac(sha512), 64-byte key, 64-byte trunc), configure a small interface MTU (68 bytes), and set XFRMA_TFCPAD to a large value. When a single UDP datagram is then sent through the tunnel, xfrm_state_mtu() underflows to a near-2^32 value, and esp_output() consumes it as a signed int via: padto = min(x->tfcpad, xfrm_state_mtu(x, mtu_cached)) esp.tfclen = padto - skb->len (assigned to int) esp.tfclen ends up negative (e.g. -207). It is sign-extended to size_t when passed to memset() inside esp_output_fill_trailer(), producing a ~16 EB write of zeroes at skb_tail_pointer(skb). KASAN logs it as "Write of size 18446744073709551537 at addr ffff888...". Check for underflow and return 1. This causes the sendmsg attempt to fail with ENETUNREACH.
CVE-2026-112007 1 Schismtracker 1 Schism Tracker 2026-10-19 6.1 Medium
Schism Tracker through 20260524 contains a heap out-of-bounds write vulnerability in fmt_ult_load_song() in fmt/ult.c that fails to clamp the one-byte sample count to MAX_SAMPLES. Attackers can supply a crafted .ult module that overwrites the instruments pointer array, causing csf_destroy() to free attacker-chosen pointers and crash the application.
CVE-2026-112275 1 Netpbm Project 1 Netpbm 2026-10-19 6.1 Medium
Netpbm through 11.16.00 contains a heap out-of-bounds write vulnerability in the rasttopnm Sun rasterfile run-length decoder pr_load_image in converter/other/rast.c. Attackers can supply a byte-encoded rasterfile with tiny dimensions and a long run-length body to write controlled bytes past md_image, causing memory corruption and crashes.
CVE-2026-58098 1 Freebsd 1 Freebsd 2026-10-19 8.4 High
When semop(2) blocks waiting for a semaphore condition, it releases the per-set lock and sleeps. Upon waking, it checks the sequence number embedded in the semaphore set's IPC identifier to detect whether the set was removed while the caller was asleep. This sequence number is only 15 bits wide. If enough semaphore sets are created and destroyed in the same table slot while a caller is blocked, the counter wraps around, and semop(2) may falsely conclude that the original set still exists. The subsequent access to a semaphore within the set may then be out of bounds. An unprivileged local user can trigger an out-of-bounds access on kernel heap memory, potentially leading to privilege escalation.
CVE-2026-103839 1 Adobe 1 Substance 3d Stager 2026-10-19 7.8 High
Substance3D - Stager is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.
CVE-2026-103838 1 Adobe 1 Substance 3d Stager 2026-10-19 7.8 High
Substance3D - Stager is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.
CVE-2026-103837 1 Adobe 1 Substance 3d Stager 2026-10-19 7.8 High
Substance3D - Stager is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.
CVE-2026-103836 1 Adobe 1 Substance 3d Stager 2026-10-19 7.8 High
Substance3D - Stager is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.
CVE-2026-103835 1 Adobe 1 Substance 3d Stager 2026-10-19 7.8 High
Substance3D - Stager is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.
CVE-2026-103834 1 Adobe 1 Substance 3d Stager 2026-10-19 7.8 High
Substance3D - Stager is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.
CVE-2026-103833 1 Adobe 1 Substance 3d Stager 2026-10-19 7.8 High
Substance3D - Stager is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.
CVE-2026-103832 1 Adobe 1 Substance 3d Stager 2026-10-19 7.8 High
Substance3D - Stager is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.
CVE-2026-53375 1 Linux 1 Linux Kernel 2026-10-19 8.8 High
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vce: Prevent partial address patches In the case that only one of lo/hi is valid, the patching could result in a bad address written to in FW.
CVE-2026-53209 1 Linux 1 Linux Kernel 2026-10-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: reject oversized Broadcast Announcement prepend Existing advertising instances can already hold the maximum extended advertising payload. When hci_adv_bcast_annoucement() prepends the Broadcast Announcement service data to that payload, the combined data may no longer fit in the temporary buffer used to rebuild the advertising data. Reject that case before copying the existing payload and report the failure through the device log. This keeps the existing advertising data intact and avoids overrunning the temporary buffer.
CVE-2026-53203 1 Linux 1 Linux Kernel 2026-10-19 7.1 High
In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Add buffer overflow check in MS get_info_ioctl Add validation that the info size returned from the metric stream info query is not exceeded when checked against the allocated buffer size. If the firmware returns a size larger than the buffer, reject the operation with -EOVERFLOW instead of proceeding with an incorrect buffer copy.
CVE-2026-53202 1 Linux 1 Linux Kernel 2026-10-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Fix signed integer truncation in IPC receive Fix potential buffer overflow where firmware-supplied data_size is cast to signed int before being used in min_t(). Large unsigned values (>= 0x80000000) become negative, causing unsigned wraparound and oversized memcpy operations that can overflow the stack buffer. Change min_t(int, ...) to min() as both values are unsigned and can be handled by min() without explicit cast.
CVE-2026-53194 1 Linux 1 Linux Kernel 2026-10-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: USB: serial: kl5kusb105: fix bulk-out buffer overflow klsi_105_prepare_write_buffer() is called by the generic write path with the bulk-out buffer and its size (bulk_out_size, 64 bytes). It stores a two-byte length header at the start of the buffer and copies the payload from the write fifo starting at buf + KLSI_HDR_LEN, but passes the full buffer size as the number of bytes to copy: count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN, size, &port->lock); When the fifo holds at least size bytes, size bytes are copied starting two bytes into the size-byte buffer, writing KLSI_HDR_LEN bytes past its end. Copy at most size - KLSI_HDR_LEN bytes instead, leaving room for the header as safe_serial already does. Writing bulk_out_size or more bytes to the tty triggers a slab out-of-bounds write, observed with KASAN by emulating the device with dummy_hcd and raw-gadget: BUG: KASAN: slab-out-of-bounds in kfifo_copy_out+0x83/0xc0 Write of size 64 at addr ffff888112c62202 by task python3 kfifo_copy_out klsi_105_prepare_write_buffer [kl5kusb105] usb_serial_generic_write_start [usbserial] Allocated by task 139: usb_serial_probe [usbserial] The buggy address is located 2 bytes inside of allocated 64-byte region The out-of-bounds write no longer occurs with this change applied.