Search Results (9077 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-115269 1 Mtrudel 1 Bandit 2026-10-26 N/A
Allocation of Resources Without Limits or Throttling vulnerability in the HTTP/2 request body reader of mtrudel bandit allows an unauthenticated remote attacker to hold stream processes open indefinitely via WINDOW_UPDATE or empty SETTINGS frames sent while a Plug reads the request body. Bandit.HTTP2.Stream.do_read_data/4 in lib/bandit/http2/stream.ex waits for each frame with a fresh read_timeout. A stream WINDOW_UPDATE, or the zero-delta window update that every empty SETTINGS frame delivers to all streams, ends the wait without delivering any body data, and the loop starts a new full countdown. A client that sends one of these 9-byte frames before each countdown expires keeps read_body blocked, together with the stream process and whatever the application holds while reading, for as long as it likes. This issue affects bandit: from 1.4.0 before 1.14.0.
CVE-2026-114213 1 Mtrudel 1 Bandit 2026-10-26 N/A
Allocation of Resources Without Limits or Throttling vulnerability in the WebSocket fragment reassembly of mtrudel bandit allows an unauthenticated remote attacker to exhaust server memory via a fragmented message made of many 1-byte continuation frames. Bandit.WebSocket.Connection checks max_fragmented_message_size against the payload bytes received, but keeps every non-final continuation frame as a new list cell around its own binary, and nothing limits the number of fragments. A 1-byte fragment costs 7 bytes on the wire but about 150 to 170 bytes of server memory, so one connection can hold about 150 times the configured limit, roughly 1.2 to 1.4 GB at the default 8 MB. Ping frames between fragments keep the connection alive past the idle timeout. This issue affects bandit: from 1.11.0 before 1.14.0.
CVE-2026-111101 1 Mtrudel 1 Bandit 2026-10-26 N/A
Allocation of Resources Without Limits or Throttling vulnerability in the HTTP/1.1 chunked body reader of mtrudel bandit allows an unauthenticated remote attacker to exhaust server memory and CPU via a request body made of many 1-byte chunks. The chunked reader in lib/bandit/http1/socket.ex keeps every chunk as its own list cell and binary term until IO.iodata_to_binary/1 joins them, and nothing limits the number of chunks. The :length option of read_body/2 counts only data bytes, so tiny chunks cost far more memory than their payload: 48 MB of 1-byte chunks grew one handler process to about 500 MB and took about 6 s of CPU. The route does not need to read the body, because on keep-alive connections ensure_completed/1 drains unread bodies through the same reader. This issue affects bandit: from 0.1.0 before 1.14.0.
CVE-2026-110499 1 Mtrudel 1 Bandit 2026-10-26 N/A
Allocation of Resources Without Limits or Throttling vulnerability in the HTTP/2 implementation of mtrudel bandit allows an unauthenticated remote attacker to grow per-connection memory and CPU cost without bound via a large SETTINGS_HEADER_TABLE_SIZE. Bandit resizes its HPACK encoder table to whatever size the client advertises, up to 2^32-1 bytes, and indexes response headers into it. Because responses carry distinct values such as date or content-length, nothing is evicted and the table grows with every response for the life of the connection, while each lookup scans it linearly. The SETTINGS handling in Bandit.HTTP2.Connection (lib/bandit/http2/connection.ex) passes remote_settings.header_table_size to HPAX.resize/2 with no server-side cap, and encode_headers encodes every response header as :store. Serving N responses on one connection therefore costs O(N²) CPU in the connection process. This issue affects bandit: from 0.3.6 before 1.14.0.
CVE-2026-108525 1 Mtrudel 1 Bandit 2026-10-26 N/A
Allocation of Resources Without Limits or Throttling vulnerability in the HTTP/2 implementation of mtrudel bandit allows an unauthenticated remote attacker to exhaust server memory via DATA frames sent past the advertised receive window. The attacker requests a response larger than the 65,535-byte initial window and withholds WINDOW_UPDATE, so the stream process blocks while sending and stops reading, then floods small DATA frames on that stream. Every frame is queued in the stream's mailbox until the BEAM node runs out of memory. Bandit.HTTP2.Connection.handle_frame/3 in lib/bandit/http2/connection.ex forwards each DATA frame to the stream process without consulting the receive window, and Bandit.HTTP2.FlowControl.compute_recv_window/2 replenishes the window as data arrives rather than as it is consumed, and never answers a violation with FLOW_CONTROL_ERROR. This issue affects bandit: from 0.3.1 before 1.14.0.
CVE-2026-105134 1 Ahsay 2 Ahsaycbs, Cloud Backup Suite 2026-10-26 10 Critical
A flaw has been found in Ahsay AhsayCBS up to 9.15.2.69/10.3.4.44. This vulnerability affects unknown code of the file /rps/api/json/UpdateReceivers.do of the component Replication Receiver. Executing a manipulation of the argument random can lead to os command injection. It is possible to launch the attack remotely. The exploit has been published and may be used. Upgrading to version 9.15.2.70 and 10.3.4.45 is able to resolve this issue. Upgrading the affected component is advised. The initial patch did not fix the security vulnerability properly. An update of the CVE entry to reflect this became necessary.
CVE-2026-74757 1 Apache 1 Brpc 2026-10-26 7.5 High
Uncontrolled resource allocation in the mcpack2pb component in Apache bRPC (version < 1.18.0) on all platforms allows remote attackers to make the server allocate a large amount of memory via sending a crafted mcpack request with a huge array item count. Root Cause: The bRPC mcpack2pb parser trusts the item count stored in the mcpack array header without validating it against the actual payload size. The code generated by the mcpack2pb protoc plugin uses this count to preallocate memory for repeated protobuf fields via Reserve(). A malformed request declaring item_count = 0x7fffffff can force the server to preallocate about 16GB of virtual memory, which may abort the process (SIGABRT) on memory-constrained hosts. Affected Scenarios: Use a bRPC server that wires a NsheadService to UbrpcMcpack2Adaptor (the Baidu ubrpc deployment pattern) and parses requests with code generated by the mcpack2pb protoc plugin. The request body is parsed before authentication. How to Fix: (Choose one of the following options) 1. Upgrade bRPC to version 1.18.0, which fixes this issue. 2. Apply this patch: https://github.com/apache/brpc/pull/3451 Note: No matter which option you choose, you should know that the fix caps the array item count to the remaining bytes of the array payload.
CVE-2026-98878 1 Linux 2 Linux, Linux Kernel 2026-10-26 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v5: Immediately exec priority drop following activate With GICv5 an interrupt of equal or lower priority cannot be signalled until there has been a priority drop. This is done via the GIC CDEOI system instruction. Once this has been executed, the hardware is able to signal the next interrupt if there is one. As all interrupts are programmed to have the same priority, no new interrupts can be signalled until the priority drop has happened. This can cause issues when, for example, an interrupt remains active while a long running process takes place, such as when injecting a physical interrupt into a guest VM in software. The GICv5 driver has so far done the priority drop as part of irq_eoi(), i.e., at the same time as deactivating the interrupt. This means that any long running process (or VM) could block incoming interrupts, effectively causing a denial of service for all other interrupts. Rather than doing the EOI as part of irq_eoi() (which the name would suggest would be a good place for it), move it to happen immediately after acknowledging an interrupt in the main GICv5 interrupt handler. The deactivation of interrupts (GIC CDDI) remains implemented as part of irq_eoi(), which means that the same interrupt cannot be signalled a second time until deactivated by software.
CVE-2020-37268 1 Rocq-prover 1 Rocq 2026-10-26 6.3 Medium
Print Assumptions does not report that a definition was produced while universe checking was disabled when that definition reaches the caller through Parameter Inline in a module type. Applying a functor inlines the body of the parameter, and the inlining drops the record that the term was built under Unset Universe Checking, so the resulting constant carries no trace of the unsafe operation. A module implementation can therefore prove False using a universe inconsistency, expose it through an inlined parameter, and have Print Assumptions report the dependent proof as closed under the global context. Because Print Assumptions is the in-process audit used to confirm that a development rests on no unexpected assumptions, a dependency built this way passes that audit while proving arbitrary propositions. The standalone checker coqchk does reject the resulting compiled file. The project records this in dev/doc/critical-bugs.md under non-fixed bugs and rates the risk as moderate when coqchk is not used.
CVE-2026-34513 2 Aio-libs, Aiohttp 2 Aiohttp, Aiohttp 2026-10-25 7.5 High
AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to version 3.13.4, an unbounded DNS cache could result in excessive memory usage possibly resulting in a DoS situation. This issue has been patched in version 3.13.4.
CVE-2026-48525 2 Jpadilla, Pyjwt Project 2 Pyjwt, Pyjwt 2026-10-25 5.3 Medium
PyJWT is a JSON Web Token implementation in Python. From 2.8.0 to 2.12.1, when verifying detached JWS tokens using the unencoded-payload option ("b64": false, RFC 7797), PyJWT performs Base64URL decoding of the compact-serialization payload segment before enforcing the detached-payload rules. For b64=false, PyJWT later discards that decoded payload and replaces it with the caller-provided detached_payload. In practice, this turns the middle segment into an attacker-controlled “work amplifier”: a remote client can supply an arbitrarily large Base64URL payload segment that forces CPU work + memory allocations even if the signature is invalid. This creates an unauthenticated DoS vector against any endpoint that verifies detached JWS using PyJWT. This vulnerability is fixed in 2.13.0.
CVE-2020-15874 1 Librenms 1 Librenms 2026-10-25 8.8 High
An issue was discovered in LibreNMS 1.65. A remote authenticated attacker with normal privileges can execute arbitrary shell commands through a command injection in the /graph.php API endpoint.
CVE-2026-26793 1 Gl-inet 3 Ar300m16, Ar300m16 Firmware, Gl-ar300m16 2026-10-25 9.8 Critical
GL-iNet GL-AR300M16 v4.3.11 was discovered to contain a command injection vulnerability via the set_config function. This vulnerability allows attackers to execute arbitrary commands via a crafted input.
CVE-2026-4253 1 Tenda 2 Ac8, Ac8 Firmware 2026-10-25 4.7 Medium
A security flaw has been discovered in Tenda AC8 16.03.50.11. This affects the function route_set_user_policy_rule of the file /cgi-bin/UploadCfg of the component Web Interface. The manipulation of the argument wans.policy.list1 results in os command injection. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks.
CVE-2026-9563 1 Eclipse 1 Parsson 2026-10-25 7.5 High
In Eclipse Parsson published Maven Central artifacts before version 1.1.8, the JSON parser did not enforce a default maximum on the number of characters consumed while parsing a single JSON document. Applications that parse attacker- controlled JSON can be forced to consume excessive CPU and memory by processing very large documents, including large arrays, objects, strings, numbers, whitespace, or nested structures, resulting in a denial of service. Eclipse Parsson 1.1.8 introduces a configurable maximum parsing limit with a default limit of 15 million parser-consumed characters.
CVE-2026-9388 1 Totolink 2 A8000ru, A8000ru Firmware 2026-10-25 9.8 Critical
A weakness has been identified in Totolink A8000RU 7.1cu.643_b20200521. The impacted element is the function setScheduleCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Executing a manipulation of the argument mode can lead to os command injection. It is possible to launch the attack remotely. The exploit has been made available to the public and could be used for attacks.
CVE-2026-9475 1 Totolink 2 A8000ru, A8000ru Firmware 2026-10-25 9.8 Critical
A vulnerability was determined in Totolink A8000RU 7.1cu.643_b20200521. This affects the function setIpQosRules of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. This manipulation of the argument Comment causes os command injection. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized.
CVE-2026-9405 1 Totolink 2 A8000ru, A8000ru Firmware 2026-10-25 9.8 Critical
A security flaw has been discovered in Totolink A8000RU 7.1cu.643_b20200521. This impacts the function setGameSpeedCfg of the file /cgi-bin/cstecgi.cgi of the component Web Management Interface. Performing a manipulation of the argument enable results in os command injection. Remote exploitation of the attack is possible. The exploit has been released to the public and may be used for attacks.
CVE-2026-36983 1 Dlink 2 Dcs-932l, Dcs-932l Firmware 2026-10-25 7.3 High
D-Link DCS-932L v2.18.01 is vulnerable to Command Injection in the function sub_42EF14 of the file /bin/alphapd. The manipulation of the argument LightSensorControl leads to command injection.
CVE-2026-26791 1 Gl-inet 3 Ar300m16, Ar300m16 Firmware, Gl-ar300m16 2026-10-25 9.8 Critical
GL-iNet GL-AR300M16 v4.3.11 was discovered to contain a command injection vulnerability via the string port parameter in the enable_echo_server function. This vulnerability allows attackers to execute arbitrary commands via a crafted input.