| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xhci: Fix bounce buffer overflow
High-speed devices with out of spec 1024 byte bulk endpoints exist and
are allowed by USB core, but xhci-hcd always sets packet size to 512.
The exact nature of these devices isn't documented, commit fb5ee84ea72c
("USB: Accept bulk endpoints with 1024-byte maxpacket") only states
that they "don't work with xHCI host controllers", whatever it means.
But somebody (or a malicious device) can try, and then the driver will
allocate a 512 byte bounce buffer for this endpoint and may write up to
1024 bytes into it if particular scatter-gather URBs are used, because
xhci_align_td() obtains packet size from the descriptor. Fix this.
As a side effect, TRBs will be aligned to the packet size chosen by the
driver on all endpoints of all speeds. Alignment serves the xHC, not
device, so this is fine. Only out of spec devices are affected anyway. |
| Memory overflow in Packet Processing can lead to unpredictable or erroneous behavior or Denial of Service in NetScaler ADC and NetScaler Gateway. |
| Memory overflow in the management plane can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway. |
| Memory overflow in NetScaler Push can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler |
| Memory corruption in DNS / DNS-over-HTTPS (DoH) can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler |
| Memory overflow in SMPP traffic can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler |
| Memory overflow in SSL/TLS/DTLS can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway. |
| A kernel pool buffer overflow vulnerability in the
ct0531fl.sys file of the Creative WDM Audio Driver (64-bit), Sound Blaster Audigy 4
and Sound Blaster Audigy 5/Rx could allow a local
attacker with low privilege access to cause a denial of service. |
| A vulnerability was detected in D-Link DIR-600L 2.17/2.17b02. Affected by this vulnerability is the function authenticationcgi_main of the file authentication.cgi. Performing a manipulation of the argument id/password results in stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit is now public and may be used. |
| A security vulnerability has been detected in sox_ng up to 14.8.1. Affected by this issue is the function read_samples_voc of the file src/voc.c of the component VOC Decoder. Such manipulation leads to out-of-bounds write. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. The name of the patch is 0b40408b. A patch should be applied to remediate this issue. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
| A vulnerability was found in DrayTek Vigor2960 1.5.1.6. This issue affects the function check_file_exist of the file /cgi-bin/mainfunction.cgi of the component File Existence Check. Performing a manipulation of the argument upload_name results in heap-based buffer overflow. The attack may be initiated remotely. The exploit has been made public and could be used. Upgrading to version 1.5.1.7 is capable of addressing this issue. Upgrading the affected component is recommended. The vendor recommends: "1.5.1.6 isn't the latest version of 2960, the latest version fixes many security issues. And we have another one in our release plan which should solve the issues reported." |
| A vulnerability was detected in TRENDnet TEW-657BRM 1.00.1. This issue affects some unknown processing of the file /usr/sbin/upgrade_flash.cgi. Performing a manipulation of the argument boundary results in stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit is now public and may be used. The vendor explains: ""I am not able to confirm if such vulnerability exists as the product has been EOL for more than 15 years. We will send out an announcement letting customers know." |
| A security vulnerability has been detected in Edimax BR6478ACV2 1.23. The impacted element is the function formPPTPSetup of the file webs. The manipulation of the argument pptpUserName leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Building a malicious package that uses cgo could bypass "#cgo LDFLAGS" validation and cause unexpected code execution at build time, or cause the go command to panic, via crafted quoting in "//go:cgo_ldflag" directives. When "cmd/cgo" generates "_cgo_gotypes.go", it quotes each "#cgo LDFLAGS" argument with strconv.Quote in a "//go:cgo_ldflag" directive, but "cmd/compile" and "cmd/go" parsed those directives by splitting on raw quote characters without handling backslash escapes or unquoting the string. This mismatch allowed disallowed linker flags or unvalidated linker search paths to be smuggled past the go command's flag checks and passed to the external linker. In addition, deduplicating LDFLAGS in the go command could panic with an out-of-bounds slice index when a prefix of the flag list matched near the end of the slice. "cmd/compile" and "cmd/go" now properly handle backslash-escaped quotes and unquote "//go:cgo_*" pragma strings with strconv.Unquote, and the slice bounds check in processCgoOutputs has been fixed. |
| OriginLab Origin Viewer OGM File Parsing Memory Corruption Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of OriginLab Origin Viewer. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of OGM files. The issue results from the lack of proper validation of user-supplied data, which can result in a memory corruption condition. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-30770. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-rdma: reject short connection requests
nvmet_rdma_parse_cm_connect_req() treats RDMA-CM private data as a
struct nvme_rdma_cm_req but accepts any nonzero private_data_len. The
iWARP path allocates exactly the peer-provided length, so a six-byte MPA
request reaches the parser and the hsqsize load reads two bytes past the
allocation.
Require the complete request structure before reading any of its fields.
The decoded KASAN report is:
BUG: KASAN: slab-out-of-bounds in nvmet_rdma_cm_handler
(drivers/nvme/target/rdma.c:1427 drivers/nvme/target/rdma.c:1475
drivers/nvme/target/rdma.c:1614 drivers/nvme/target/rdma.c:1814)
Read of size 2 at addr ff1100010459d366 by task kworker/u16:1/41
Workqueue: iw_cm_wq cm_work_handler
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
nvmet_rdma_cm_handler
(drivers/nvme/target/rdma.c:1427 drivers/nvme/target/rdma.c:1475
drivers/nvme/target/rdma.c:1614 drivers/nvme/target/rdma.c:1814)
cma_cm_event_handler (drivers/infiniband/core/cma.c:2181)
iw_conn_req_handler (drivers/infiniband/core/cma.c:2640)
cm_work_handler
(drivers/infiniband/core/cm.c:2502
drivers/infiniband/core/cm.c:3858)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
</TASK>
Allocated by task 12:
__kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415)
__kmalloc_node_track_caller_noprof
(mm/slub.c:5414 mm/slub.c:5545)
kmemdup_noprof (mm/util.c:138)
cm_event_handler
(drivers/infiniband/core/iwcm.c:194
drivers/infiniband/core/iwcm.c:1076)
siw_cm_upcall (drivers/infiniband/sw/siw/siw_cm.c:408)
siw_proc_mpareq (drivers/infiniband/sw/siw/siw_cm.c:750)
siw_cm_work_handler (drivers/infiniband/sw/siw/siw_cm.c:1086)
The buggy address is located 0 bytes to the right of
allocated 6-byte region [ff1100010459d360, ff1100010459d366) |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: reject mdsmaps that claim more than CEPH_MAX_MDS ranks
check_new_map() sizes its export-target bitmap from CEPH_MAX_MDS but walks
it with newmap->possible_max_rank, which comes straight off the wire:
ceph_mdsmap_decode() sets it to max(m_num_active_mds, m_max_mds), then
overwrites it with the size of the "in" set. Neither is bounded by
CEPH_MAX_MDS, only by m_info allocating, so a monitor announcing more ranks
than the bitmap holds makes test_bit() read past the end of targets[]. The
clear_bit() loop above indexes the same bitmap, though it is additionally
bounded by mdsc->max_sessions. The map arrives on the monitor connection,
which is unauthenticated in legacy msgr mode.
CEPH_MAX_MDS is a protocol constant from src/mds/mdstypes.h, and the
reserved inode ranges in super.h are laid out one rank apart over that
span, so a map claiming more ranks is corrupt. Reject it where the rank
space is established rather than letting the count reach check_new_map().
BUG: KASAN: stack-out-of-bounds in check_new_map (fs/ceph/mds_client.c:5968)
Read of size 8 at addr ffffc90000ac7798 by task kworker/1:2/127
Workqueue: ceph-msgr ceph_con_workfn
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
kasan_check_range (mm/kasan/generic.c:186 mm/kasan/generic.c:200)
check_new_map (fs/ceph/mds_client.c:5968)
ceph_mdsc_handle_mdsmap (fs/ceph/mds_client.c:7060)
extra_mon_dispatch (fs/ceph/super.c:802)
mon_dispatch (net/ceph/mon_client.c:1483)
ceph_con_process_message (net/ceph/messenger.c:1424)
ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430)
ceph_con_workfn (net/ceph/messenger.c:1576)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
</TASK>
The buggy address belongs to stack of task kworker/1:2/127
and is located at offset 288 in frame:
check_new_map (fs/ceph/mds_client.c:5846)
This frame has 1 object:
[32, 288) 'targets' |
| Tight JPEG decoding in TightVNC and UltraVNC viewers contains a heap-based buffer overflow because an attacker-controlled framebuffer rectangle width is not validated against a fixed-size decoding buffer. A malicious VNC server can cause an out-of-bounds heap write when a user connects, resulting in application crash and potentially other memory-corruption impacts. |
| A vulnerability was determined in D-Link DIR-878 1.20B05. This impacts the function SetVLANSettings of the file prog.cgi of the component HNAP Handler. Executing a manipulation of the argument VID can lead to stack-based buffer overflow. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. This vulnerability only affects products that are no longer supported by the maintainer. |
| A vulnerability was found in D-Link DIR-878 1.20B05. This affects the function GetCAPTCHAsetting of the file bin/prog.cgi of the component HNAP Handler. Performing a manipulation of the argument uid results in heap-based buffer overflow. The attack can be initiated remotely. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer. |