| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: reject free space cache with more entries than pages
When loading a v1 free space cache, __load_free_space_cache() takes
num_entries and num_bitmaps straight from the on-disk
btrfs_free_space_header. That header is stored in the tree_root under a key
with type 0, which the tree-checker has no case for, so neither count is
validated before the load trusts it.
The load loops num_entries times and maps the next page whenever the current
one runs out, going through io_ctl_check_crc() -> io_ctl_map_page(), which
does io_ctl->pages[io_ctl->index++]. But pages[] is allocated in
io_ctl_init() from the cache inode's i_size, not from num_entries:
num_pages = DIV_ROUND_UP(i_size_read(inode), PAGE_SIZE);
io_ctl->pages = kcalloc(num_pages, sizeof(struct page *), GFP_NOFS);
So if num_entries claims more records than the pages can hold, io_ctl->index
runs off the end of pages[]. The write side never hits this because
io_ctl_add_entry() and io_ctl_add_bitmap() both stop once
io_ctl->index >= io_ctl->num_pages; the read side just never had the same
check.
To trigger it, take a clean cache (num_entries = <N> here), set num_entries
in the header to 0x10000, and fix up the leaf checksum so it still passes
the tree-checker. The cache inode has i_size = 65536, so num_pages is 16 and
pages[] is a 16-pointer (kmalloc-128) array. The load now tries to read
65536 entries, io_ctl->index walks up to 16, and pages[16] is read past the
array:
BUG: KASAN: slab-out-of-bounds in io_ctl_check_crc (fs/btrfs/free-space-cache.c:420 fs/btrfs/free-space-cache.c:565)
Read of size 8 at addr ffff88800c833a80 by task kworker/u8:3/58
io_ctl_check_crc (fs/btrfs/free-space-cache.c:420 fs/btrfs/free-space-cache.c:565)
__load_free_space_cache (fs/btrfs/free-space-cache.c:655 fs/btrfs/free-space-cache.c:820)
load_free_space_cache (fs/btrfs/free-space-cache.c:1017)
caching_thread (fs/btrfs/block-group.c:880)
btrfs_work_helper (fs/btrfs/async-thread.c:312)
process_one_work
worker_thread
kthread
ret_from_fork
free-space-cache.c:420 is io_ctl_map_page(), inlined into io_ctl_check_crc()
at line 565, which is why that is the frame KASAN names. The out-of-bounds
slot is then treated as a struct page and handed to crc32c(), so the bad
read turns into a GP fault.
Add the missing check to io_ctl_check_crc(), which is where both the entry
loop and the bitmap loop end up. When num_entries is too large the load now
fails like any corrupt cache: __load_free_space_cache() drops it and rebuilds
the free space from the extent tree, so a valid cache is never rejected. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix fils_discovery double free on alloc failure
ieee80211_set_fils_discovery() calls kfree_rcu() on the old template
before allocating the replacement. If the kzalloc() then fails, it
returns -ENOMEM while link->u.ap.fils_discovery still points at the
object already queued for freeing. A later update or AP teardown
(ieee80211_stop_ap()) re-queues that same rcu_head; the second free is
caught by KASAN when the RCU sheaf is processed in softirq:
BUG: KASAN: double-free in rcu_free_sheaf (mm/slub.c:5850)
Free of addr ffff88800c065280 by task swapper/0/0
...
__rcu_free_sheaf_prepare (mm/slub.c:2634 mm/slub.c:2940)
rcu_free_sheaf (mm/slub.c:5850)
rcu_core (kernel/rcu/tree.c:2617 kernel/rcu/tree.c:2869)
handle_softirqs (kernel/softirq.c:622)
The buggy address belongs to the cache kmalloc-96 of size 96
Queue the old object for kfree_rcu() only after the new one is published,
matching ieee80211_set_probe_resp() and ieee80211_set_s1g_short_beacon(). |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/IOV: Skip VF Resizable BAR restore on read error
sriov_restore_vf_rebar_state() uses the VF Resizable BAR Control register
to decide how many VF BARs to restore (nbars) and which VF BAR each
iteration addresses (bar_idx). bar_idx indexes into dev->sriov->barsz[],
which has only PCI_SRIOV_NUM_BARS (6) entries.
When a device does not respond, config reads typically return
PCI_ERROR_RESPONSE (~0). Both fields are 3 bits wide, so nbars and bar_idx
both evaluate to 7. The barsz[] access then goes out of bounds. UBSAN
reports this as:
UBSAN: array-index-out-of-bounds in drivers/pci/iov.c:948:51 index 7 is out of range for type 'resource_size_t [6]'
Observed on an NVIDIA RTX PRO 1000 GPU (GB207GLM) that stopped responding
during a failed GC6 power state exit. The subsequent pci_restore_state()
invoked sriov_restore_vf_rebar_state() while config reads returned
0xffffffff, triggering the splat.
Bail out if any VF Resizable BAR Control read returns PCI_ERROR_RESPONSE.
No further VF BARs are touched, which is safe because a config read that
returns PCI_ERROR_RESPONSE indicates the device is unreachable and
restoration is pointless. This mirrors the guard in
pci_restore_rebar_state(). |
| Heap-based buffer overflow in Windows Client for NFS allows an authorized attacker to elevate privileges locally. |
| Stack-based buffer overflow in Windows Remote Desktop Services allows an authorized attacker to elevate privileges locally. |
| Insufficient granularity of access control in Windows IKE Extension allows an authorized attacker to perform spoofing locally. |
| Heap-based buffer overflow in HID Parser Library allows an unauthorized attacker to elevate privileges with a physical attack. |
| NASA JPL ION-DTN 3.6.2 through 4.2.0 contains a heap-based buffer overflow in the Network Management daemon (nm_mgr) string-formatting logic that allows a malicious or misconfigured agent to trigger an out-of-bounds write by sending deeply nested AMP payloads that exceed fixed-size buffer allocations through unbounded strcat operations. Attackers can transmit oversized AMP reports, tables, or macros over the UDP CLA/AMP path or trigger the flaw locally via interactive UI rendering to crash nm_mgr and cause a denial of service halting telemetry collection and operator visibility. |
| SIPSorcery is a WebRTC, SIP, and VoIP library for C# and .NET. Prior to 10.0.14, SctpSackChunk.ParseChunk reads the numGapAckBlocks and numDuplicateTSNs fields from an attacker-controlled SCTP SACK chunk without checking that the corresponding entries fit the declared chunk length. A negotiated WebRTC peer can send a checksum-valid malformed SACK chunk that drives the parser beyond the 262144-byte receive buffer. The resulting IndexOutOfRangeException bypasses the recoverable ApplicationException handler in RTCSctpTransport.DoReceive, causing the generic handler to exit the dedicated receive loop and permanently terminate the SCTP association and all data channels. This issue is fixed in 10.0.14. |
| After Effects is affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| The Node.js web service on VOS (previously Versa FlexVNF) is used for URL-based Zero Touch Provisioning (ZTP) of the VOS appliance and is not required after provisioning is complete. The /decryptTest endpoint of this service is registered in server.js before the session authentication middleware and creates an authenticated session whenever it receives a token that decrypts successfully. Because the key and initialization vector (IV) used for decryption are hardcoded and identical across all VOS appliances, an unauthenticated attacker with network access can compute a valid token, submit it to /decryptTest, and obtain a fully authenticated session without providing any credentials.
Versa’s security hardening guide for Hubs, Branches, and Controllers recommends disabling the Node.js web service after the initial provisioning of the VOS device. This vulnerability is not exploitable on VOS devices where the Node.js web service has been disabled. |
| The Node.js web service on VOS (previously Versa FlexVNF) is used for URL-based Zero Touch Provisioning (ZTP) of the VOS appliance and is not required after provisioning is complete. This service authenticates users and administrators to its web interface during initial provisioning using default credentials and HTTP Basic Authentication. An attacker with network access who knows the default credentials could authenticate to the service and perform provisioning actions on the VOS appliance.
Versa’s security hardening guide for Hubs, Branches, and Controllers recommends disabling the Node.js web service after the initial provisioning of the VOS device. This vulnerability is not exploitable on VOS devices where the Node.js web service has been disabled. |
| pglogical's apply worker does not sufficiently validate the length of certain fields in incoming replication protocol messages before copying them, resulting in an out-of-bounds read. A party acting as the publisher for a subscription, for example a non-PostgreSQL endpoint that speaks the pglogical replication protocol, can return crafted messages that cause the subscriber's apply worker to read beyond the bounds of an allocated buffer, disclosing adjacent process memory or crashing the worker. To exploit the issue an attacker must be able to direct a subscription at an endpoint they control. In default installations this requires privileges normally reserved for a superuser, so the issue is most relevant to managed deployments where the ability to create subscriptions has been delegated to non-superuser roles. |
| KUSANAGI provided by GMO Prime Strategy Co., Ltd. contains an HTTP header injection vulnerability that may allow arbitrary HTTP headers to be injected into the HTTP response when a user accesses a specially crafted URL. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: rpl: fix hdrlen overflow in ipv6_rpl_srh_decompress()
ipv6_rpl_srh_decompress() computes:
outhdr->hdrlen = (((n + 1) * sizeof(struct in6_addr)) >> 3);
hdrlen is __u8. For n >= 127 the result exceeds 255 and silently
truncates. With n=127 (cmpri=15, cmpre=15, pad=0, hdrlen=16):
(128 * 16) >> 3 = 256, truncated to 0 as __u8
The caller in ipv6_rpl_srh_rcv() then places the compressed header
at buf + ((ohdr->hdrlen + 1) << 3). With hdrlen=0 this is buf + 8,
but the decompressed region occupies buf[0..2055] (8-byte header
plus 128 full addresses). The compressed header overlaps the
decompressed data, and ipv6_rpl_srh_compress() writes into this
overlap, corrupting the routing header of the forwarded packet.
The existing guard at exthdrs.c:546 checks (n + 1) > 255, which
prevents n+1 from overflowing unsigned char (the segments_left
field), but does not prevent the computed hdrlen from overflowing
__u8. n=127 passes because 128 <= 255, yet hdrlen=256 does not
fit.
Tighten the bound to (n + 1) > 127. This caps n at 126, giving
hdrlen = (127 * 16) >> 3 = 254, which fits in __u8. The compressed
header then lands at buf + ((254 + 1) << 3) = buf + 2040, exactly
past the decompressed region (buf[0..2039]). No overlap. 127
segments is well beyond any realistic RPL deployment. |
| The GetPaid WordPress plugin from 2.8.63 to 2.8.64 does not ensure item quantities on its payment forms are whole numbers, allowing unauthenticated users to have an invoice for a priced item marked as paid without being charged. |
| Buffer overflow in Compositing in Google Chrome prior to 157.0.8103.50 allowed a remote attacker who had compromised the renderer process to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: function: rndis: add length check for header
Add a length check for the rndis header in rndis_rm_hdr, to ensure that
MessageType, MessageLength, DataOffset, and DataLength fields are
present before they are accessed. |
| The HTTP client's debug helper print_header_field() in subsys/net/lib/http/http_client.c formatted an http_parser data-callback slice with a %s conversion: snprintk(output, len + 1, "%s", str). The parser hands its callbacks a pointer and a length into the caller's receive buffer, and those bytes are not NUL terminated. The size argument of snprintk() bounds only the destination, while the %s conversion measures the source first — lib/os/cbprintf_complete.c uses strlen() when no precision is given, and lib/os/cbprintf_nano.c uses strlen() unconditionally — so the read walks past the end of the header field and past the end of the receive buffer until it finds a zero byte.
The slice reaches the helper from on_url(), on_header_field() and on_header_value(), which the parser invokes on bytes that http_wait_data() read straight off the socket into the application-supplied recv_buf. A malicious or compromised HTTP server, or an attacker able to answer a plaintext request, therefore controls both the header field and the bytes that follow it in the buffer, and can guarantee that no zero byte appears before the buffer ends, forcing the over-read. The in-tree tests/net/lib/http_client suite reproduces the over-read under CONFIG_ASAN=y on an ordinary GET.
The impact is bounded. The whole helper body is compiled only when the HTTP client log module is explicitly set to Debug (CONFIG_NET_HTTP_LOG_LEVEL_DBG=y, which the global CONFIG_LOG_DEFAULT_LEVEL does not set), so default builds are unaffected. No out-of-bounds write occurs and none of the over-read bytes are emitted into the log, so there is no information disclosure; the consequence is an out-of-bounds read that can fault and panic the device where the buffer abuts an unmapped or MPU/MMU-protected region.
The fix copies exactly the len bytes the parser offered with memcpy() and terminates them, instead of relying on a %s conversion (a %.*s precision would not have sufficed, since cbprintf_nano.c measures the source in full before applying it). |
| Hickory-dns from 0.20.1 before 0.26.2 contains a denial of service vulnerability in the hickory-proto SVCB and HTTPS record presentation format parser, which panics on malformed alpn values. Attackers can supply untrusted zone files with unbalanced quotes, consecutive commas, or invalid escapes in alpn parameters to crash parsing processes. |