Export limit exceeded: 16913 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (16913 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80793 | 1 Linux | 1 Linux Kernel | 2026-11-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: reject undersized MTUs in ip_do_fragment() ip_do_fragment() subtracts the IPv4 header length from the effective MTU and passes the resulting payload MTU to ip_frag_next(). If the effective MTU is smaller than hlen + 8, ip_frag_next() rounds the fragment payload length down to zero. The fragmentation state then never makes forward progress: state->left, state->ptr and state->offset stay unchanged while ip_do_fragment() keeps allocating and transmitting header-only fragments until the softlockup detector fires. This is reproducible with a route installed using "mtu lock 20", but it is also reproducible without route MTU lock, for example by forwarding a packet to a device whose MTU is 20. Fix it in ip_do_fragment() by rejecting mtu < hlen + 8 with -EMSGSIZE, matching the existing IPv6 fragmentation check. | ||||
| CVE-2026-80742 | 1 Linux | 1 Linux Kernel | 2026-11-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: af_packet: Don't send zero-byte data in tpacket_snd(). syzbot reported a WARNING in __dev_queue_xmit() triggered via tpacket_snd(): skb_assert_len WARNING: at include/linux/skbuff.h:2753 skb_assert_len WARNING: at __dev_queue_xmit+0x21bc/0x4970 net/core/dev.c:4781 Call Trace: <TASK> dev_queue_xmit include/linux/netdevice.h:3448 [inline] packet_xmit+0x243/0x310 net/packet/af_packet.c:276 tpacket_snd net/packet/af_packet.c:2907 [inline] packet_sendmsg+0x28d6/0x4eb0 net/packet/af_packet.c:3134 When sending 0-byte packets via TPACKET ring buffer on devices with no hard header (e.g. dev->hard_header_len == 0), tpacket_fill_skb() populates an skb with skb->len == 0 and returns 0. tpacket_snd() then forwards this empty skb to packet_xmit(), causing __dev_queue_xmit() to hit skb_assert_len(skb). Similar checks exist in packet_snd() via commit dc633700f00f ("net/af_packet: check len when min_header_len equals to 0") and in packet_sendmsg_spkt() via commit 6a341729fb31 ("af_packet: Don't send zero-byte data in packet_sendmsg_spkt()."). Return -EINVAL in tpacket_fill_skb() when skb->len is zero to reject zero-length packets in tpacket_snd(). | ||||
| CVE-2026-80644 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: don't BUG_ON an invalid journal dinode [BUG] A fuzzed OCFS2 image can corrupt the current slot journal dinode while mount is still in progress. The mount path first reports the invalid journal block and then crashes in shutdown: kernel BUG at fs/ocfs2/journal.c:1034! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:ocfs2_journal_toggle_dirty+0x2d6/0x340 fs/ocfs2/journal.c:1034 Call Trace: ocfs2_journal_shutdown+0x414/0xc30 fs/ocfs2/journal.c:1116 ocfs2_mount_volume fs/ocfs2/super.c:1785 [inline] ocfs2_fill_super+0x30a9/0x3cd0 fs/ocfs2/super.c:1083 get_tree_bdev_flags+0x38b/0x640 fs/super.c:1698 get_tree_bdev+0x24/0x40 fs/super.c:1721 ocfs2_get_tree+0x21/0x30 fs/ocfs2/super.c:1184 vfs_get_tree+0x9a/0x370 fs/super.c:1758 fc_mount fs/namespace.c:1199 [inline] do_new_mount_fc fs/namespace.c:3642 [inline] do_new_mount fs/namespace.c:3718 [inline] path_mount+0x5b8/0x1ea0 fs/namespace.c:4028 do_mount fs/namespace.c:4041 [inline] __do_sys_mount fs/namespace.c:4229 [inline] __se_sys_mount fs/namespace.c:4206 [inline] __x64_sys_mount+0x282/0x320 fs/namespace.c:4206 ... [CAUSE] ocfs2_journal_toggle_dirty() used to return -EIO when journal->j_bh no longer contained a valid dinode, because the startup and shutdown paths already handled that failure. Commit 10995aa2451a ("ocfs2: Morph the haphazard OCFS2_IS_VALID_DINODE() checks.") changed the check to a BUG_ON() under the assumption that the journal dinode had already been validated. That turns an unexpected invalid journal dinode during mount teardown into a kernel crash instead of a normal mount failure. [FIX] Replace the BUG_ON() with WARN_ON() and return -EIO. This keeps the invariant warning for debugging, but restores the original behavior of failing startup or shutdown cleanly instead of panicking the kernel. | ||||
| CVE-2026-74547 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (adt7470) Fix busy-loop and I2C flooding in update thread When userspace configures 'auto_update_interval' to 0 via sysfs, the background kthread executes schedule_timeout_interruptible(0), which returns immediately. If 'num_temp_sensors' is concurrently or previously set to 0, the msleep_interruptible() delay inside adt7470_read_temperatures() also becomes 0. This combination forces the background thread into a tight, unbounded busy-loop, hogging the CPU and flooding the I2C bus with a continuous stream of transactions. Fix this vulnerability by raising the lower limit of the clamp_val in auto_update_interval_store() from 0 to 500 milliseconds. This guarantees a reasonable minimum sleep window between sensor updates, protecting the system from intentional or accidental I2C bus denial of service. | ||||
| CVE-2026-73322 | 1 Apache | 1 Pinot | 2026-11-06 | 6.5 Medium |
| Incorrect Authorization vulnerability in the single-stage query engine of Apache Pinot. When broker access control is enabled, the single-stage query engine authorizes only the table named in the query's FROM clause. The lookup() transform function identifies its dimension table with a string literal argument rather than through the FROM clause, so that table was never included in the authorization check. An authenticated user who is authorized for at least one table can therefore read columns from any dimension table in the cluster, including tables they have no access to, and can retrieve arbitrary rows of it by supplying primary key values directly. Per-principal row-level security filters configured on the dimension table are likewise not applied. The multi-stage query engine is not affected. This issue affects Apache Pinot: through 1.5.1 Users are recommended to upgrade to version 1.6.0, which fixes this issue. | ||||
| CVE-2026-72159 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: reject non-inline dinodes with i_size and zero i_clusters On a volume mounted without OCFS2_FEATURE_INCOMPAT_SPARSE_ALLOC, a non-inline regular file with non-zero i_size and zero i_clusters is structurally malformed: the extent map declares no allocated clusters yet the size header claims content exists. Keep rejecting that shape, but express it through a shared predicate so the same invariant is available to normal inode reads and online filecheck. The same zero-cluster shape is also malformed for non-inline directories. ocfs2 directory growth allocates backing storage before advancing i_size, and ocfs2_dir_foreach_blk_el() later walks until ctx->pos reaches i_size_read(inode). A forged directory dinode with a huge i_size and no clusters would repeatedly fail on holes while advancing through the claimed size. Sparse regular files remain exempt: on sparse-alloc volumes, truncate can legitimately grow i_size without allocating clusters. System inodes and inline-data dinodes also retain their separate storage rules. Mirror the check in ocfs2_filecheck_validate_inode_block() as well. filecheck reports through its own error namespace, so malformed size/cluster state is logged as a filecheck invalid-inode result rather than via ocfs2_error(), but it must not proceed into ocfs2_populate_inode(). | ||||
| CVE-2026-72096 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm-verity: make error counter atomic The error counter "v->corrupted_errs" was not atomic, thus it could be subject to race conditions. The call to dm_audit_log_target("max-corrupted-errors") may be skipped due to the races. | ||||
| CVE-2026-72063 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpio: tegra: do not call pinctrl for GPIO direction tegra_gpio_direction_input() and tegra_gpio_direction_output() already program the GPIO controller direction registers directly. The additional pinctrl_gpio_direction_input/output() calls do not add a Tegra pinctrl operation, because the Tegra pinmux ops provide GPIO request/free handling but no gpio_set_direction hook. The extra call still enters the pinctrl core and takes pctldev->mutex. Shared GPIO users can call the direction path while holding their per-line spinlock, so this otherwise redundant pinctrl direction call can sleep in an atomic context. This was found by our static analysis tool and then confirmed by manual review of tegra_gpio_probe(), the Tegra GPIO direction callbacks and the Tegra pinctrl ops. The reviewed path has a default non-sleeping struct gpio_chip while the direction callback still enters the pinctrl mutex path. A directed runtime validation kept the same non-sleeping chip registration and drove: gpio_shared_proxy_direction_output() gpiod_direction_output_raw_commit() tegra_gpio_direction_output() pinctrl_gpio_direction_output() Lockdep reported a sleep-in-atomic warning with the shared GPIO spinlock held and pinctrl_get_device_gpio_range() plus tegra_gpio_direction_output() on the stack. Do not mark the whole chip as can_sleep to paper over this: can_sleep describes whether get()/set() may sleep, and Tegra value access is MMIO. Remove the redundant pinctrl direction calls and keep pinctrl involvement in the existing request/free path. | ||||
| CVE-2026-68430 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx8: drop unecessary BUG_ON() There's no need to crash the kernel for this case. (cherry picked from commit 4d7c25208ca612b754f3bf39e9f16e725b828891) | ||||
| CVE-2026-68396 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: core: wake eh reliably when using scsi_schedule_eh Drivers which use the scsi_schedule_eh function to run the error handler currently risk the error handler thread never waking once all commands are timed out or inactive. There is no enforced memory order between setting the host into error recovery state and counting busy commands. This can result in a race with scsi_dec_host_busy where neither CPU sees both conditions of all commands inactive and the host error state to request waking the error handler. To fix this, run the scsi_schedule_eh's scsi_eh_wakeup from a new work item which will use rcu to ensure scsi_schedule_eh's call to scsi_host_busy will occur after the error state is globally visible and will be seen by any current scsi_dec_host_busy callers. | ||||
| CVE-2026-68304 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix 802.1X-SHA256 call trace warning Based on wpa_auth as 1x_256 mode, need to set up "use_fwsup" with BRCMF_PROFILE_FWSUP_1X. Or it will happen trace warning when call brcmf_cfg80211_set_pmk(). [ 4481.831101] ------------[ cut here ]------------ [ 4481.831102] WARNING: CPU: 1 PID: 2997 at drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:7242 brcmf_cfg80211_set_pmk+0x77/0xd0 [brcmfmac] [...] [ 4481.831202] Call Trace: [ 4481.831204] <TASK> [ 4481.831205] nl80211_set_pmk+0x183/0x250 [cfg80211] [ 4481.831233] genl_family_rcv_msg_doit+0xea/0x150 [ 4481.831237] genl_rcv_msg+0x104/0x240 [ 4481.831239] ? cfg80211_probe_status+0x2c0/0x2c0 [cfg80211] [ 4481.831257] ? genl_family_rcv_msg_doit+0x150/0x150 [ 4481.831259] netlink_rcv_skb+0x4e/0x100 [ 4481.831261] genl_rcv+0x24/0x40 [ 4481.831262] netlink_unicast+0x236/0x380 [ 4481.831264] netlink_sendmsg+0x250/0x4b0 [ 4481.831266] sock_sendmsg+0x5c/0x70 [ 4481.831269] ____sys_sendmsg+0x236/0x2b0 [ 4481.831271] ? copy_msghdr_from_user+0x6d/0xa0 [ 4481.831272] ___sys_sendmsg+0x86/0xd0 [ 4481.831274] ? avc_has_perm+0x8c/0x1a0 [ 4481.831276] ? preempt_count_add+0x6a/0xa0 [ 4481.831279] ? sock_has_perm+0x82/0xa0 [ 4481.831280] __sys_sendmsg+0x57/0xa0 [ 4481.831282] do_syscall_64+0x38/0x90 [ 4481.831284] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 4481.831286] RIP: 0033:0x7fd270d369b4 | ||||
| CVE-2026-68250 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/sdma5.2: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit ae658afc7f47f6147371ec42cc6b1a793dfdb5af) | ||||
| CVE-2026-68249 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/sdma5.0: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit 8d144a0eb09537055841af48c9e7c2d4cd48e84d) | ||||
| CVE-2026-68133 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix PTP Call Trace during PTP release If a PF reset occurs when the PTP state is ICE_PTP_UNINIT, then ice_ptp_rebuild() will update the state to ICE_PTP_ERROR. This will result in the following PTP release call trace during driver unload: kernel BUG at lib/list_debug.c:52! ice_ptp_release+0x332/0x3c0 [ice] ice_deinit_features.part.0+0x10e/0x120 [ice] ice_remove+0x100/0x220 [ice] This was observed when passing PF1 through to a VM. ice_ptp_init() fails because ctrl_pf is NULL and sets the state to ICE_PTP_UNINIT. Fix by detecting the ICE_PTP_UNINIT state in ice_ptp_rebuild() and returning without error, preventing the invalid state transition to ICE_PTP_ERROR. The only valid path to ICE_PTP_ERROR is from ICE_PTP_RESETTING after a failed rebuild. | ||||
| CVE-2026-68115 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx10: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit ac6f00beb658239bced4aaed9efbb04a35348d48) | ||||
| CVE-2026-68111 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx9: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit b71604f8685b0eba07866f4e8dc30f93e1931054) | ||||
| CVE-2026-68093 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Bump asid_generation on CPU online to avoid ASID collision after hotplug If a vCPU stays scheduled out (or blocked) while the last pCPU it ran on goes through a hotplug cycle (online->offline->online), and the vCPU then resumes execution on the same pCPU, then it is possible for it to run with an ASID that has now been assigned to a different vCPU, resulting in stale TLB translations being used. svm_enable_virtualization_cpu() resets asid_generation to 1 and sets next_asid to max_asid + 1 on every CPU online event, including hotplug cycles. Because next_asid starts beyond the pool boundary, the first call to new_asid() after an online event always wraps the pool, incrementing asid_generation to 2 and assigning ASIDs starting from min_asid. Consider two vCPUs from different VMs, vCPU-A pinned to CPU-X holding asid_generation=2 and ASID=N from before the hotplug event: 1. CPU-X goes offline and back online: asid_generation resets to 1, next_asid = max_asid + 1. 2. One or more vCPUs migrate to CPU-X and call new_asid(), wrapping the pool and consuming ASIDs starting from min_asid. Eventually vCPU-B from a different VM is assigned asid_generation=2, ASID=N — the same ASID that vCPU-A held before the hotplug. 3. vCPU-A enters pre_svm_run() on CPU-X: current_vmcb->cpu is unchanged so the migration branch is skipped. Its saved asid_generation=2 matches sd->asid_generation=2, so the generation check silently passes and vCPU-A continues running with ASID=N — the same ASID just freshly assigned to vCPU-B. Both vCPUs from different VMs now run on CPU-X with the same ASID, causing them to share NPT TLB entries and producing stale translations. The collision manifests as a KVM internal error (Suberror: 1, emulation failure). The NPT page fault reports a faulting GPA far outside the VM's physical memory range — a sign of stale TLB translations being used. KVM falls back to instruction emulation, which fails on FPU/XSave instructions (XRSTOR, STMXCSR) that the emulator does not implement. Fix this by incrementing asid_generation instead of resetting it to 1 in svm_enable_virtualization_cpu(). On module load, asid_generation starts at 0 (memset) and the increment produces 1, identical to the old behaviour. On subsequent hotplug cycles the generation advances beyond any value a vCPU previously observed on this CPU, so the generation check in pre_svm_run() reliably forces new_asid() on every vCPU after every hotplug cycle. | ||||
| CVE-2026-64347 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: composite: fix dead empty check in the USB_DT_OTG handler The OTG branch of composite_setup() falls back to the first configuration when none is selected: if (cdev->config) config = cdev->config; else config = list_first_entry(&cdev->configs, struct usb_configuration, list); if (!config) goto done; ... memcpy(req->buf, config->descriptors[0], value); list_first_entry() never returns NULL. On an empty list it returns container_of() of the list head. So the "if (!config)" check is dead. When cdev->configs is empty, config points at the head inside struct usb_composite_dev. config->descriptors[0] reads whatever sits at that offset. The memcpy copies up to w_length bytes of it into the response buffer. cdev->configs can be empty in two cases. One is a teardown race on gadget unbind with a control transfer in flight. The other is a driver that sets is_otg before it adds a config. A reproducer that holds cdev->configs empty triggers a KASAN fault in this branch. Use list_first_entry_or_null() so the existing check does its job. | ||||
| CVE-2026-64334 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix hard lockup on disconnect If submitting the OOB write urb fails persistently (e.g if the device is being disconnected) the driver would loop indefinitely with interrupts disabled. Check for urb submission errors when sending OOB commands to avoid hanging if, for example, open(), set_termios() or close() races with a physical disconnect. This is issue was flagged by Sashiko when reviewing an unrelated change to the driver. | ||||
| CVE-2026-64289 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Set upper bounds on cache invalidation entry_num and entry_len iommufd_hwpt_invalidate() takes a user-controlled entry_num and entry_len, each bounded only by U32_MAX. An entry_len beyond the kernel's struct size makes the copy helper verify the extra bytes are zero, scanning that excess in one uninterruptible pass; a multi-gigabyte value over zeroed user memory trips the soft-lockup watchdog. A large entry_num is the other half, driving the backend invalidation loop with no reschedule. The VT-d nested handler, for one, copies each entry and flushes caches per iteration, pinning the CPU on a non-preemptible kernel. Cap both in the ioctl. entry_len is held under PAGE_SIZE, above any request struct, and entry_num under 1 << 19, the order of a hardware invalidation queue and well beyond any real batch, bounding the per-call loop length. | ||||