Export limit exceeded: 430483 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26769 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40224 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (cgbc-hwmon) Add missing NULL check after devm_kzalloc() The driver allocates memory for sensor data using devm_kzalloc(), but did not check if the allocation succeeded. In case of memory allocation failure, dereferencing the NULL pointer would lead to a kernel crash. Add a NULL pointer check and return -ENOMEM to handle allocation failure properly. | ||||
| CVE-2025-40223 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: most: usb: Fix use-after-free in hdm_disconnect hdm_disconnect() calls most_deregister_interface(), which eventually unregisters the MOST interface device with device_unregister(iface->dev). If that drops the last reference, the device core may call release_mdev() immediately while hdm_disconnect() is still executing. The old code also freed several mdev-owned allocations in hdm_disconnect() and then performed additional put_device() calls. Depending on refcount order, this could lead to use-after-free or double-free when release_mdev() ran (or when unregister paths also performed puts). Fix by moving the frees of mdev-owned allocations into release_mdev(), so they happen exactly once when the device is truly released, and by dropping the extra put_device() calls in hdm_disconnect() that are redundant after device_unregister() and most_deregister_interface(). This addresses the KASAN slab-use-after-free reported by syzbot in hdm_disconnect(). See report and stack traces in the bug link below. | ||||
| CVE-2025-40217 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: pidfs: validate extensible ioctls Validate extensible ioctls stricter than we do now. | ||||
| CVE-2025-40208 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: iris: fix module removal if firmware download failed Fix remove if firmware failed to load: qcom-iris aa00000.video-codec: Direct firmware load for qcom/vpu/vpu33_p4.mbn failed with error -2 qcom-iris aa00000.video-codec: firmware download failed qcom-iris aa00000.video-codec: core init failed then: $ echo aa00000.video-codec > /sys/bus/platform/drivers/qcom-iris/unbind Triggers: genpd genpd:1:aa00000.video-codec: Runtime PM usage count underflow! ------------[ cut here ]------------ video_cc_mvs0_clk already disabled WARNING: drivers/clk/clk.c:1206 at clk_core_disable+0xa4/0xac, CPU#1: sh/542 <snip> pc : clk_core_disable+0xa4/0xac lr : clk_core_disable+0xa4/0xac <snip> Call trace: clk_core_disable+0xa4/0xac (P) clk_disable+0x30/0x4c iris_disable_unprepare_clock+0x20/0x48 [qcom_iris] iris_vpu_power_off_hw+0x48/0x58 [qcom_iris] iris_vpu33_power_off_hardware+0x44/0x230 [qcom_iris] iris_vpu_power_off+0x34/0x84 [qcom_iris] iris_core_deinit+0x44/0xc8 [qcom_iris] iris_remove+0x20/0x48 [qcom_iris] platform_remove+0x20/0x30 device_remove+0x4c/0x80 <snip> ---[ end trace 0000000000000000 ]--- ------------[ cut here ]------------ video_cc_mvs0_clk already unprepared WARNING: drivers/clk/clk.c:1065 at clk_core_unprepare+0xf0/0x110, CPU#2: sh/542 <snip> pc : clk_core_unprepare+0xf0/0x110 lr : clk_core_unprepare+0xf0/0x110 <snip> Call trace: clk_core_unprepare+0xf0/0x110 (P) clk_unprepare+0x2c/0x44 iris_disable_unprepare_clock+0x28/0x48 [qcom_iris] iris_vpu_power_off_hw+0x48/0x58 [qcom_iris] iris_vpu33_power_off_hardware+0x44/0x230 [qcom_iris] iris_vpu_power_off+0x34/0x84 [qcom_iris] iris_core_deinit+0x44/0xc8 [qcom_iris] iris_remove+0x20/0x48 [qcom_iris] platform_remove+0x20/0x30 device_remove+0x4c/0x80 <snip> ---[ end trace 0000000000000000 ]--- genpd genpd:0:aa00000.video-codec: Runtime PM usage count underflow! ------------[ cut here ]------------ gcc_video_axi0_clk already disabled WARNING: drivers/clk/clk.c:1206 at clk_core_disable+0xa4/0xac, CPU#4: sh/542 <snip> pc : clk_core_disable+0xa4/0xac lr : clk_core_disable+0xa4/0xac <snip> Call trace: clk_core_disable+0xa4/0xac (P) clk_disable+0x30/0x4c iris_disable_unprepare_clock+0x20/0x48 [qcom_iris] iris_vpu33_power_off_controller+0x17c/0x428 [qcom_iris] iris_vpu_power_off+0x48/0x84 [qcom_iris] iris_core_deinit+0x44/0xc8 [qcom_iris] iris_remove+0x20/0x48 [qcom_iris] platform_remove+0x20/0x30 device_remove+0x4c/0x80 <snip> ------------[ cut here ]------------ gcc_video_axi0_clk already unprepared WARNING: drivers/clk/clk.c:1065 at clk_core_unprepare+0xf0/0x110, CPU#4: sh/542 <snip> pc : clk_core_unprepare+0xf0/0x110 lr : clk_core_unprepare+0xf0/0x110 <snip> Call trace: clk_core_unprepare+0xf0/0x110 (P) clk_unprepare+0x2c/0x44 iris_disable_unprepare_clock+0x28/0x48 [qcom_iris] iris_vpu33_power_off_controller+0x17c/0x428 [qcom_iris] iris_vpu_power_off+0x48/0x84 [qcom_iris] iris_core_deinit+0x44/0xc8 [qcom_iris] iris_remove+0x20/0x48 [qcom_iris] platform_remove+0x20/0x30 device_remove+0x4c/0x80 <snip> ---[ end trace 0000000000000000 ]--- Skip deinit if initialization never succeeded. | ||||
| CVE-2025-40207 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: v4l2-subdev: Fix alloc failure check in v4l2_subdev_call_state_try() v4l2_subdev_call_state_try() macro allocates a subdev state with __v4l2_subdev_state_alloc(), but does not check the returned value. If __v4l2_subdev_state_alloc fails, it returns an ERR_PTR, and that would cause v4l2_subdev_call_state_try() to crash. Add proper error handling to v4l2_subdev_call_state_try(). | ||||
| CVE-2025-59691 | 2 Linux, Purevpn | 2 Linux, Purevpn | 2026-04-15 | 3.7 Low |
| PureVPN client applications on Linux through September 2025 allow IPv6 traffic to leak outside the VPN tunnel upon network events such as Wi-Fi reconnect or system resume. In the CLI client, the VPN auto-reconnects and claims to be connected, but IPv6 traffic is no longer routed or blocked. In the GUI client, the IPv6 connection remains functional after disconnection until the user clicks Reconnect. In both cases, the real IPv6 address is exposed to external services, violating user privacy and defeating the advertised IPv6 leak protection. This affects CLI 2.0.1 and GUI 2.10.0. | ||||
| CVE-2025-40192 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Revert "ipmi: fix msg stack when IPMI is disconnected" This reverts commit c608966f3f9c2dca596967501d00753282b395fc. This patch has a subtle bug that can cause the IPMI driver to go into an infinite loop if the BMC misbehaves in a certain way. Apparently certain BMCs do misbehave this way because several reports have come in recently about this. | ||||
| CVE-2025-40191 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix kfd process ref leaking when userptr unmapping kfd_lookup_process_by_pid hold the kfd process reference to ensure it doesn't get destroyed while sending the segfault event to user space. Calling kfd_lookup_process_by_pid as function parameter leaks the kfd process refcount and miss the NULL pointer check if app process is already destroyed. | ||||
| CVE-2025-59692 | 2 Linux, Purevpn | 2 Linux, Purevpn | 2026-04-15 | 3.7 Low |
| PureVPN client applications on Linux through September 2025 mishandle firewalling. They flush the system's existing iptables rules and apply default ACCEPT policies when connecting to a VPN server. This removes firewall rules that may have been configured manually or by other software (e.g., UFW, container engines, or system security policies). Upon VPN disconnect, the original firewall state is not restored. As a result, the system may become unintentionally exposed to network traffic that was previously blocked. This affects CLI 2.0.1 and GUI 2.10.0. | ||||
| CVE-2016-20022 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 8.4 High |
| In the Linux kernel before 4.8, usb_parse_endpoint in drivers/usb/core/config.c does not validate the wMaxPacketSize field of an endpoint descriptor. NOTE: This vulnerability only affects products that are no longer supported by the supplier. | ||||
| CVE-2023-54305 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: refuse to create ea block when umounted The ea block expansion need to access s_root while it is already set as NULL when umount is triggered. Refuse this request to avoid panic. | ||||
| CVE-2023-54304 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: meson_sm: fix to avoid potential NULL pointer dereference of_match_device() may fail and returns a NULL pointer. Fix this by checking the return value of of_match_device. | ||||
| CVE-2023-54302 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix data race on CQP completion stats CQP completion statistics is read lockesly in irdma_wait_event and irdma_check_cqp_progress while it can be updated in the completion thread irdma_sc_ccq_get_cqe_info on another CPU as KCSAN reports. Make completion statistics an atomic variable to reflect coherent updates to it. This will also avoid load/store tearing logic bug potentially possible by compiler optimizations. [77346.170861] BUG: KCSAN: data-race in irdma_handle_cqp_op [irdma] / irdma_sc_ccq_get_cqe_info [irdma] [77346.171383] write to 0xffff8a3250b108e0 of 8 bytes by task 9544 on cpu 4: [77346.171483] irdma_sc_ccq_get_cqe_info+0x27a/0x370 [irdma] [77346.171658] irdma_cqp_ce_handler+0x164/0x270 [irdma] [77346.171835] cqp_compl_worker+0x1b/0x20 [irdma] [77346.172009] process_one_work+0x4d1/0xa40 [77346.172024] worker_thread+0x319/0x700 [77346.172037] kthread+0x180/0x1b0 [77346.172054] ret_from_fork+0x22/0x30 [77346.172136] read to 0xffff8a3250b108e0 of 8 bytes by task 9838 on cpu 2: [77346.172234] irdma_handle_cqp_op+0xf4/0x4b0 [irdma] [77346.172413] irdma_cqp_aeq_cmd+0x75/0xa0 [irdma] [77346.172592] irdma_create_aeq+0x390/0x45a [irdma] [77346.172769] irdma_rt_init_hw.cold+0x212/0x85d [irdma] [77346.172944] irdma_probe+0x54f/0x620 [irdma] [77346.173122] auxiliary_bus_probe+0x66/0xa0 [77346.173137] really_probe+0x140/0x540 [77346.173154] __driver_probe_device+0xc7/0x220 [77346.173173] driver_probe_device+0x5f/0x140 [77346.173190] __driver_attach+0xf0/0x2c0 [77346.173208] bus_for_each_dev+0xa8/0xf0 [77346.173225] driver_attach+0x29/0x30 [77346.173240] bus_add_driver+0x29c/0x2f0 [77346.173255] driver_register+0x10f/0x1a0 [77346.173272] __auxiliary_driver_register+0xbc/0x140 [77346.173287] irdma_init_module+0x55/0x1000 [irdma] [77346.173460] do_one_initcall+0x7d/0x410 [77346.173475] do_init_module+0x81/0x2c0 [77346.173491] load_module+0x1232/0x12c0 [77346.173506] __do_sys_finit_module+0x101/0x180 [77346.173522] __x64_sys_finit_module+0x3c/0x50 [77346.173538] do_syscall_64+0x39/0x90 [77346.173553] entry_SYSCALL_64_after_hwframe+0x63/0xcd [77346.173634] value changed: 0x0000000000000094 -> 0x0000000000000095 | ||||
| CVE-2023-54295 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mtd: spi-nor: Fix shift-out-of-bounds in spi_nor_set_erase_type spi_nor_set_erase_type() was used either to set or to mask out an erase type. When we used it to mask out an erase type a shift-out-of-bounds was hit: UBSAN: shift-out-of-bounds in drivers/mtd/spi-nor/core.c:2237:24 shift exponent 4294967295 is too large for 32-bit type 'int' The setting of the size_{shift, mask} and of the opcode are unnecessary when the erase size is zero, as throughout the code just the erase size is considered to determine whether an erase type is supported or not. Setting the opcode to 0xFF was wrong too as nobody guarantees that 0xFF is an unused opcode. Thus when masking out an erase type, just set the erase size to zero. This will fix the shift-out-of-bounds. [ta: refine changes, new commit message, fix compilation error] | ||||
| CVE-2023-54294 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix memleak of md thread In raid10_run(), if setup_conf() succeed and raid10_run() failed before setting 'mddev->thread', then in the error path 'conf->thread' is not freed. Fix the problem by setting 'mddev->thread' right after setup_conf(). | ||||
| CVE-2023-54293 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bcache: fixup btree_cache_wait list damage We get a kernel crash about "list_add corruption. next->prev should be prev (ffff9c801bc01210), but was ffff9c77b688237c. (next=ffffae586d8afe68)." crash> struct list_head 0xffff9c801bc01210 struct list_head { next = 0xffffae586d8afe68, prev = 0xffffae586d8afe68 } crash> struct list_head 0xffff9c77b688237c struct list_head { next = 0x0, prev = 0x0 } crash> struct list_head 0xffffae586d8afe68 struct list_head struct: invalid kernel virtual address: ffffae586d8afe68 type: "gdb_readmem_callback" Cannot access memory at address 0xffffae586d8afe68 [230469.019492] Call Trace: [230469.032041] prepare_to_wait+0x8a/0xb0 [230469.044363] ? bch_btree_keys_free+0x6c/0xc0 [escache] [230469.056533] mca_cannibalize_lock+0x72/0x90 [escache] [230469.068788] mca_alloc+0x2ae/0x450 [escache] [230469.080790] bch_btree_node_get+0x136/0x2d0 [escache] [230469.092681] bch_btree_check_thread+0x1e1/0x260 [escache] [230469.104382] ? finish_wait+0x80/0x80 [230469.115884] ? bch_btree_check_recurse+0x1a0/0x1a0 [escache] [230469.127259] kthread+0x112/0x130 [230469.138448] ? kthread_flush_work_fn+0x10/0x10 [230469.149477] ret_from_fork+0x35/0x40 bch_btree_check_thread() and bch_dirty_init_thread() may call mca_cannibalize() to cannibalize other cached btree nodes. Only one thread can do it at a time, so the op of other threads will be added to the btree_cache_wait list. We must call finish_wait() to remove op from btree_cache_wait before free it's memory address. Otherwise, the list will be damaged. Also should call bch_cannibalize_unlock() to release the btree_cache_alloc_lock and wake_up other waiters. | ||||
| CVE-2023-54301 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: 8250_bcm7271: fix leak in `brcmuart_probe` Smatch reports: drivers/tty/serial/8250/8250_bcm7271.c:1120 brcmuart_probe() warn: 'baud_mux_clk' from clk_prepare_enable() not released on lines: 1032. The issue is fixed by using a managed clock. | ||||
| CVE-2023-54291 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vduse: fix NULL pointer dereference vduse_vdpa_set_vq_affinity callback can be called with NULL value as cpu_mask when deleting the vduse device. This patch resets virtqueue's IRQ affinity mask value to set all CPUs instead of dereferencing NULL cpu_mask. [ 4760.952149] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 4760.959110] #PF: supervisor read access in kernel mode [ 4760.964247] #PF: error_code(0x0000) - not-present page [ 4760.969385] PGD 0 P4D 0 [ 4760.971927] Oops: 0000 [#1] PREEMPT SMP PTI [ 4760.976112] CPU: 13 PID: 2346 Comm: vdpa Not tainted 6.4.0-rc6+ #4 [ 4760.982291] Hardware name: Dell Inc. PowerEdge R640/0W23H8, BIOS 2.8.1 06/26/2020 [ 4760.989769] RIP: 0010:memcpy_orig+0xc5/0x130 [ 4760.994049] Code: 16 f8 4c 89 07 4c 89 4f 08 4c 89 54 17 f0 4c 89 5c 17 f8 c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 83 fa 08 72 1b <4c> 8b 06 4c 8b 4c 16 f8 4c 89 07 4c 89 4c 17 f8 c3 cc cc cc cc 66 [ 4761.012793] RSP: 0018:ffffb1d565abb830 EFLAGS: 00010246 [ 4761.018020] RAX: ffff9f4bf6b27898 RBX: ffff9f4be23969c0 RCX: ffff9f4bcadf6400 [ 4761.025152] RDX: 0000000000000008 RSI: 0000000000000000 RDI: ffff9f4bf6b27898 [ 4761.032286] RBP: 0000000000000000 R08: 0000000000000008 R09: 0000000000000000 [ 4761.039416] R10: 0000000000000000 R11: 0000000000000600 R12: 0000000000000000 [ 4761.046549] R13: 0000000000000000 R14: 0000000000000080 R15: ffffb1d565abbb10 [ 4761.053680] FS: 00007f64c2ec2740(0000) GS:ffff9f635f980000(0000) knlGS:0000000000000000 [ 4761.061765] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4761.067513] CR2: 0000000000000000 CR3: 0000001875270006 CR4: 00000000007706e0 [ 4761.074645] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4761.081775] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 4761.088909] PKRU: 55555554 [ 4761.091620] Call Trace: [ 4761.094074] <TASK> [ 4761.096180] ? __die+0x1f/0x70 [ 4761.099238] ? page_fault_oops+0x171/0x4f0 [ 4761.103340] ? exc_page_fault+0x7b/0x180 [ 4761.107265] ? asm_exc_page_fault+0x22/0x30 [ 4761.111460] ? memcpy_orig+0xc5/0x130 [ 4761.115126] vduse_vdpa_set_vq_affinity+0x3e/0x50 [vduse] [ 4761.120533] virtnet_clean_affinity.part.0+0x3d/0x90 [virtio_net] [ 4761.126635] remove_vq_common+0x1a4/0x250 [virtio_net] [ 4761.131781] virtnet_remove+0x5d/0x70 [virtio_net] [ 4761.136580] virtio_dev_remove+0x3a/0x90 [ 4761.140509] device_release_driver_internal+0x19b/0x200 [ 4761.145742] bus_remove_device+0xc2/0x130 [ 4761.149755] device_del+0x158/0x3e0 [ 4761.153245] ? kernfs_find_ns+0x35/0xc0 [ 4761.157086] device_unregister+0x13/0x60 [ 4761.161010] unregister_virtio_device+0x11/0x20 [ 4761.165543] device_release_driver_internal+0x19b/0x200 [ 4761.170770] bus_remove_device+0xc2/0x130 [ 4761.174782] device_del+0x158/0x3e0 [ 4761.178276] ? __pfx_vdpa_name_match+0x10/0x10 [vdpa] [ 4761.183336] device_unregister+0x13/0x60 [ 4761.187260] vdpa_nl_cmd_dev_del_set_doit+0x63/0xe0 [vdpa] | ||||
| CVE-2023-54289 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qedf: Fix NULL dereference in error handling Smatch reported: drivers/scsi/qedf/qedf_main.c:3056 qedf_alloc_global_queues() warn: missing unwind goto? At this point in the function, nothing has been allocated so we can return directly. In particular the "qedf->global_queues" have not been allocated so calling qedf_free_global_queues() will lead to a NULL dereference when we check if (!gl[i]) and "gl" is NULL. | ||||
| CVE-2023-54288 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fortify the spinlock against deadlock by interrupt In the function ieee80211_tx_dequeue() there is a particular locking sequence: begin: spin_lock(&local->queue_stop_reason_lock); q_stopped = local->queue_stop_reasons[q]; spin_unlock(&local->queue_stop_reason_lock); However small the chance (increased by ftracetest), an asynchronous interrupt can occur in between of spin_lock() and spin_unlock(), and the interrupt routine will attempt to lock the same &local->queue_stop_reason_lock again. This will cause a costly reset of the CPU and the wifi device or an altogether hang in the single CPU and single core scenario. The only remaining spin_lock(&local->queue_stop_reason_lock) that did not disable interrupts was patched, which should prevent any deadlocks on the same CPU/core and the same wifi device. This is the probable trace of the deadlock: kernel: ================================ kernel: WARNING: inconsistent lock state kernel: 6.3.0-rc6-mt-20230401-00001-gf86822a1170f #4 Tainted: G W kernel: -------------------------------- kernel: inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. kernel: kworker/5:0/25656 [HC0[0]:SC0[0]:HE1:SE1] takes: kernel: ffff9d6190779478 (&local->queue_stop_reason_lock){+.?.}-{2:2}, at: return_to_handler+0x0/0x40 kernel: {IN-SOFTIRQ-W} state was registered at: kernel: lock_acquire+0xc7/0x2d0 kernel: _raw_spin_lock+0x36/0x50 kernel: ieee80211_tx_dequeue+0xb4/0x1330 [mac80211] kernel: iwl_mvm_mac_itxq_xmit+0xae/0x210 [iwlmvm] kernel: iwl_mvm_mac_wake_tx_queue+0x2d/0xd0 [iwlmvm] kernel: ieee80211_queue_skb+0x450/0x730 [mac80211] kernel: __ieee80211_xmit_fast.constprop.66+0x834/0xa50 [mac80211] kernel: __ieee80211_subif_start_xmit+0x217/0x530 [mac80211] kernel: ieee80211_subif_start_xmit+0x60/0x580 [mac80211] kernel: dev_hard_start_xmit+0xb5/0x260 kernel: __dev_queue_xmit+0xdbe/0x1200 kernel: neigh_resolve_output+0x166/0x260 kernel: ip_finish_output2+0x216/0xb80 kernel: __ip_finish_output+0x2a4/0x4d0 kernel: ip_finish_output+0x2d/0xd0 kernel: ip_output+0x82/0x2b0 kernel: ip_local_out+0xec/0x110 kernel: igmpv3_sendpack+0x5c/0x90 kernel: igmp_ifc_timer_expire+0x26e/0x4e0 kernel: call_timer_fn+0xa5/0x230 kernel: run_timer_softirq+0x27f/0x550 kernel: __do_softirq+0xb4/0x3a4 kernel: irq_exit_rcu+0x9b/0xc0 kernel: sysvec_apic_timer_interrupt+0x80/0xa0 kernel: asm_sysvec_apic_timer_interrupt+0x1f/0x30 kernel: _raw_spin_unlock_irqrestore+0x3f/0x70 kernel: free_to_partial_list+0x3d6/0x590 kernel: __slab_free+0x1b7/0x310 kernel: kmem_cache_free+0x52d/0x550 kernel: putname+0x5d/0x70 kernel: do_sys_openat2+0x1d7/0x310 kernel: do_sys_open+0x51/0x80 kernel: __x64_sys_openat+0x24/0x30 kernel: do_syscall_64+0x5c/0x90 kernel: entry_SYSCALL_64_after_hwframe+0x72/0xdc kernel: irq event stamp: 5120729 kernel: hardirqs last enabled at (5120729): [<ffffffff9d149936>] trace_graph_return+0xd6/0x120 kernel: hardirqs last disabled at (5120728): [<ffffffff9d149950>] trace_graph_return+0xf0/0x120 kernel: softirqs last enabled at (5069900): [<ffffffff9cf65b60>] return_to_handler+0x0/0x40 kernel: softirqs last disabled at (5067555): [<ffffffff9cf65b60>] return_to_handler+0x0/0x40 kernel: other info that might help us debug this: kernel: Possible unsafe locking scenario: kernel: CPU0 kernel: ---- kernel: lock(&local->queue_stop_reason_lock); kernel: <Interrupt> kernel: lock(&local->queue_stop_reason_lock); kernel: *** DEADLOCK *** kernel: 8 locks held by kworker/5:0/25656: kernel: #0: ffff9d618009d138 ((wq_completion)events_freezable){+.+.}-{0:0}, at: process_one_work+0x1ca/0x530 kernel: #1: ffffb1ef4637fe68 ((work_completion)(&local->restart_work)){+.+.}-{0:0}, at: process_one_work+0x1ce/0x530 kernel: #2: ffffffff9f166548 (rtnl_mutex){+.+.}-{3:3}, at: return_to_handler+0x0/0x40 kernel: #3: ffff9d619 ---truncated--- | ||||