Export limit exceeded: 430549 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26769 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-54056 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: kheaders: Use array declaration instead of char Under CONFIG_FORTIFY_SOURCE, memcpy() will check the size of destination and source buffers. Defining kernel_headers_data as "char" would trip this check. Since these addresses are treated as byte arrays, define them as arrays (as done everywhere else). This was seen with: $ cat /sys/kernel/kheaders.tar.xz >> /dev/null detected buffer overflow in memcpy kernel BUG at lib/string_helpers.c:1027! ... RIP: 0010:fortify_panic+0xf/0x20 [...] Call Trace: <TASK> ikheaders_read+0x45/0x50 [kheaders] kernfs_fop_read_iter+0x1a4/0x2f0 ... | ||||
| CVE-2023-54057 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Add a length limitation for the ivrs_acpihid command-line parameter The 'acpiid' buffer in the parse_ivrs_acpihid function may overflow, because the string specifier in the format string sscanf() has no width limitation. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2023-54058 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_ffa: Check if ffa_driver remove is present before executing Currently ffa_drv->remove() is called unconditionally from ffa_device_remove(). Since the driver registration doesn't check for it and allows it to be registered without .remove callback, we need to check for the presence of it before executing it from ffa_device_remove() to above a NULL pointer dereference like the one below: | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 | Mem abort info: | ESR = 0x0000000086000004 | EC = 0x21: IABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | FSC = 0x04: level 0 translation fault | user pgtable: 4k pages, 48-bit VAs, pgdp=0000000881cc8000 | [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 | Internal error: Oops: 0000000086000004 [#1] PREEMPT SMP | CPU: 3 PID: 130 Comm: rmmod Not tainted 6.3.0-rc7 #6 | Hardware name: FVP Base RevC (DT) | pstate: 63402809 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=-c) | pc : 0x0 | lr : ffa_device_remove+0x20/0x2c | Call trace: | 0x0 | device_release_driver_internal+0x16c/0x260 | driver_detach+0x90/0xd0 | bus_remove_driver+0xdc/0x11c | driver_unregister+0x30/0x54 | ffa_driver_unregister+0x14/0x20 | cleanup_module+0x18/0xeec | __arm64_sys_delete_module+0x234/0x378 | invoke_syscall+0x40/0x108 | el0_svc_common+0xb4/0xf0 | do_el0_svc+0x30/0xa4 | el0_svc+0x2c/0x7c | el0t_64_sync_handler+0x84/0xf0 | el0t_64_sync+0x190/0x194 | ||||
| CVE-2023-54059 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: soc: mediatek: mtk-svs: Enable the IRQ later If the system does not come from reset (like when is booted via kexec()), the peripheral might triger an IRQ before the data structures are initialised. [ 0.227710] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000f08 [ 0.227913] Call trace: [ 0.227918] svs_isr+0x8c/0x538 | ||||
| CVE-2023-54078 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: max9286: Free control handler The control handler is leaked in some probe-time error paths, as well as in the remove path. Fix it. | ||||
| CVE-2023-54080 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: skip splitting and logical rewriting on pre-alloc write When doing a relocation, there is a chance that at the time of btrfs_reloc_clone_csums(), there is no checksum for the corresponding region. In this case, btrfs_finish_ordered_zoned()'s sum points to an invalid item and so ordered_extent's logical is set to some invalid value. Then, btrfs_lookup_block_group() in btrfs_zone_finish_endio() failed to find a block group and will hit an assert or a null pointer dereference as following. This can be reprodcued by running btrfs/028 several times (e.g, 4 to 16 times) with a null_blk setup. The device's zone size and capacity is set to 32 MB and the storage size is set to 5 GB on my setup. KASAN: null-ptr-deref in range [0x0000000000000088-0x000000000000008f] CPU: 6 PID: 3105720 Comm: kworker/u16:13 Tainted: G W 6.5.0-rc6-kts+ #1 Hardware name: Supermicro Super Server/X10SRL-F, BIOS 2.0 12/17/2015 Workqueue: btrfs-endio-write btrfs_work_helper [btrfs] RIP: 0010:btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs] Code: 41 54 49 89 fc 55 48 89 f5 53 e8 57 7d fc ff 48 8d b8 88 00 00 00 48 89 c3 48 b8 00 00 00 00 00 > 3c 02 00 0f 85 02 01 00 00 f6 83 88 00 00 00 01 0f 84 a8 00 00 RSP: 0018:ffff88833cf87b08 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000011 RSI: 0000000000000004 RDI: 0000000000000088 RBP: 0000000000000002 R08: 0000000000000001 R09: ffffed102877b827 R10: ffff888143bdc13b R11: ffff888125b1cbc0 R12: ffff888143bdc000 R13: 0000000000007000 R14: ffff888125b1cba8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88881e500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3ed85223d5 CR3: 00000001519b4005 CR4: 00000000001706e0 Call Trace: <TASK> ? die_addr+0x3c/0xa0 ? exc_general_protection+0x148/0x220 ? asm_exc_general_protection+0x22/0x30 ? btrfs_zone_finish_endio.part.0+0x34/0x160 [btrfs] ? btrfs_zone_finish_endio.part.0+0x19/0x160 [btrfs] btrfs_finish_one_ordered+0x7b8/0x1de0 [btrfs] ? rcu_is_watching+0x11/0xb0 ? lock_release+0x47a/0x620 ? btrfs_finish_ordered_zoned+0x59b/0x800 [btrfs] ? __pfx_btrfs_finish_one_ordered+0x10/0x10 [btrfs] ? btrfs_finish_ordered_zoned+0x358/0x800 [btrfs] ? __smp_call_single_queue+0x124/0x350 ? rcu_is_watching+0x11/0xb0 btrfs_work_helper+0x19f/0xc60 [btrfs] ? __pfx_try_to_wake_up+0x10/0x10 ? _raw_spin_unlock_irq+0x24/0x50 ? rcu_is_watching+0x11/0xb0 process_one_work+0x8c1/0x1430 ? __pfx_lock_acquire+0x10/0x10 ? __pfx_process_one_work+0x10/0x10 ? __pfx_do_raw_spin_lock+0x10/0x10 ? _raw_spin_lock_irq+0x52/0x60 worker_thread+0x100/0x12c0 ? __kthread_parkme+0xc1/0x1f0 ? __pfx_worker_thread+0x10/0x10 kthread+0x2ea/0x3c0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x30/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> On the zoned mode, writing to pre-allocated region means data relocation write. Such write always uses WRITE command so there is no need of splitting and rewriting logical address. Thus, we can just skip the function for the case. | ||||
| CVE-2023-54081 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xen: speed up grant-table reclaim When a grant entry is still in use by the remote domain, Linux must put it on a deferred list. Normally, this list is very short, because the PV network and block protocols expect the backend to unmap the grant first. However, Qubes OS's GUI protocol is subject to the constraints of the X Window System, and as such winds up with the frontend unmapping the window first. As a result, the list can grow very large, resulting in a massive memory leak and eventual VM freeze. To partially solve this problem, make the number of entries that the VM will attempt to free at each iteration tunable. The default is still 10, but it can be overridden via a module parameter. This is Cc: stable because (when combined with appropriate userspace changes) it fixes a severe performance and stability problem for Qubes OS users. | ||||
| CVE-2023-54117 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/dcssblk: fix kernel crash with list_add corruption Commit fb08a1908cb1 ("dax: simplify the dax_device <-> gendisk association") introduced new logic for gendisk association, requiring drivers to explicitly call dax_add_host() and dax_remove_host(). For dcssblk driver, some dax_remove_host() calls were missing, e.g. in device remove path. The commit also broke error handling for out_dax case in device add path, resulting in an extra put_device() w/o the previous get_device() in that case. This lead to stale xarray entries after device add / remove cycles. In the case when a previously used struct gendisk pointer (xarray index) would be used again, because blk_alloc_disk() happened to return such a pointer, the xa_insert() in dax_add_host() would fail and go to out_dax, doing the extra put_device() in the error path. In combination with an already flawed error handling in dcssblk (device_register() cleanup), which needs to be addressed in a separate patch, this resulted in a missing device_del() / klist_del(), and eventually in the kernel crash with list_add corruption on a subsequent device_add() / klist_add(). Fix this by adding the missing dax_remove_host() calls, and also move the put_device() in the error path to restore the previous logic. | ||||
| CVE-2023-54118 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: sc16is7xx: setup GPIO controller later in probe The GPIO controller component of the sc16is7xx driver is setup too early, which can result in a race condition where another device tries to utilise the GPIO lines before the sc16is7xx device has finished initialising. This issue manifests itself as an Oops when the GPIO lines are configured: Unable to handle kernel read from unreadable memory at virtual address ... pc : sc16is7xx_gpio_direction_output+0x68/0x108 [sc16is7xx] lr : sc16is7xx_gpio_direction_output+0x4c/0x108 [sc16is7xx] ... Call trace: sc16is7xx_gpio_direction_output+0x68/0x108 [sc16is7xx] gpiod_direction_output_raw_commit+0x64/0x318 gpiod_direction_output+0xb0/0x170 create_gpio_led+0xec/0x198 gpio_led_probe+0x16c/0x4f0 platform_drv_probe+0x5c/0xb0 really_probe+0xe8/0x448 driver_probe_device+0xe8/0x138 __device_attach_driver+0x94/0x118 bus_for_each_drv+0x8c/0xe0 __device_attach+0x100/0x1b8 device_initial_probe+0x28/0x38 bus_probe_device+0xa4/0xb0 deferred_probe_work_func+0x90/0xe0 process_one_work+0x1c4/0x480 worker_thread+0x54/0x430 kthread+0x138/0x150 ret_from_fork+0x10/0x1c This patch moves the setup of the GPIO controller functions to later in the probe function, ensuring the sc16is7xx device has already finished initialising by the time other devices try to make use of the GPIO lines. The error handling has also been reordered to reflect the new initialisation order. | ||||
| CVE-2023-54119 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: inotify: Avoid reporting event with invalid wd When inotify_freeing_mark() races with inotify_handle_inode_event() it can happen that inotify_handle_inode_event() sees that i_mark->wd got already reset to -1 and reports this value to userspace which can confuse the inotify listener. Avoid the problem by validating that wd is sensible (and pretend the mark got removed before the event got generated otherwise). | ||||
| CVE-2023-54137 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vfio/type1: fix cap_migration information leak Fix an information leak where an uninitialized hole in struct vfio_iommu_type1_info_cap_migration on the stack is exposed to userspace. The definition of struct vfio_iommu_type1_info_cap_migration contains a hole as shown in this pahole(1) output: struct vfio_iommu_type1_info_cap_migration { struct vfio_info_cap_header header; /* 0 8 */ __u32 flags; /* 8 4 */ /* XXX 4 bytes hole, try to pack */ __u64 pgsize_bitmap; /* 16 8 */ __u64 max_dirty_bitmap_size; /* 24 8 */ /* size: 32, cachelines: 1, members: 4 */ /* sum members: 28, holes: 1, sum holes: 4 */ /* last cacheline: 32 bytes */ }; The cap_mig variable is filled in without initializing the hole: static int vfio_iommu_migration_build_caps(struct vfio_iommu *iommu, struct vfio_info_cap *caps) { struct vfio_iommu_type1_info_cap_migration cap_mig; cap_mig.header.id = VFIO_IOMMU_TYPE1_INFO_CAP_MIGRATION; cap_mig.header.version = 1; cap_mig.flags = 0; /* support minimum pgsize */ cap_mig.pgsize_bitmap = (size_t)1 << __ffs(iommu->pgsize_bitmap); cap_mig.max_dirty_bitmap_size = DIRTY_BITMAP_SIZE_MAX; return vfio_info_add_capability(caps, &cap_mig.header, sizeof(cap_mig)); } The structure is then copied to a temporary location on the heap. At this point it's already too late and ioctl(VFIO_IOMMU_GET_INFO) copies it to userspace later: int vfio_info_add_capability(struct vfio_info_cap *caps, struct vfio_info_cap_header *cap, size_t size) { struct vfio_info_cap_header *header; header = vfio_info_cap_add(caps, size, cap->id, cap->version); if (IS_ERR(header)) return PTR_ERR(header); memcpy(header + 1, cap + 1, size - sizeof(*header)); return 0; } This issue was found by code inspection. | ||||
| CVE-2023-54138 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: fix NULL-deref on irq uninstall In case of early initialisation errors and on platforms that do not use the DPU controller, the deinitilisation code can be called with the kms pointer set to NULL. Patchwork: https://patchwork.freedesktop.org/patch/525104/ | ||||
| CVE-2023-54147 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: platform: mtk-mdp3: Add missing check and free for ida_alloc Add the check for the return value of the ida_alloc in order to avoid NULL pointer dereference. Moreover, free allocated "ctx->id" if mdp_m2m_open fails later in order to avoid memory leak. | ||||
| CVE-2023-54159 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: mtu3: fix kernel panic at qmu transfer done irq handler When handle qmu transfer irq, it will unlock @mtu->lock before give back request, if another thread handle disconnect event at the same time, and try to disable ep, it may lock @mtu->lock and free qmu ring, then qmu irq hanlder may get a NULL gpd, avoid the KE by checking gpd's value before handling it. e.g. qmu done irq on cpu0 thread running on cpu1 qmu_done_tx() handle gpd [0] mtu3_requ_complete() mtu3_gadget_ep_disable() unlock @mtu->lock give back request lock @mtu->lock mtu3_ep_disable() mtu3_gpd_ring_free() unlock @mtu->lock lock @mtu->lock get next gpd [1] [1]: goto [0] to handle next gpd, and next gpd may be NULL. | ||||
| CVE-2023-54160 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_sdei: Fix sleep from invalid context BUG Running a preempt-rt (v6.2-rc3-rt1) based kernel on an Ampere Altra triggers: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46 in_atomic(): 0, irqs_disabled(): 128, non_block: 0, pid: 24, name: cpuhp/0 preempt_count: 0, expected: 0 RCU nest depth: 0, expected: 0 3 locks held by cpuhp/0/24: #0: ffffda30217c70d0 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x5c/0x248 #1: ffffda30217c7120 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x5c/0x248 #2: ffffda3021c711f0 (sdei_list_lock){....}-{3:3}, at: sdei_cpuhp_up+0x3c/0x130 irq event stamp: 36 hardirqs last enabled at (35): [<ffffda301e85b7bc>] finish_task_switch+0xb4/0x2b0 hardirqs last disabled at (36): [<ffffda301e812fec>] cpuhp_thread_fun+0x21c/0x248 softirqs last enabled at (0): [<ffffda301e80b184>] copy_process+0x63c/0x1ac0 softirqs last disabled at (0): [<0000000000000000>] 0x0 CPU: 0 PID: 24 Comm: cpuhp/0 Not tainted 5.19.0-rc3-rt5-[...] Hardware name: WIWYNN Mt.Jade Server [...] Call trace: dump_backtrace+0x114/0x120 show_stack+0x20/0x70 dump_stack_lvl+0x9c/0xd8 dump_stack+0x18/0x34 __might_resched+0x188/0x228 rt_spin_lock+0x70/0x120 sdei_cpuhp_up+0x3c/0x130 cpuhp_invoke_callback+0x250/0xf08 cpuhp_thread_fun+0x120/0x248 smpboot_thread_fn+0x280/0x320 kthread+0x130/0x140 ret_from_fork+0x10/0x20 sdei_cpuhp_up() is called in the STARTING hotplug section, which runs with interrupts disabled. Use a CPUHP_AP_ONLINE_DYN entry instead to execute the cpuhp cb later, with preemption enabled. SDEI originally got its own cpuhp slot to allow interacting with perf. It got superseded by pNMI and this early slot is not relevant anymore. [1] Some SDEI calls (e.g. SDEI_1_0_FN_SDEI_PE_MASK) take actions on the calling CPU. It is checked that preemption is disabled for them. _ONLINE cpuhp cb are executed in the 'per CPU hotplug thread'. Preemption is enabled in those threads, but their cpumask is limited to 1 CPU. Move 'WARN_ON_ONCE(preemptible())' statements so that SDEI cpuhp cb don't trigger them. Also add a check for the SDEI_1_0_FN_SDEI_PRIVATE_RESET SDEI call which acts on the calling CPU. [1]: https://lore.kernel.org/all/5813b8c5-ae3e-87fd-fccc-94c9cd08816d@arm.com/ | ||||
| CVE-2023-54320 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd: pmc: Fix memory leak in amd_pmc_stb_debugfs_open_v2() Function amd_pmc_stb_debugfs_open_v2() may be called when the STB debug mechanism enabled. When amd_pmc_send_cmd() fails, the 'buf' needs to be released. | ||||
| CVE-2023-54314 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: af9005: Fix null-ptr-deref in af9005_i2c_xfer In af9005_i2c_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach af9005_i2c_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") | ||||
| CVE-2023-54181 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix issue in verifying allow_ptr_leaks After we converted the capabilities of our networking-bpf program from cap_sys_admin to cap_net_admin+cap_bpf, our networking-bpf program failed to start. Because it failed the bpf verifier, and the error log is "R3 pointer comparison prohibited". A simple reproducer as follows, SEC("cls-ingress") int ingress(struct __sk_buff *skb) { struct iphdr *iph = (void *)(long)skb->data + sizeof(struct ethhdr); if ((long)(iph + 1) > (long)skb->data_end) return TC_ACT_STOLEN; return TC_ACT_OK; } Per discussion with Yonghong and Alexei [1], comparison of two packet pointers is not a pointer leak. This patch fixes it. Our local kernel is 6.1.y and we expect this fix to be backported to 6.1.y, so stable is CCed. [1]. https://lore.kernel.org/bpf/CAADnVQ+Nmspr7Si+pxWn8zkE7hX-7s93ugwC+94aXSy4uQ9vBg@mail.gmail.com/ | ||||
| CVE-2023-54313 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ovl: fix null pointer dereference in ovl_get_acl_rcu() Following process: P1 P2 path_openat link_path_walk may_lookup inode_permission(rcu) ovl_permission acl_permission_check check_acl get_cached_acl_rcu ovl_get_inode_acl realinode = ovl_inode_real(ovl_inode) drop_cache __dentry_kill(ovl_dentry) iput(ovl_inode) ovl_destroy_inode(ovl_inode) dput(oi->__upperdentry) dentry_kill(upperdentry) dentry_unlink_inode upperdentry->d_inode = NULL ovl_inode_upper upperdentry = ovl_i_dentry_upper(ovl_inode) d_inode(upperdentry) // returns NULL IS_POSIXACL(realinode) // NULL pointer dereference , will trigger an null pointer dereference at realinode: [ 205.472797] BUG: kernel NULL pointer dereference, address: 0000000000000028 [ 205.476701] CPU: 2 PID: 2713 Comm: ls Not tainted 6.3.0-12064-g2edfa098e750-dirty #1216 [ 205.478754] RIP: 0010:do_ovl_get_acl+0x5d/0x300 [ 205.489584] Call Trace: [ 205.489812] <TASK> [ 205.490014] ovl_get_inode_acl+0x26/0x30 [ 205.490466] get_cached_acl_rcu+0x61/0xa0 [ 205.490908] generic_permission+0x1bf/0x4e0 [ 205.491447] ovl_permission+0x79/0x1b0 [ 205.491917] inode_permission+0x15e/0x2c0 [ 205.492425] link_path_walk+0x115/0x550 [ 205.493311] path_lookupat.isra.0+0xb2/0x200 [ 205.493803] filename_lookup+0xda/0x240 [ 205.495747] vfs_fstatat+0x7b/0xb0 Fetch a reproducer in [Link]. Use the helper ovl_i_path_realinode() to get realinode and then do non-nullptr checking. | ||||
| CVE-2023-54183 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: v4l2-core: Fix a potential resource leak in v4l2_fwnode_parse_link() If fwnode_graph_get_remote_endpoint() fails, 'fwnode' is known to be NULL, so fwnode_handle_put() is a no-op. Release the reference taken from a previous fwnode_graph_get_port_parent() call instead. Also handle fwnode_graph_get_port_parent() failures. In order to fix these issues, add an error handling path to the function and the needed gotos. | ||||