Search Results (222 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-31708 1 Linux 1 Linux Kernel 2026-10-16 8.1 High
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB read in smb2_ioctl_query_info QUERY_INFO path smb2_ioctl_query_info() has two response-copy branches: PASSTHRU_FSCTL and the default QUERY_INFO path. The QUERY_INFO branch clamps qi.input_buffer_length to the server-reported OutputBufferLength and then copies qi.input_buffer_length bytes from qi_rsp->Buffer to userspace, but it never verifies that the flexible-array payload actually fits within rsp_iov[1].iov_len. A malicious server can return OutputBufferLength larger than the actual QUERY_INFO response, causing copy_to_user() to walk past the response buffer and expose adjacent kernel heap to userspace. Guard the QUERY_INFO copy with a bounds check on the actual Buffer payload. Use struct_size(qi_rsp, Buffer, qi.input_buffer_length) rather than an open-coded addition so the guard cannot overflow on 32-bit builds.
CVE-2026-31607 1 Linux 1 Linux Kernel 2026-10-16 9.8 Critical
In the Linux kernel, the following vulnerability has been resolved: usbip: validate number_of_packets in usbip_pack_ret_submit() When a USB/IP client receives a RET_SUBMIT response, usbip_pack_ret_submit() unconditionally overwrites urb->number_of_packets from the network PDU. This value is subsequently used as the loop bound in usbip_recv_iso() and usbip_pad_iso() to iterate over urb->iso_frame_desc[], a flexible array whose size was fixed at URB allocation time based on the *original* number_of_packets from the CMD_SUBMIT. A malicious USB/IP server can set number_of_packets in the response to a value larger than what was originally submitted, causing a heap out-of-bounds write when usbip_recv_iso() writes to urb->iso_frame_desc[i] beyond the allocated region. KASAN confirmed this with kernel 7.0.0-rc5: BUG: KASAN: slab-out-of-bounds in usbip_recv_iso+0x46a/0x640 Write of size 4 at addr ffff888106351d40 by task vhci_rx/69 The buggy address is located 0 bytes to the right of allocated 320-byte region [ffff888106351c00, ffff888106351d40) The server side (stub_rx.c) and gadget side (vudc_rx.c) already validate number_of_packets in the CMD_SUBMIT path since commits c6688ef9f297 ("usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input") and b78d830f0049 ("usbip: fix vudc_rx: harden CMD_SUBMIT path to handle malicious input"). The server side validates against USBIP_MAX_ISO_PACKETS because no URB exists yet at that point. On the client side we have the original URB, so we can use the tighter bound: the response must not exceed the original number_of_packets. This mirrors the existing validation of actual_length against transfer_buffer_length in usbip_recv_xbuff(), which checks the response value against the original allocation size. Kelvin Mbogo's series ("usb: usbip: fix integer overflow in usbip_recv_iso()", v2) hardens the receive-side functions themselves; this patch complements that work by catching the bad value at its source -- in usbip_pack_ret_submit() before the overwrite -- and using the tighter per-URB allocation bound rather than the global USBIP_MAX_ISO_PACKETS limit. Fix this by checking rpdu->number_of_packets against urb->number_of_packets in usbip_pack_ret_submit() before the overwrite. On violation, clamp to zero so that usbip_recv_iso() and usbip_pad_iso() safely return early.
CVE-2026-23474 1 Linux 1 Linux Kernel 2026-10-15 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: mtd: Avoid boot crash in RedBoot partition table parser Given CONFIG_FORTIFY_SOURCE=y and a recent compiler, commit 439a1bcac648 ("fortify: Use __builtin_dynamic_object_size() when available") produces the warning below and an oops. Searching for RedBoot partition table in 50000000.flash at offset 0x7e0000 ------------[ cut here ]------------ WARNING: lib/string_helpers.c:1035 at 0xc029e04c, CPU#0: swapper/0/1 memcmp: detected buffer overflow: 15 byte read of buffer size 14 Modules linked in: CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.19.0 #1 NONE As Kees said, "'names' is pointing to the final 'namelen' many bytes of the allocation ... 'namelen' could be basically any length at all. This fortify warning looks legit to me -- this code used to be reading beyond the end of the allocation." Since the size of the dynamic allocation is calculated with strlen() we can use strcmp() instead of memcmp() and remain within bounds.
CVE-2023-52464 2 Linux, Redhat 2 Linux Kernel, Enterprise Linux 2026-10-15 7.8 High
In the Linux kernel, the following vulnerability has been resolved: EDAC/thunderx: Fix possible out-of-bounds string access Enabling -Wstringop-overflow globally exposes a warning for a common bug in the usage of strncat(): drivers/edac/thunderx_edac.c: In function 'thunderx_ocx_com_threaded_isr': drivers/edac/thunderx_edac.c:1136:17: error: 'strncat' specified bound 1024 equals destination size [-Werror=stringop-overflow=] 1136 | strncat(msg, other, OCX_MESSAGE_SIZE); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ... 1145 | strncat(msg, other, OCX_MESSAGE_SIZE); ... 1150 | strncat(msg, other, OCX_MESSAGE_SIZE); ... Apparently the author of this driver expected strncat() to behave the way that strlcat() does, which uses the size of the destination buffer as its third argument rather than the length of the source buffer. The result is that there is no check on the size of the allocated buffer. Change it to strlcat(). [ bp: Trim compiler output, fixup commit message. ]
CVE-2026-64039 1 Linux 1 Linux Kernel 2026-10-13 7.7 High
In the Linux kernel, the following vulnerability has been resolved: drm/msm/snapshot: fix dumping of the unaligned regions The snapshotting code internally aligns data segment to 16 bytes. This works fine for DPU code (where most of the regions are aligned), but fails for snapshotting of the DSI data (because DSI data region is shifted by 4 bytes). Fix the code by removing length alignment and by accurately printing last registers in the region. While reworking the code also fix the 16x memory overallocation in msm_disp_state_dump_regs(). Patchwork: https://patchwork.freedesktop.org/patch/725449/
CVE-2026-97612 1 Linux 1 Linux Kernel 2026-10-03 7.8 High
In the Linux kernel, the following vulnerability has been resolved: net: mpls: clear inner_protocol when the last label is popped skb_mpls_push() records the pre-encapsulation network header once, gated on !skb->inner_protocol. skb_mpls_pop() never clears that record, so it outlives the encapsulation it describes. Open vSwitch can then re-push MPLS onto a packet whose inner_network_header still points at the older, deeper offset: push a label, pop every label, recirculate (ovs_flow_key_update() re-derives key->eth.type and resets network_header, but leaves inner_*), then push again. ovs_fragment() trusts the record: skb->network_header = skb->inner_network_header; so skb_network_offset() goes negative. The bound check is signed: if (skb_network_offset(skb) > MAX_L2_LEN) a negative offset passes it, and prepare_frag() widens the value: unsigned int hlen = skb_network_offset(skb); memcpy(&data->l2_data, skb->data, hlen); which is a ~4GiB memcpy out of a 30-byte per-CPU buffer. Reproduced on v7.3-rc1. RDX is the truncated length, (unsigned int)(-8): BUG: unable to handle page fault for address: ffffe8ffffc16000 #PF: supervisor write access in kernel mode Oops: 0002 [#1] SMP KASAN NOPTI RIP: 0010:memcpy+0x8/0x20 RDX: 00000000fffffff8 RSI: ffff888105d732db RDI: ffffe8ffffc16000 prepare_frag+0x3df/0x4e0 ovs_fragment+0x589/0x7e0 do_output+0x4ce/0x5e0 do_execute_actions+0x55d2/0x7b30 ovs_execute_actions+0xea/0x450 Same root-cause shape as commit 975b5b067f52 ("ipv6: sr: restore network header before routing and forwarding"): a stale network header offset reaching a consumer that widens it. Here it originates in the MPLS push/pop path. Clear inner_protocol once the packet is no longer MPLS, so a later push re-records the current header. net/sched/act_mpls.c is the only other skb_mpls_pop() caller and gets the same fix; sch_frag.c saves and restores inner_protocol around fragmentation in the same way OVS does.
CVE-2026-93287 1 Linux 1 Linux Kernel 2026-10-03 7.8 High
In the Linux kernel, the following vulnerability has been resolved: i2c: smbus: reject oversized block transfers in the common path The SMBus block transfer length data->block[0] is validated in i2c_smbus_xfer_emulated() but that check runs too late for tracepoints and is skipped entirely when the adapter provides a native smbus_xfer implementation. This allows user-controlled oversized block lengths to reach tracepoint memcpy calls and driver callbacks unchecked. Add an early validation in __i2c_smbus_xfer() that rejects block transfers whose caller-supplied length is zero or exceeds I2C_SMBUS_BLOCK_MAX before any tracepoint fires or driver callback runs. data->block[0] is filled in by the device on SMBus block reads, so the check is scoped to operations where the length is actually supplied by the caller. This is consistent with the existing -EINVAL convention in the emulated path and protects all downstream consumers at once: the smbus_write tracepoint, all native smbus_xfer driver implementations, and the emulated path. Two distinct bugs are fixed by this change: Bug 1: smbus_write tracepoint OOB (include/trace/events/smbus.h) trace_smbus_write() fires before any validation and copies data->block[0]+1 bytes into a 34-byte event buffer. With block[0]=0xfe the tracepoint copies 255 bytes, overflowing by 221. BUG: KASAN: stack-out-of-bounds in trace_event_raw_event_smbus_write+0x27c/0x530 Read of size 255 at addr ffff88800d98fcf8 by task poc_smbus/91 Call Trace: <TASK> __asan_memcpy+0x23/0x80 trace_event_raw_event_smbus_write+0x27c/0x530 __i2c_smbus_xfer+0x43a/0xa40 i2c_smbus_xfer+0x19e/0x340 i2cdev_ioctl_smbus+0x38f/0x7f0 i2cdev_ioctl+0x35e/0x680 __x64_sys_ioctl+0x147/0x1e0 do_syscall_64+0xcf/0x15a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Bug 2: i2c-stub I2C_SMBUS_I2C_BLOCK_DATA OOB (drivers/i2c/i2c-stub.c) stub_xfer() implements .smbus_xfer directly and only clamps block[0] against 256-command, not I2C_SMBUS_BLOCK_MAX. With block[0]=0xff and command=0 the loop accesses block[1+i] for i up to 254, far past the 34-byte union. UBSAN: array-index-out-of-bounds in drivers/i2c/i2c-stub.c:223:44 index 34 is out of range for type '__u8 [34]' Call Trace: <TASK> __ubsan_handle_out_of_bounds+0xd7/0x120 stub_xfer+0x1971/0x198f [i2c_stub] __i2c_smbus_xfer+0x306/0xa40 i2c_smbus_xfer+0x19e/0x340 i2cdev_ioctl_smbus+0x38f/0x7f0 i2cdev_ioctl+0x35e/0x680 __x64_sys_ioctl+0x147/0x1e0 do_syscall_64+0xcf/0x15a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Both traces reproduced on v7.0-rc6+i2c/for-current with KASAN+UBSAN.
CVE-2025-20315 1 Cisco 2 Ios Xe, Ios Xe Software 2026-09-28 8.6 High
A vulnerability in the Network-Based Application Recognition (NBAR) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, causing a denial of service (DoS) condition. This vulnerability is due to improper handling of malformed Control and Provisioning of Wireless Access Points (CAPWAP) packets. An attacker could exploit this vulnerability by sending malformed CAPWAP packets through an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition.
CVE-2026-20290 1 Cisco 1 Secure Firewall Threat Defense 2026-09-18 5.8 Medium
A vulnerability in SSL/TLS certificate parsing in the Snort 2 Detection Engine of Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the Snort 2 Detection Engine to restart. This vulnerability is due to incomplete validation of the SSL certificate. An attacker could exploit this vulnerability by sending a crafted SSL connection setup request to be parsed by Snort 2. A successful exploit could allow the attacker to cause the Snort 2 Detection Engine to restart unexpectedly, resulting in a denial of service (DoS) condition.
CVE-2026-90804 1 Gnu 1 Binutils 2026-09-18 4.8 Medium
A vulnerability was detected in GNU Binutils 2.47. Affected by this issue is the function _bfd_elf_write_section_eh_frame of the file bfd/elf-eh-frame.c of the component Eh Frame Section Handler. Performing a manipulation of the argument cie_length/fde_length/augmentation_data_size/write_offset results in buffer overflow. Attacking locally is a requirement. The exploit is now public and may be used. The project was informed of the problem early through a bug report but has not responded yet.
CVE-2026-90803 1 Gnu 1 Binutils 2026-09-18 5.3 Medium
A security vulnerability has been detected in GNU Binutils 2.47. Affected by this vulnerability is the function elf_x86_64_relocate_section of the file bfd/elf64-x86-64.c of the component ld. Such manipulation of the argument roff leads to buffer overflow. An attack has to be approached locally. The exploit has been disclosed publicly and may be used. Upgrading to version 2.48 addresses this issue. The name of the patch is 471130b39c03623ec6d78ece377ff4da3f6bfe7b. It is recommended to upgrade the affected component.
CVE-2026-44893 1 Netty 1 Netty 2026-09-18 7.5 High
Netty is a network application framework for development of protocol servers and clients. In netty-codec-haproxy prior to versions 4.1.135.Final and 4.2.15.Final, when decoding a PP2_TYPE_SSL TLV, HAProxyMessage.readNextTLV() first calls `header.retainedSlice(header.readerIndex(), length)` and only then reads the 1-byte client field and 4-byte verify field. If the attacker sets the TLV length below 5, the subsequent readByte/readInt throws IndexOutOfBoundsException. HAProxyMessageDecoder only catches HAProxyProtocolException around this call, so the IOOBE propagates and the retained slice on the pooled cumulation buffer is never released. Versions 4.1.135.Final and 4.2.15.Final patch the issue.
CVE-2026-77412 1 Rabbitmq 1 Amqp091-go 2026-09-18 7.5 High
RabbitMQ amqp091-go is a Go AMQP 0.9.1 client. Prior to 1.13.0, readField in read.go reads the length of an AMQP byte-array field with type tag x into a signed int32 and passes the value directly to make when allocating the field buffer. A malicious or compromised broker can encode a value such as 0xFFFFFFFF, which becomes -1 and causes a len out of range runtime panic. The panic escapes the network reader goroutine and terminates the client process, including during connection.start server properties or message header table parsing. This issue is fixed in version 1.13.0.
CVE-2026-86142 1 Xmlsoft 1 Libxml2 2026-09-14 6.9 Medium
In libxml2 before 2.15.4, there is a heap-based buffer overflow in xmlXPtrEvalXPtrPart because of xmlXPtrEval xpointer length saturation.
CVE-2026-89674 1 Linux 1 Linux Kernel 2026-09-14 9.8 Critical
In the Linux kernel, the following vulnerability has been resolved: nfsd: fix XDR length calculation in nfsd4_ff_encode_layoutget The XDR buffer size calculation in nfsd4_ff_encode_layoutget() has multiple errors that can result in either an out-of-bounds write or leaking uninitialized kernel memory to the client: - fh_len doesn't account for XDR padding on the file handle data - uid and gid lengths use "8 + len" but xdr_encode_opaque() actually writes "4 + xdr_align_size(len)" bytes - ds_len omits the flags and stats_collect_hint fields (8 bytes), while len's header constant overestimates by 8 bytes -- these partially cancel but leave a net mismatch The worst case occurs with short strings (e.g. uid=0, gid=0 with an odd-sized file handle), where the function writes up to 5 bytes past the reserved XDR buffer. Conversely, when string lengths happen to be 4-byte aligned, the reservation is too large and stale buffer content is sent to the client. Fix this by breaking out every encoded field explicitly in the ds_len calculation, using xdr_align_size() for all variable-length opaque fields, and correcting the header constants.
CVE-2026-89628 1 Linux 1 Linux Kernel 2026-09-14 5.4 Medium
In the Linux kernel, the following vulnerability has been resolved: HID: picolcd: clamp eeprom debugfs read to bytes actually received picolcd_debug_eeprom_read() trusts resp->raw_data[2] -- a length byte supplied by the device in its REPORT_EE_DATA reply -- clamped only to the caller's read() count: ret = resp->raw_data[2]; if (ret > s) ret = s; if (copy_to_user(u, resp->raw_data+3, ret)) It never checks resp->raw_size, the number of bytes picolcd_raw_event() actually copied into the 64-byte raw_data[] of the kmalloc'd struct picolcd_pending. A device (or a spoofed picoLCD) returning a length byte of 0xff, read with a count >= 255, makes copy_to_user() read past raw_data[] into adjacent slab memory and return it to userspace through the debugfs "eeprom" file: BUG: KASAN: slab-out-of-bounds in _copy_to_user Read of size 255 ... picolcd_debug_eeprom_read+0x214/0x2f0 [hid_picolcd] The debug-dump path in the same file already validates the device length byte against the received size before trusting it; this read does not. The file is created S_IRUSR (root-only) and a crafted device is needed, so it is neither unprivileged- nor remotely-triggerable. Clamp the copy length to resp->raw_size - 3 (the payload actually received, minus the 3-byte header), floored at 0 for short replies.
CVE-2026-80965 1 Linux 1 Linux Kernel 2026-09-14 4.1 Medium
In the Linux kernel, the following vulnerability has been resolved: ALSA: serial-u16550: Check card index validity at probe serial-u16550 driver blindly trusts that the given devptr->id value is within the proper card index range at probe. It's OK for the devices the driver itself creates at the module probe time, but if the device is bound manually via sysfs interface, this could be -1 as "none", and this leads to OOB access for index[] and other parameters. Add a sanity check for the card index and warn/correct it if it's a value out of the range.
CVE-2026-89728 1 Linux 1 Linux Kernel 2026-09-12 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: i3c: renesas: Fix out-of-bounds access for newdevs mask When software initiates DAA (Dynamic Address Assignment), the controller reports the result via the NRSPQP (Normal Response Queue Port Register). The data length field of the response descriptor, which is accessible through the NRSPQP register, indicates the number of devices remaining after DAA. Consequently, when the bus is empty, this field contains the maximum number of devices supported by the controller (8 for the Renesas I3C controller). Adjust the condition that computes the newly discovered devices bitmask to prevent an out-of-bounds when the I3C bus is empty.
CVE-2026-59985 2026-09-09 5.5 Medium
OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. OpenEXR versions 3.2.0 through 3.2.10, 3.3.0 through 3.3.12, and 3.4.0 through 3.4.13 are vulnerable on ILP32 builds to a heap out-of-bounds read. The issue occurs when a crafted RLE-compressed EXR causes the 64-bit unpacked size to truncate before allocation in OpenEXRCore decoding.c and unpack_32bit() reads beyond the resulting buffer, allowing denial of service. This issue is fixed in versions 3.2.11, 3.3.13, and 3.4.14.
CVE-2026-41035 1 Samba 1 Rsync 2026-09-04 7.4 High
In rsync 3.0.1 through 3.4.1, receive_xattr relies on an untrusted length value during a qsort call, leading to a receiver use-after-free. The victim must run rsync with -X (aka --xattrs). On Linux, many (but not all) common configurations are vulnerable. Non-Linux platforms are more widely vulnerable.