Export limit exceeded: 426490 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (341 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-107493 | 1 Openssl | 1 Openssl | 2026-11-17 | N/A |
| Issue summary: When an application passes a stack to PEM_X509_INFO_read_bio_ex() to add entries to, and reading fails, OpenSSL frees every entry in the stack, both the old ones and any new ones, but leaves them in the stack. Impact summary: An application that passes an existing stack to PEM_X509_INFO_read_bio_ex() and keeps using it after a failed read may use memory that was already freed. This can cause a crash or, in principle, memory corruption. Malformed PEM data can make the read fail, but only applications that pass an existing stack are affected, and OpenSSL itself does not do this. CWE: CWE-416: Use After Free Description: PEM_X509_INFO_read_bio_ex() reads certificates, CRLs and private keys from PEM data and adds them to a stack of X509_INFO structures. If the application passes a stack that is not NULL, the function adds the new entries to it and must leave the entries that are already there unchanged. If reading fails, the function frees every entry in the stack. This includes the entries that were there before the call, and the entries added by the call. It does not remove these entries from the stack, so the stack keeps pointers to freed memory. The failure can happen at any point, even before any entry was added. A PEM item with invalid content is enough. This also happens if the stack was empty: entries added before the failure are freed but stay in the stack. An application that then reads or frees the stack will use memory that was already freed. This can crash the application or, in principle, corrupt memory. Only applications that pass a stack that is not NULL are affected. OpenSSL itself never does this. Its own callers, including the code that TLS uses to load CA certificates, always pass NULL. When the stack is NULL, the function frees only the entries that it created itself, which is safe. We expect that very few applications pass an existing stack. An attacker can make the read fail with malformed PEM data, but cannot make an application pass an existing stack. The same problem affects PEM_X509_INFO_read_bio(), PEM_X509_INFO_read() and PEM_X509_INFO_read_ex(), which use the same code. OpenSSL 1.1.1 and 1.0.2 have only the first two of these functions. FIPS impact: no The affected code is outside the FIPS module boundary. | ||||
| CVE-2026-124709 | 1 Openssl | 1 Openssl | 2026-11-17 | N/A |
| Issue summary: A QUIC server that rejects a stream opened by the peer may retain that stream's state for the lifetime of the connection if the peer resets the stream before the rejection is signalled, even though the peer's stream credit is returned. Impact summary: A remote client that completes a QUIC handshake can repeatedly open and reset streams, causing server memory to grow without bound until the process runs out of memory and every connection on it is lost. This is a Denial of Service. CWE: CWE-401: Missing Release of Memory after Effective Lifetime Description: QUIC servers track each stream the peer opens. When the incoming stream policy rejects a stream, OpenSSL schedules a STOP_SENDING frame, marks the stream deleted and returns the peer's stream credit. A deleted stream is collected only once its receive part is fully drained, which for a rejected stream means the STOP_SENDING has been acknowledged. If the peer sends RESET_STREAM first, the reset cancels the pending STOP_SENDING, so it is never sent or acknowledged and the stream is never collected. The default configuration reaches this path. Once a connection has a default stream, meaning the application has read from or written to the connection as the tutorial server does, the effective incoming stream policy rejects streams the application does not accept. Applications that set the REJECT policy explicitly are affected too. Each retained stream costs about 300 bytes, and the peer's stream credit window paces how quickly they accumulate. A client that keeps the connection open and keeps opening and resetting streams grows server memory without bound. The severity is Low because growth is slow, needs a long-lived connection, and causes no memory corruption or disclosure. FIPS impact: no The affected code is outside the FIPS module boundary. | ||||
| CVE-2026-35190 | 1 Openssl | 1 Openssl | 2026-11-17 | N/A |
| Issue summary: A server configured with the Suite B certificate flag through SSL_CTX_set_cert_flags() and with TLS 1.3 enabled may read past the end of a fixed group list when it processes a ClientHello whose supported_groups and key_share contain no Suite B group. Impact summary: A remote client can send a ClientHello that makes the server read past the end of a static array. The values read are never returned to the client, so no memory is disclosed; on builds with sanitizers or hardened allocators the read may crash the process, causing Denial of Service. CWE: CWE-125: Out-of-bounds Read Description: When the Suite B certificate flag is set, OpenSSL restricts the accepted groups to P-256 and P-384 by substituting a fixed two-element list for the configured group list. The tuple machinery used for key-share selection was not updated for this substitution: tls1_get_group_tuples() still returns the configured tuples, which by default describe eight groups. The server-side walk in tls_parse_ctos_key_share() then advances through the two-element list using those tuple counts without checking the cumulative offset against the number of groups present. Only applications that call SSL_CTX_set_cert_flags() with SSL_CERT_FLAG_SUITEB_128_LOS and leave TLS 1.3 enabled are affected. The openssl s_server -suiteB_128 option sets an X.509 verification parameter instead, so the stock command line server is not vulnerable. Default configurations do not reach this code. A client that offers only groups outside the Suite B set, such as X25519, forces every tuple to be walked and the read to run past the array. The bytes read are compared against client group IDs and never sent back, so no memory is disclosed. On builds with address sanitizers or hardened allocators the read can abort the process; in ordinary release builds it reads a few bytes of adjacent constant data. FIPS impact: no The affected code is outside the FIPS module boundary. | ||||
| CVE-2026-88822 | 1 Openssl | 1 Openssl | 2026-11-16 | 6.5 Medium |
| Issue summary: QUIC, when performing automated peer detection, may allow uninitialized stack data to leak into the received address which is then used as the destination for outgoing packets. Impact summary: Applications using QUIC's automated peer detection mechanism may receive an invalid address, leading to connection loss and disclosure of uninitialized stack data to an attacker observing the outgoing network traffic. CWE: CWE-457 (Use of Uninitialized Variable) Description: The OpenSSL QUIC stack contains a feature in which, when using an already connected socket, it will auto-detect the peer address during the SSL handshake. This feature uses the getpeername() function, passing a buffer of sufficient length to hold any supported address family, but passes a buffer length that is only sized such that larger addresses, such as IPv6, cannot be retrieved. The getpeername() function however, still returns the full address length, which is accepted as the valid input buffer length, leading to the address buffer containing uninitialized stack data instead of the actual peer address. The invalid peer address is then used as destination for the outgoing packets which leads to a connectivity breakage and a leakage of the uninitialized stack data to passive network observers. FIPS impact: no The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by this CVE as the affected protocol is not implemented in the FIPS module. | ||||
| CVE-2026-88823 | 1 Openssl | 1 Openssl | 2026-11-16 | 7.5 High |
| Issue summary: The AES-GCM-SIV implementation treats a zero-length Additional Authenticated Data (AAD) update as a reset of all the AAD supplied so far, instead of leaving the AAD unchanged. An application that supplies its AAD in several fragments, one of which is empty, therefore produces or verifies messages whose authentication tag does not cover the AAD supplied before the empty fragment. Impact summary: Data an application intended to authenticate alongside a message is silently left unauthenticated. An attacker can forge the AAD of such a message. CWE: CWE-325: Missing Cryptographic Step Description: An application passing AAD in multiple chunks of which some have zero length will have the previous AAD chunks effectively unauthenticated. Also, on context re-initialisation, the AAD was not reset, which meant that any AAD accumulated from the previous context usage were also included in the AAD of the new message. The fix makes a zero-length AAD update a no-op and clears any accumulated AAD whenever the context is re-initialised with a key or a nonce. A re-initialisation that only changes parameters keeps the AAD. FIPS impact: no The FIPS modules are not affected, as AES-GCM-SIV is not a FIPS approved algorithm and is implemented only in the default provider, outside the OpenSSL FIPS module boundary. | ||||
| CVE-2026-95691 | 1 Openssl | 1 Openssl | 2026-11-16 | 8.1 High |
| Issue summary: A retransmitted QUIC CRYPTO frame can release packet storage while the TLS record layer retains a direct pointer into that storage causing use after free. Impact summary: A malicious QUIC server can cause a heap-use-after-free read in the OpenSSL QUIC client. The server can also identify one allocator-adjacent byte through the client's protected Handshake response. CWE: CWE-416: Use After Free Description: During CRYPTO stream processing, a pointer into the first frame's memory on the stream is lent to the TLS handshake processing. The memory must remain stable until it is processed and released. However the processing of retransmitted CRYPTO frames could release the memory if the retransmitted frame fully overlapped the existing frame. This then causes use-after-free read when the TLS handshake processing continues. The use-after-free read can lead to a Denial-of-Service of the client application or a minor leak of information about the heap memory contents that might be overwritten with other data, subsequently allocated by the application, to the peer. FIPS impact: no The FIPS module is not affected as the QUIC implementation is outside of the OpenSSL FIPS module boundary. | ||||
| CVE-2026-107496 | 1 Openssl | 1 Openssl | 2026-11-16 | 7.5 High |
| Issue summary: Encrypting a CMS message to an EC certificate whose group order is 1 may cause CMS_encrypt() or CMS_encrypt_ex() to loop indefinitely. Impact summary: An attacker able to supply the recipient certificate to an application performing CMS encryption can cause that application to loop indefinitely, consuming CPU and resulting in Denial of Service. CWE: CWE-835: Loop with Unreachable Exit Condition ('Infinite Loop') Description: CMS_encrypt() and CMS_encrypt_ex() encrypt a message to one or more recipient certificates and, for an EC recipient, generate an ephemeral key in the recipient's group. If the certificate declares a group order of 1, random scalar generation can only produce zero. The key generation routine then retries without limit while waiting for a nonzero private scalar, so the call never returns. The OpenSSL TLS and QUIC implementations do not use this path. An application is exposed only if it calls CMS_encrypt() or CMS_encrypt_ex() with a recipient certificate whose EC parameters are attacker-controlled. Certificates with normal EC group orders do not trigger the loop. OpenSSL 4.0 and later reject unknown explicit EC groups in default builds. These versions are affected only when configured with the enable-ec_explicit_curves option. The result is a hang that consumes a CPU core until the process is interrupted, a Denial of Service. The severity is Low because the attacker must supply the recipient certificate and the application must choose to encrypt to it; ordinary CMS encryption to trusted recipients is unaffected. The fix makes EC key generation fail when the group has no valid nonzero private scalar, instead of retrying indefinitely. FIPS impact: no The FIPS modules in 4.1, 4.0, 3.5 and 3.0 are not affected. The FIPS provider does not support arbitrary explicit EC domain parameters, so an order-1 group is rejected during key import before the vulnerable key generation path is reached. | ||||
| CVE-2026-95692 | 1 Openssl | 1 Openssl | 2026-11-16 | 7.5 High |
| Issue summary: Setting an AES-GCM-SIV IV shorter than the expected nonce length via EVP_CipherInit_ex() may trigger a heap out-of-bounds read. Supplying a longer IV is silently truncated instead of rejected. Impact summary: An application passing a caller-supplied IV of the wrong length may crash or read beyond its buffer. Because trailing IV bytes are ignored, an attacker who knows one message and tag may forge messages under a different IV. CWE: CWE-125: Out-of-bounds Read Description: AES-GCM-SIV copies the caller-supplied IV or nonce into its internal state using a copy whose length is taken from the expected nonce size rather than from the length the caller actually provided. When the caller passes a shorter IV, the copy reads past the end of the caller's buffer; AddressSanitizer confirms a heap out-of-bounds read reached through EVP_CipherInit_ex() into ossl_aes_gcm_siv_init(). When the caller passes a longer IV, the implementation silently discards the trailing bytes instead of rejecting the length. The truncation breaks the binding between the IV and the computed authentication tag. An attacker who has observed a message and its tag under one IV can produce a message and tag that verify under a different IV whose first bytes match, since the surplus bytes never influence the computation. The message itself is unchanged, so this is a failure of IV commitment rather than a classic existential forgery. Only applications that call EVP_CipherInit_ex() (or the equivalent provider cipher initialization) with an IV length other than the standard 12 bytes for AES-GCM-SIV are affected. The severity is limited because the out-of-bounds read is small and attacker-controlled only in length, and the forgery requires an unusual IV length choice by the application. FIPS impact: no The FIPS modules are not affected by this issue, as AES-GCM-SIV is not an approved algorithm. | ||||
| CVE-2024-5535 | 5 Debian, Netapp, Openssl and 2 more | 72 Debian Linux, 500f, 500f Firmware and 69 more | 2026-11-10 | 9.1 Critical |
| Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an empty supported client protocols buffer may cause a crash or memory contents to be sent to the peer. Impact summary: A buffer overread can have a range of potential consequences such as unexpected application beahviour or a crash. In particular this issue could result in up to 255 bytes of arbitrary private data from memory being sent to the peer leading to a loss of confidentiality. However, only applications that directly call the SSL_select_next_proto function with a 0 length list of supported client protocols are affected by this issue. This would normally never be a valid scenario and is typically not under attacker control but may occur by accident in the case of a configuration or programming error in the calling application. The OpenSSL API function SSL_select_next_proto is typically used by TLS applications that support ALPN (Application Layer Protocol Negotiation) or NPN (Next Protocol Negotiation). NPN is older, was never standardised and is deprecated in favour of ALPN. We believe that ALPN is significantly more widely deployed than NPN. The SSL_select_next_proto function accepts a list of protocols from the server and a list of protocols from the client and returns the first protocol that appears in the server list that also appears in the client list. In the case of no overlap between the two lists it returns the first item in the client list. In either case it will signal whether an overlap between the two lists was found. In the case where SSL_select_next_proto is called with a zero length client list it fails to notice this condition and returns the memory immediately following the client list pointer (and reports that there was no overlap in the lists). This function is typically called from a server side application callback for ALPN or a client side application callback for NPN. In the case of ALPN the list of protocols supplied by the client is guaranteed by libssl to never be zero in length. The list of server protocols comes from the application and should never normally be expected to be of zero length. In this case if the SSL_select_next_proto function has been called as expected (with the list supplied by the client passed in the client/client_len parameters), then the application will not be vulnerable to this issue. If the application has accidentally been configured with a zero length server list, and has accidentally passed that zero length server list in the client/client_len parameters, and has additionally failed to correctly handle a "no overlap" response (which would normally result in a handshake failure in ALPN) then it will be vulnerable to this problem. In the case of NPN, the protocol permits the client to opportunistically select a protocol when there is no overlap. OpenSSL returns the first client protocol in the no overlap case in support of this. The list of client protocols comes from the application and should never normally be expected to be of zero length. However if the SSL_select_next_proto function is accidentally called with a client_len of 0 then an invalid memory pointer will be returned instead. If the application uses this output as the opportunistic protocol then the loss of confidentiality will occur. This issue has been assessed as Low severity because applications are most likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not widely used. It also requires an application configuration or programming error. Finally, this issue would not typically be under attacker control making active exploitation unlikely. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. Due to the low severity of this issue we are not issuing new releases of OpenSSL at this time. The fix will be included in the next releases when they become available. | ||||
| CVE-2023-6237 | 4 Netapp, Openssl, Redhat and 1 more | 59 500f, 500f Firmware, 8300 and 56 more | 2026-11-10 | 5.9 Medium |
| Issue summary: Checking excessively long invalid RSA public keys may take a long time. Impact summary: Applications that use the function EVP_PKEY_public_check() to check RSA public keys may experience long delays. Where the key that is being checked has been obtained from an untrusted source this may lead to a Denial of Service. When function EVP_PKEY_public_check() is called on RSA public keys, a computation is done to confirm that the RSA modulus, n, is composite. For valid RSA keys, n is a product of two or more large primes and this computation completes quickly. However, if n is an overly large prime, then this computation would take a long time. An application that calls EVP_PKEY_public_check() and supplies an RSA key obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function EVP_PKEY_public_check() is not called from other OpenSSL functions however it is called from the OpenSSL pkey command line application. For that reason that application is also vulnerable if used with the '-pubin' and '-check' options on untrusted data. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue. | ||||
| CVE-2026-84782 | 2 Openssl, Redhat | 2 Openssl, Hummingbird | 2026-11-10 | 8.2 High |
| Issue summary: The DTLS retransmission logic does not correctly handle a handshake message write that is suspended part-way through. The retransmitted message can be read past the message buffer and the retransmission overwrites the internal state the suspended write needs to resume correctly. Impact summary: The retransmitted message can disclose a heap memory to the peer as plaintext handshake data or cause a crash and a Denial of Service when the read reaches an unmapped memory region. CWE: CWE-125: Out-of-bounds Read Description: DTLS handshake messages can be written out in multiple fragments, and a write can suspend mid-message (returning WANT_WRITE) if the underlying transport temporarily cannot accept more data. While such a write is suspended, the DTLS retransmission timer may independently fire and ask the retransmission logic to resend an earlier, already-acknowledged-as-sent message from its retransmit queue. The retransmission logic reused the same internal buffer and position tracking as the message that was still being written, without resetting the position back to the start of the message being retransmitted. As a result the retransmission was read starting from wherever the suspended write had left off, producing a mislabelled message whose body was leftover bytes from the other, larger message still in flight - content that was never meant to be sent at that point, and which could run past the end of the allocated buffer. Separately, even when the retransmission is positioned correctly, allowing it to run to completion while another write is suspended overwrites the same shared bookkeeping that the suspended write depends on to resume. When the application later resumes the suspended write (via a subsequent SSL_read(), SSL_write(), SSL_accept(), or SSL_connect() call), it finds that bookkeeping in a state inconsistent with the message and aborts the process in a debugging build. The fix resets the retransmission's read position to the start of the message before resending, and skips retransmission entirely whenever a handshake write is still suspended, deferring to the next call that resumes it instead. FIPS impact: no The affected code is outside the FIPS module boundary. | ||||
| CVE-2026-77696 | 1 Openssl | 1 Openssl | 2026-11-10 | 3.7 Low |
| Issue summary: SM2 signature generation uses non-constant-time arithmetic on secret values, forming a timing side-channel. Impact summary: An attacker able to measure SM2 signing times may learn information about the per-signature secret nonce, which over many signatures can, via a lattice / Hidden Number Problem attack, lead to recovery of the private key. CWE: CWE-208: Observable Timing Discrepancy Description: SM2 signature generation computes the signature value using variable-time BIGNUM operations on the secret nonce and the private key, so the time taken to produce an SM2 signature depends on these secret values, forming a timing side-channel. Applications performing SM2 signature generation are affected on all platforms. FIPS Impact: no SM2 is not a FIPS algorithm. | ||||
| CVE-2026-75806 | 1 Openssl | 1 Openssl | 2026-11-10 | 5.3 Medium |
| Issue summary: An established DTLS 1.2 association using an AEAD cipher suite can be terminated by a single unauthenticated datagram whose encrypted fragment is shorter than the mandatory explicit IV and authentication tag overhead. Impact summary: An attacker who can send a datagram that is routed to an existing DTLS 1.2 association can tear that association down without knowing any key material. This is a Denial of Service limited to the targeted association. There is no memory safety or confidentiality impact. CWE: CWE-1284: Improper Validation of Specified Quantity in Input Description: In TLS 1.2 and DTLS 1.2 every record protected by an AEAD cipher suite carries an explicit IV followed by the ciphertext and an authentication tag. When decrypting such a record the record layer passed the record length to the cipher implementation before checking that the record was long enough to contain the explicit IV and the tag. For a record shorter than that overhead the cipher implementation rejected the impossible length, and the record layer treated this as an internal failure and raised a fatal internal_error alert instead of treating the record as one that failed authentication. In TLS 1.2 the same record causes a fatal internal_error alert instead of the expected bad_record_mac alert. Since any undecryptable record already terminates a TLS connection, this is a protocol conformance issue rather than a security issue in TLS. The fix validates the record length against the explicit IV and tag length before any AEAD processing, so that TLS reports bad_record_mac and DTLS silently discards the record. FIPS impact: no The affected code is outside the FIPS module boundary. | ||||
| CVE-2026-75805 | 1 Openssl | 1 Openssl | 2026-11-10 | 5.3 Medium |
| Issue summary: A CMP client that requests certificate revocation on the basis of a PKCS#10 CSR may dereference a NULL pointer and terminate abnormally when processing a crafted revocation response. Impact summary: The NULL pointer dereference happens on a read which leads to a crash and a Denial of Service for the affected client application. CWE: CWE-476: NULL-pointer dereference Description: A CMP client revoking a certificate has to tell the server which certificate to revoke, and may do so by supplying a PKCS#10 CSR instead of the certificate itself or its issuer name and serial number. This is 'openssl cmp -cmd rr -csr <file>' on the command line, or OSSL_CMP_exec_RR_ses() with the certificate supplied via OSSL_CMP_CTX_set1_p10CSR() through the API. A CSR does not contain the issuer name and serial number of the certificate, so the client does not send them. A server may optionally name the certificate it revoked in its response, and the client then compares that name against what it sent. Having sent neither an issuer name nor a serial number, it has nothing to compare against, and a server returning a specially crafted name causes the client to read from a NULL pointer and crash. The revocation response is checked for valid message protection before the affected code is reached, so an attacker must be a malicious or compromised CMP server, or a man-in-the-middle in possession of the secret used for message protection. Clients that identify the certificate to be revoked by a certificate or by issuer and serial number rather than by a PKCS#10 CSR are not affected. FIPS impact: no No FIPS modules are affected by this issue, as the CMP protocol implementation is outside the OpenSSL FIPS module boundary. | ||||
| CVE-2026-54872 | 1 Openssl | 1 Openssl | 2026-11-10 | 3.7 Low |
| Issue summary: The generic elliptic-curve scalar multiplication used for ECDSA and SM2 signature operations with curves that do not have a dedicated implementation leaks information about the secret nonce through timing. Impact summary: An attacker able to measure signing times may learn information about the per-signature secret nonce, which over many signatures can, via a lattice / Hidden Number Problem attack, lead to recovery of the private key. CWE: CWE-208: Observable Timing Discrepancy Description: The generic elliptic-curve scalar multiplication used for curves that do not have a dedicated constant-time implementation pads the secret scalar with non-constant-time BIGNUM operations, so the time taken depends on the value of the secret scalar derived from the ECDSA and SM2 nonce. The leak is very small; observing it requires a large number of measurements. The effect is largest for curves whose group order lies on a machine-word boundary, such as brainpoolP384r1. Applications using ECDSA signing over the Brainpool and other generic prime curves, and SM2 signing on platforms that use the generic implementation, are vulnerable to this issue. The NIST curves P-256, P-384 and P-521 use dedicated constant-time implementations and are not affected. FIPS Impact: no The FIPS modules are not affected: the approved NIST curves used in the FIPS provider have dedicated constant-time implementations and do not use the affected code path. | ||||
| CVE-2026-35189 | 1 Openssl | 1 Openssl | 2026-11-10 | 5.3 Medium |
| Issue summary: A certificate with many nameRelativeToCRLIssuer CRL distribution points causes disproportionate heap growth when OpenSSL caches X.509 extensions. Impact summary: Receiving a crafted certificate from a malicious peer can lead to significant memory pressure and possible Denial of Service in clients or in servers that solicit client certificates. CWE: CWE-770: Allocation of Resources Without Limits or Throttling Description: A certificate or a set of certificates that fits under the limit for size of certificates accepted from the peer (~100 KiB) can result in allocation of several hundred MiB of resident memory on the receiving side during a normal TLS handshake. This may be enough to crash the client or server, if multiple concurrent connections lead to similarly large memory allocations. The fix postpones processing of the CRL distribution points extensions in certificates to the time when the processed value is required for CRL processing. This avoids keeping large memory allocations for a long time when such certificates are received. FIPS impact: no The affected code is outside the FIPS module boundary. | ||||
| CVE-2025-15467 | 1 Openssl | 1 Openssl | 2026-11-10 | 8.8 High |
| Issue summary: Parsing CMS AuthEnvelopedData or EnvelopedData message with maliciously crafted AEAD parameters can trigger a stack buffer overflow. Impact summary: A stack buffer overflow may lead to a crash, causing Denial of Service, or potentially remote code execution. When parsing CMS (Auth)EnvelopedData structures that use AEAD ciphers such as AES-GCM, the IV (Initialization Vector) encoded in the ASN.1 parameters is copied into a fixed-size stack buffer without verifying that its length fits the destination. An attacker can supply a crafted CMS message with an oversized IV, causing a stack-based out-of-bounds write before any authentication or tag verification occurs. Applications and services that parse untrusted CMS or PKCS#7 content using AEAD ciphers (e.g., S/MIME (Auth)EnvelopedData with AES-GCM) are vulnerable. Because the overflow occurs prior to authentication, no valid key material is required to trigger it. While exploitability to remote code execution depends on platform and toolchain mitigations, the stack-based write primitive represents a severe risk. The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the CMS implementation is outside the OpenSSL FIPS module boundary. OpenSSL 3.6, 3.5, 3.4, 3.3 and 3.0 are vulnerable to this issue. OpenSSL 1.1.1 and 1.0.2 are not affected by this issue. | ||||
| CVE-2025-9232 | 2 Openssl, Siemens | 42 Openssl, Ruggedcom Rst2428p, Ruggedcom Rst2428p Firmware and 39 more | 2026-11-09 | 5.9 Medium |
| Issue summary: An application using the OpenSSL HTTP client API functions may trigger an out-of-bounds read if the 'no_proxy' environment variable is set and the host portion of the authority component of the HTTP URL is an IPv6 address. Impact summary: An out-of-bounds read can trigger a crash which leads to Denial of Service for an application. The OpenSSL HTTP client API functions can be used directly by applications but they are also used by the OCSP client functions and CMP (Certificate Management Protocol) client implementation in OpenSSL. However the URLs used by these implementations are unlikely to be controlled by an attacker. In this vulnerable code the out of bounds read can only trigger a crash. Furthermore the vulnerability requires an attacker-controlled URL to be passed from an application to the OpenSSL function and the user has to have a 'no_proxy' environment variable set. For the aforementioned reasons the issue was assessed as Low severity. The vulnerable code was introduced in the following patch releases: 3.0.16, 3.1.8, 3.2.4, 3.3.3, 3.4.0 and 3.5.0. The FIPS modules in 3.5, 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected by this issue, as the HTTP client implementation is outside the OpenSSL FIPS module boundary. | ||||
| CVE-2025-9230 | 3 Debian, Openssl, Siemens | 40 Debian Linux, Openssl, Ruggedcom Rst2428p and 37 more | 2026-11-09 | 9.8 Critical |
| Issue summary: An application trying to decrypt CMS messages encrypted using password based encryption can trigger an out-of-bounds read and write. Impact summary: This out-of-bounds read may trigger a crash which leads to Denial of Service for an application. The out-of-bounds write can cause a memory corruption which can have various consequences including a Denial of Service or Execution of attacker-supplied code. Although the consequences of a successful exploit of this vulnerability could be severe, the probability that the attacker would be able to perform it is low. Besides, password based (PWRI) encryption support in CMS messages is very rarely used. For that reason the issue was assessed as Moderate severity according to our Security Policy. The FIPS modules in 3.5, 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected by this issue, as the CMS implementation is outside the OpenSSL FIPS module boundary. | ||||
| CVE-2025-9231 | 2 Openssl, Siemens | 35 Openssl, Ruggedcom Rst2428p, Ruggedcom Rst2428p Firmware and 32 more | 2026-11-09 | 5.9 Medium |
| Issue summary: A timing side-channel which could potentially allow remote recovery of the private key exists in the SM2 algorithm implementation on 64 bit ARM platforms. Impact summary: A timing side-channel in SM2 signature computations on 64 bit ARM platforms could allow recovering the private key by an attacker.. While remote key recovery over a network was not attempted by the reporter, timing measurements revealed a timing signal which may allow such an attack. OpenSSL does not directly support certificates with SM2 keys in TLS, and so this CVE is not relevant in most TLS contexts. However, given that it is possible to add support for such certificates via a custom provider, coupled with the fact that in such a custom provider context the private key may be recoverable via remote timing measurements, we consider this to be a Moderate severity issue. The FIPS modules in 3.5, 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected by this issue, as SM2 is not an approved algorithm. | ||||