Search Results (222 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-55973 2 Nlnetlabs, Redhat 2 Unbound, Hummingbird 2026-07-28 7.5 High
In NLnet Labs Unbound 1.23.0 up to and including 1.25.1, when 'dns-error-reporting: yes' is set, the EDNS Report-Channel option (code 18) from the last upstream response is read and uses the option's length as the length of the agent domain. When a domain name check is performed on the agent domain, the returned lenght is not used and if the agent domain is followed by garbage, those bytes are moved onto the tail of the synthetic '_er.' report query name. That query name is later used in the iterator via a subquery to send out the DNS Error Report and when Unbound tries to walk that query name during 'find_closest_of_type()', it strips labels using the query name length rather than stopping at the embedded root, walks one byte past it, and feeds the first garbage byte to 'dname_query_hash()' as a label length writing over the stack variable 'labuf'. One ordinary upstream response from a delegated zone the attacker controls is sufficient to terminate the daemon.
CVE-2026-53877 1 Djangoproject 1 Django 2026-07-10 4.8 Medium
An issue was discovered in Django 6.0 before 6.0.7 and 5.2 before 5.2.16. `django.contrib.gis.gdal.GDALRaster` over-reads its in-memory buffer when constructed from a bytes object, which can disclose adjacent memory or cause service degradation via a potential segmentation fault when the `vsi_buffer` property is accessed. Earlier, unsupported Django series (such as 5.0.x, 4.1.x, and 3.2.x) were not evaluated and may also be affected. Django would like to thank Bence Nagy for reporting this issue.
CVE-2026-42771 1 Openssl 1 Openssl 2026-07-10 6.2 Medium
Issue summary: When the X509_VERIFY_PARAM_set1_email is called by an application to validate a crafted e-mail address, such as during S/MIME message validation, an out of bounds read can happen. Impact summary: This out of bounds read will not directly exfiltrate the data read to the attacker so the most likely result is a crash and a Denial of Service. An internal helper function called from X509_VERIFY_PARAM_[set|add]_email() used a wrong length when validating the local part of an email address. This could cause the 64 octet limit on the local part of an email address to be not enforced, or cause an out of bound read and potentially a crash. The bug is reachable via S-MIME validation with a crafted From: address supplied in an email message that can potentially cause a crash. No FIPS modules are affected by this issue as the affected code is outside the OpenSSL FIPS module boundary.
CVE-2026-55999 1 X.org 3 X Server, Xorg-server, Xwayland 2026-07-08 8.5 High
Local attackers with a X connection able to provide PCX fonts to the X server xorg-server before 21.2.24 and xwayland before 24.1.13 could cause a heap buffer overflow via SetFont due to missing glyph boundary checks.
CVE-2026-13574 1 Llvm 1 Llvm-project 2026-07-07 3.3 Low
A vulnerability was determined in llvm llvm-project up to 22.1.6. This impacts the function GCRelocateInst::getBasePtr in the library llvm/lib/IR/IntrinsicInst.cpp of the component Bitcode File Handler. This manipulation causes heap-based buffer overflow. It is possible to launch the attack on the local host. The exploit has been publicly disclosed and may be utilized. There are still doubts about whether this vulnerability truly exists. The LLVM project explains, that the reported behavior is outside its documented security scope and therefore not considered a security vulnerability.
CVE-2026-53235 1 Linux 1 Linux Kernel 2026-06-28 7.5 High
In the Linux kernel, the following vulnerability has been resolved: net: add pskb_may_pull() to skb_gro_receive_list() skb_gro_receive_list() calls skb_pull(skb, skb_gro_offset(skb)) without first ensuring the data is in the linear area via pskb_may_pull(). When the skb arrives via napi_gro_frags(), skb_headlen can be 0 (all data in page fragments) while skb_gro_offset is non-zero (after IP+TCP header parsing). The skb_pull() then decrements skb->len by skb_gro_offset but skb->data_len stays unchanged, hitting BUG_ON(skb->len < skb->data_len) in __skb_pull(). The UDP fraglist GRO path already contains this guard at udp_offload.c:749. Adding it to skb_gro_receive_list() itself provides centralized protection for all callers (TCP, UDP, and any future protocols), and ensures the precondition of skb_pull() is satisfied before it is called. On pskb_may_pull() failure, set NAPI_GRO_CB(skb)->flush = 1 so the skb is not held as a new GRO head and is instead delivered through the normal receive path, matching the UDP handling.
CVE-2026-20033 1 Cisco 1 Cisco Nx-os System Software In Aci Mode 2026-06-17 7.4 High
A vulnerability in Cisco Nexus 9000 Series Fabric Switches in ACI mode could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation when processing specific Ethernet frames. An attacker could exploit this vulnerability by sending a crafted Ethernet frame to the&nbsp;management interface of an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition. Note: Only the out-of-band (OOB) management interface is affected.
CVE-2026-1767 2 Gnome, Redhat 2 Localsearch, Enterprise Linux 2026-06-16 5.6 Medium
A flaw was found in the GNOME localsearch (previously known as tracker-miners) MP3 Extractor `tracker-extract-mp3` component. A remote attacker could exploit this heap buffer overflow vulnerability by providing a specially crafted MP3 file containing malformed ID3 tags. This incorrect length calculation during the parsing of performer tags can lead to a read beyond the allocated buffer, potentially causing a Denial of Service (DoS) due to a crash or enabling information disclosure.
CVE-2026-1766 2 Gnome, Redhat 2 Localsearch, Enterprise Linux 2026-06-16 5.6 Medium
A flaw was found in GNOME localsearch (previously known as tracker-miners) MP3 Extractor, specifically within the tracker-extract-mp3 component. This heap buffer overflow vulnerability occurs when processing specially crafted MP3 files containing malformed ID3v2.3 COMM (Comment) tags. An attacker could exploit this by providing a malicious MP3 file, leading to a denial of service (DoS), which causes an application crash, and potentially disclosing sensitive information from the heap memory.
CVE-2026-46186 1 Linux 1 Linux Kernel 2026-06-11 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: virtio_bt: validate rx pkt_type header length virtbt_rx_handle() reads the leading pkt_type byte from the RX skb and forwards the remainder to hci_recv_frame() for every event/ACL/SCO/ISO type, without checking that the remaining payload is at least the fixed HCI header for that type. After the preceding patch bounds the backend-supplied used.len to [1, VIRTBT_RX_BUF_SIZE], a one-byte completion still reaches hci_recv_frame() with skb->len already pulled to 0. If the byte happened to be HCI_ACLDATA_PKT, the ACL-vs-ISO classification fast-path in hci_dev_classify_pkt_type() dereferences hci_acl_hdr(skb)->handle whenever the HCI device has an active CIS_LINK, BIS_LINK, or PA_LINK connection, reading two bytes of uninitialized RX-buffer data. The same hazard exists for every packet type the driver accepts because none of the switch cases in virtbt_rx_handle() check skb->len against the per-type minimum HCI header size before handing the frame to the core. After stripping pkt_type, require skb->len to cover the fixed header size for the selected type (event 2, ACL 4, SCO 3, ISO 4) before calling hci_recv_frame(); drop ratelimited otherwise. Unknown pkt_type values still take the original kfree_skb() default path. Use bt_dev_err_ratelimited() because both the length and pkt_type values come from an untrusted backend that can otherwise flood the kernel log.
CVE-2026-46232 1 Linux 1 Linux Kernel 2026-06-10 8.1 High
In the Linux kernel, the following vulnerability has been resolved: HID: playstation: Clamp num_touch_reports A device would never lie about the number of touch reports would it? If it does the loop in dualshock4_parse_report will read off the end of the touch_reports array, up to about 2 KiB for the maximum number of 256 loop iteraions. The data that is read is emitted via evdev if the DS4_TOUCH_POINT_INACTIVE bit happens to be set. Protect against this by clamping the num_touch_reports value provided by the device to the maximum size of the touch_reports array.
CVE-2026-32284 1 Shamaton 1 Msgpack 2026-06-03 7.5 High
The msgpack decoder fails to properly validate the input buffer length when processing truncated fixext data (format codes 0xd4-0xd8). This can lead to an out-of-bounds read and a runtime panic, allowing a denial of service attack.
CVE-2026-9913 1 Google 1 Chrome 2026-06-01 4.3 Medium
Inappropriate implementation in ANGLE in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to potentially perform out of bounds memory access via a crafted HTML page. (Chromium security severity: High)
CVE-2026-45935 1 Linux 1 Linux Kernel 2026-05-30 7.8 High
In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix slab-out-of-bounds read in DeleteIndexEntryRoot In the 'DeleteIndexEntryRoot' case of the 'do_action' function, the entry size ('esize') is retrieved from the log record without adequate bounds checking. Specifically, the code calculates the end of the entry ('e2') using: e2 = Add2Ptr(e1, esize); It then calculates the size for memmove using 'PtrOffset(e2, ...)', which subtracts the end pointer from the buffer limit. If 'esize' is maliciously large, 'e2' exceeds the used buffer size. This results in a negative offset which, when cast to size_t for memmove, interprets as a massive unsigned integer, leading to a heap buffer overflow. This commit adds a check to ensure that the entry size ('esize') strictly fits within the remaining used space of the index header before performing memory operations.
CVE-2026-43070 1 Linux 1 Linux Kernel 2026-05-29 7.8 High
In the Linux kernel, the following vulnerability has been resolved: bpf: Reset register ID for BPF_END value tracking When a register undergoes a BPF_END (byte swap) operation, its scalar value is mutated in-place. If this register previously shared a scalar ID with another register (e.g., after an `r1 = r0` assignment), this tie must be broken. Currently, the verifier misses resetting `dst_reg->id` to 0 for BPF_END. Consequently, if a conditional jump checks the swapped register, the verifier incorrectly propagates the learned bounds to the linked register, leading to false confidence in the linked register's value and potentially allowing out-of-bounds memory accesses. Fix this by explicitly resetting `dst_reg->id` to 0 in the BPF_END case to break the scalar tie, similar to how BPF_NEG handles it via `__mark_reg_known`.
CVE-2026-43386 1 Linux 1 Linux Kernel 2026-05-26 7.1 High
In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix potential out-of-bounds read in rtw_restruct_wmm_ie The current code checks 'i + 5 < in_len' at the end of the if statement. However, it accesses 'in_ie[i + 5]' before that check, which can lead to an out-of-bounds read. Move the length check to the beginning of the conditional to ensure the index is within bounds before accessing the array.
CVE-2026-43442 1 Linux 1 Linux Kernel 2026-05-21 7.1 High
In the Linux kernel, the following vulnerability has been resolved: io_uring: fix physical SQE bounds check for SQE_MIXED 128-byte ops When IORING_SETUP_SQE_MIXED is used without IORING_SETUP_NO_SQARRAY, the boundary check for 128-byte SQE operations in io_init_req() validated the logical SQ head position rather than the physical SQE index. The existing check: !(ctx->cached_sq_head & (ctx->sq_entries - 1)) ensures the logical position isn't at the end of the ring, which is correct for NO_SQARRAY rings where physical == logical. However, when sq_array is present, an unprivileged user can remap any logical position to an arbitrary physical index via sq_array. Setting sq_array[N] = sq_entries - 1 places a 128-byte operation at the last physical SQE slot, causing the 128-byte memcpy in io_uring_cmd_sqe_copy() to read 64 bytes past the end of the SQE array. Replace the cached_sq_head alignment check with a direct validation of the physical SQE index, which correctly handles both sq_array and NO_SQARRAY cases.
CVE-2026-43307 1 Linux 1 Linux Kernel 2026-05-15 7.8 High
In the Linux kernel, the following vulnerability has been resolved: iio: accel: adxl380: Avoid reading more entries than present in FIFO The interrupt handler reads FIFO entries in batches of N samples, where N is the number of scan elements that have been enabled. However, the sensor fills the FIFO one sample at a time, even when more than one channel is enabled. Therefore,the number of entries reported by the FIFO status registers may not be a multiple of N; if this number is not a multiple, the number of entries read from the FIFO may exceed the number of entries actually present. To fix the above issue, round down the number of FIFO entries read from the status registers so that it is always a multiple of N.
CVE-2026-8449 1 Linux 1 Ksmbd 2026-05-13 8.8 High
This CVE ID has been rejected or withdrawn.
CVE-2026-43006 1 Linux 1 Linux Kernel 2026-05-12 7.1 High
In the Linux kernel, the following vulnerability has been resolved: io_uring/rsrc: reject zero-length fixed buffer import validate_fixed_range() admits buf_addr at the exact end of the registered region when len is zero, because the check uses strict greater-than (buf_end > imu->ubuf + imu->len). io_import_fixed() then computes offset == imu->len, which causes the bvec skip logic to advance past the last bio_vec entry and read bv_offset from out-of-bounds slab memory. Return early from io_import_fixed() when len is zero. A zero-length import has no data to transfer and should not walk the bvec array at all. BUG: KASAN: slab-out-of-bounds in io_import_reg_buf+0x697/0x7f0 Read of size 4 at addr ffff888002bcc254 by task poc/103 Call Trace: io_import_reg_buf+0x697/0x7f0 io_write_fixed+0xd9/0x250 __io_issue_sqe+0xad/0x710 io_issue_sqe+0x7d/0x1100 io_submit_sqes+0x86a/0x23c0 __do_sys_io_uring_enter+0xa98/0x1590 Allocated by task 103: The buggy address is located 12 bytes to the right of allocated 584-byte region [ffff888002bcc000, ffff888002bcc248)