| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: fix kernel NULL pointer dereference when replacing free hugetlb folios
A kernel crash was observed when replacing free hugetlb folios:
BUG: kernel NULL pointer dereference, address: 0000000000000028
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 28 UID: 0 PID: 29639 Comm: test_cma.sh Tainted 6.15.0-rc6-zp #41 PREEMPT(voluntary)
RIP: 0010:alloc_and_dissolve_hugetlb_folio+0x1d/0x1f0
RSP: 0018:ffffc9000b30fa90 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000342cca RCX: ffffea0043000000
RDX: ffffc9000b30fb08 RSI: ffffea0043000000 RDI: 0000000000000000
RBP: ffffc9000b30fb20 R08: 0000000000001000 R09: 0000000000000000
R10: ffff88886f92eb00 R11: 0000000000000000 R12: ffffea0043000000
R13: 0000000000000000 R14: 00000000010c0200 R15: 0000000000000004
FS: 00007fcda5f14740(0000) GS:ffff8888ec1d8000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000028 CR3: 0000000391402000 CR4: 0000000000350ef0
Call Trace:
<TASK>
replace_free_hugepage_folios+0xb6/0x100
alloc_contig_range_noprof+0x18a/0x590
? srso_return_thunk+0x5/0x5f
? down_read+0x12/0xa0
? srso_return_thunk+0x5/0x5f
cma_range_alloc.constprop.0+0x131/0x290
__cma_alloc+0xcf/0x2c0
cma_alloc_write+0x43/0xb0
simple_attr_write_xsigned.constprop.0.isra.0+0xb2/0x110
debugfs_attr_write+0x46/0x70
full_proxy_write+0x62/0xa0
vfs_write+0xf8/0x420
? srso_return_thunk+0x5/0x5f
? filp_flush+0x86/0xa0
? srso_return_thunk+0x5/0x5f
? filp_close+0x1f/0x30
? srso_return_thunk+0x5/0x5f
? do_dup2+0xaf/0x160
? srso_return_thunk+0x5/0x5f
ksys_write+0x65/0xe0
do_syscall_64+0x64/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
There is a potential race between __update_and_free_hugetlb_folio() and
replace_free_hugepage_folios():
CPU1 CPU2
__update_and_free_hugetlb_folio replace_free_hugepage_folios
folio_test_hugetlb(folio)
-- It's still hugetlb folio.
__folio_clear_hugetlb(folio)
hugetlb_free_folio(folio)
h = folio_hstate(folio)
-- Here, h is NULL pointer
When the above race condition occurs, folio_hstate(folio) returns NULL,
and subsequent access to this NULL pointer will cause the system to crash.
To resolve this issue, execute folio_hstate(folio) under the protection
of the hugetlb_lock lock, ensuring that folio_hstate(folio) does not
return NULL. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 17.2 before 19.3.9, 19.4 before 19.4.8, and 19.5 before 19.5.6 that under certain conditions could have allowed an authenticated user with a valid agent token to cause a denial of service in the GitLab agent server (KAS) due to improper input validation. |
| The Libreswan pluto daemon dereferences a NULL pointer when a CERT payload is received with an empty PKCS#7 payload, causing the daemon to crash and restart. The NSS function SEC_PKCS7GetCertificateList() was used to check whether the content was empty, but this check did not trigger if the non-empty content of the PKCS#7 wrapped payload was an empty list. Continued triggering of this vulnerability can lead to a denial of service. Remote code execution is not possible. Authentication is not required to trigger this vulnerability. |
| bt_att_find_req_by_user_data() in subsys/bluetooth/host/att.c walks every ATT channel attached to a connection and dereferences chan->req->user_data without checking chan->req. An ATT channel with no client request in flight holds chan->req == NULL — that is its normal idle state, set by att_handle_rsp() when a response resolves the transaction and tested by att_req_send_process() to pick a free channel — so the lookup reads through a NULL pointer as soon as it visits an idle channel. Every other chan->req user in the file already guards the pointer.
The lookup is reached from the public bt_gatt_cancel() API and, more importantly, from the host itself: bt_gatt_unsubscribe() calls bt_gatt_cancel() while a subscribe CCC write is still outstanding (BT_GATT_SUBSCRIBE_FLAG_WRITE_PENDING), and call_notify_cb_and_maybe_unsubscribe() in subsys/bluetooth/host/gatt.c invokes bt_gatt_unsubscribe() from the RX path whenever an application notify callback returns BT_GATT_ITER_STOP. A malicious or malfunctioning peer can hold the trigger window open by withholding the ATT Write Response to the CCC write and then sending a notification for the subscribed handle. With CONFIG_BT_EATT the traversal is very likely to meet an idle sibling channel, since ATT channels are prepended to the list and a channel opened after the pending request was sent is visited first.
The dereference is a read of a small constant offset from address zero, so the impact is availability only: no memory corruption, no attacker-chosen address and no information disclosure. On platforms and configurations where a near-NULL read traps — TrustZone non-secure images, MMU targets, native_sim, or builds with CONFIG_NULL_POINTER_EXCEPTION_DETECTION_MPU/_DWT — the fault occurs in the Bluetooth RX context and results in a fatal error and device reset. On a plain Cortex-M build with the vector table mapped at address 0 and null-pointer detection disabled (the default) the read succeeds and the defect is inert.
The fix adds an explicit chan->req != NULL test to the channel traversal and additionally rejects a NULL user_data argument, which would otherwise have matched, and cancelled, an unrelated request. |
| The ITE IT8xxx2 SHI host-command backend in subsys/mgmt/ec_host_cmd/backends/ec_host_cmd_backend_shi_ite.c arms the SPI peripheral before its receive context exists. shi_ite_init_registers() sets the state machine to SHI_STATE_READY_TO_RECV and calls irq_enable() while the device initializes at POST_KERNEL priority CONFIG_KERNEL_INIT_PRIORITY_DEFAULT (40), but data->rx_ctx and data->tx are only assigned later by shi_ite_backend_init(), which ec_host_cmd_init() invokes at CONFIG_EC_HOST_CMD_INIT_PRIORITY (default 80).
If the attached host processor starts a SPI transaction inside that window, the Rx-valid-length interrupt fires, shi_ite_int_handler() passes its state check and calls shi_ite_parse_header(), which stores the host-derived request length through the still-NULL data->rx_ctx. On the IT8xxx2 low addresses are not backed by RAM, and with CONFIG_NULL_POINTER_EXCEPTION_DETECTION_PMP the first bytes of the address space are explicitly made inaccessible, so the store raises a fatal access fault in interrupt context. The window widens further when CONFIG_EC_HOST_CMD_INITIALIZE_AT_BOOT is disabled and the application calls ec_host_cmd_init() itself.
The result is a kernel panic on the embedded controller: with Zephyr's default fatal handler the CPU halts, so the controller stops servicing host commands until a hardware reset. Because the trigger is traffic from the attached host processor -- an untrusted peer from the controller firmware's point of view -- software on that host can provoke the fault by forcing a controller reset and issuing transactions during the reboot, turning a recoverable reset into a persistent outage. Impact is limited to availability: the faulting address is fixed and not attacker-chosen, so no memory-corruption primitive follows.
The fix leaves the interface at SHI_STATE_DISABLED with the interrupt masked during device init, moves irq_enable() into shi_ite_backend_init() after the buffers are published, and makes shi_ite_int_handler() reject a NULL data->rx_ctx while write-clearing IT83XX_SPI_ISR and IT83XX_SPI_RX_VLISR so that an unexpected early interrupt cannot storm. |
| A deferred-callback use-after-destroy in Node.js TLS server handshake handling allows a remote, unauthenticated attacker to terminate the server process. When a TLS server uses any of the SNICallback, OCSPRequest, newSession, or resumeSession hooks, or server.addContext(), the corresponding OpenSSL callbacks are deferred, and the deferred code does not handle the underlying socket being destroyed between scheduling and execution. By sending a client hello that reaches the vulnerable path (for example, no SNI together with an OCSP request) followed by padding and a socket FIN, an attacker makes OpenSSL deliver the client hello and the end-of-file in the same tick, so the socket is destroyed before the deferred callback runs and the process raises an uncaught exception instead of emitting an 'error' event. This vulnerability affects Node.js 26.x and 24.x. |
| A NULL pointer dereference in Node.js HTTP/2 lets an unauthenticated client crash the server, over both TLS and cleartext, by cancelling file downloads. When the server serves a file with stream.respondWithFile() or stream.respondWithFD() and the client cancels the request, a StreamPipe used for the transfer is torn down in an order that leaves a NULL pointer which is then dereferenced, aborting the process. No crafted frames are needed, and a handful of cancelled requests against a default file-serving handler is enough. This vulnerability affects Node.js 26.x, 24.x, and 22.x. |
| GPAC before 26.07.0 contains a NULL pointer dereference vulnerability in gf_node_get_tag() that allows attackers to crash the process via crafted XMT connect elements. Attackers can supply an XMT scene file whose connect element has a parent with no node, crashing MP4Box during processing and causing denial of service. |
| A flaw was found in SSSD's PAM responder. A local attacker can send an authentication request without first negotiating the client protocol version. The responder dereferences a NULL protocol-version pointer and crashes, disrupting SSSD-backed authentication. Repeated crafted requests can sustain the denial of service. |
| On affected Arista EOS platforms running Border Gateway Protocol with Link State ( BGP-LS) and configured with the Dynamic Path Selection (DPS) consumer role, an attacker who has established an authenticated BGP-LS session with the device can send a crafted message to cause the BGP agent to restart unexpectedly. An Arista Pathfinder deployment is not required. |
| GPAC before 26.02.0 contains a NULL pointer dereference vulnerability in gf_node_get_field_by_name() in src/scenegraph/base_scenegraph.c that lets attackers crash applications. Attackers can supply a crafted XMT scene referencing a never-created node to crash MP4Box or GPAC scene loader applications, causing denial of service. |
| GPAC before 26.02.0 contains a NULL pointer dereference vulnerability in m2tsdmx_update_sdt() in src/filters/dmx_m2ts.c that allows attackers to crash the MPEG-2 TS demuxer. Attackers can supply a crafted .ts file with an invalid service descriptor leaving service or provider names NULL to crash MP4Box and cause denial of service. |
| Null pointer dereference for some Intel(R) Wireless Bluetooth(R) within Ring 0: Kernel may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| GPAC before 26.02.0 contains a NULL pointer dereference vulnerability in gf_dash_group_get_audio_channels() in src/media_tools/dash_client.c that allows attackers to crash applications via crafted DASH manifests. Attackers can supply an MPD whose AudioChannelConfiguration element omits schemeIdUri or value, crashing MP4Box or GPAC DASH clients and causing denial of service. |
| Invalid pointer in the DOM: Streams component. This vulnerability was fixed in Firefox 160, Firefox ESR 153.7, Thunderbird 160, and Thunderbird 153.7. |
| Invalid pointer in the Layout: Text and Fonts component. This vulnerability was fixed in Firefox 160, Firefox ESR 153.7, Thunderbird 160, and Thunderbird 153.7. |
| Invalid pointer in the Layout: Text and Fonts component. This vulnerability was fixed in Firefox 160, Firefox ESR 153.7, Thunderbird 160, and Thunderbird 153.7. |
| Invalid pointer in the Networking: Cache component. This vulnerability was fixed in Firefox 160, Firefox ESR 153.7, Thunderbird 160, and Thunderbird 153.7. |
| Invalid pointer in the DOM: Editor component. This vulnerability was fixed in Firefox 160, Firefox ESR 153.7, Thunderbird 160, and Thunderbird 153.7. |
| LibreOffice can import EMF, EMF+ and WMF images, which may be embedded in documents. Several out-of-bounds reads existed in the readers for these formats, because sizes, counts and offsets taken from a crafted image were not checked against the data the image actually holds. In fixed versions these values are checked against the size of each record and the data that remains, and a record that fails the checks is not used. |