| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
x86/lam: Disable ADDRESS_MASKING in most cases
Linear Address Masking (LAM) has a weakness related to transient
execution as described in the SLAM paper[1]. Unless Linear Address
Space Separation (LASS) is enabled this weakness may be exploitable.
Until kernel adds support for LASS[2], only allow LAM for COMPILE_TEST,
or when speculation mitigations have been disabled at compile time,
otherwise keep LAM disabled.
There are no processors in market that support LAM yet, so currently
nobody is affected by this issue.
[1] SLAM: https://download.vusec.net/papers/slam_sp24.pdf
[2] LASS: https://lore.kernel.org/lkml/20230609183632.48706-1-alexander.shishkin@linux.intel.com/
[ dhansen: update SPECULATION_MITIGATIONS -> CPU_MITIGATIONS ] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: Set correct chandef when starting CAC
When starting CAC in a mode other than AP mode, it return a
"WARNING: CPU: 0 PID: 63 at cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211]"
caused by the chandef.chan being null at the end of CAC.
Solution: Ensure the channel definition is set for the different modes
when starting CAC to avoid getting a NULL 'chan' at the end of CAC.
Call Trace:
? show_regs.part.0+0x14/0x16
? __warn+0x67/0xc0
? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211]
? report_bug+0xa7/0x130
? exc_overflow+0x30/0x30
? handle_bug+0x27/0x50
? exc_invalid_op+0x18/0x60
? handle_exception+0xf6/0xf6
? exc_overflow+0x30/0x30
? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211]
? exc_overflow+0x30/0x30
? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211]
? regulatory_propagate_dfs_state.cold+0x1b/0x4c [cfg80211]
? cfg80211_propagate_cac_done_wk+0x1a/0x30 [cfg80211]
? process_one_work+0x165/0x280
? worker_thread+0x120/0x3f0
? kthread+0xc2/0xf0
? process_one_work+0x280/0x280
? kthread_complete_and_exit+0x20/0x20
? ret_from_fork+0x19/0x24
[shorten subject, remove OCB, reorder cases to match previous list] |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: PAD: fix crash in exit_round_robin()
The kernel occasionally crashes in cpumask_clear_cpu(), which is called
within exit_round_robin(), because when executing clear_bit(nr, addr) with
nr set to 0xffffffff, the address calculation may cause misalignment within
the memory, leading to access to an invalid memory address.
----------
BUG: unable to handle kernel paging request at ffffffffe0740618
...
CPU: 3 PID: 2919323 Comm: acpi_pad/14 Kdump: loaded Tainted: G OE X --------- - - 4.18.0-425.19.2.el8_7.x86_64 #1
...
RIP: 0010:power_saving_thread+0x313/0x411 [acpi_pad]
Code: 89 cd 48 89 d3 eb d1 48 c7 c7 55 70 72 c0 e8 64 86 b0 e4 c6 05 0d a1 02 00 01 e9 bc fd ff ff 45 89 e4 42 8b 04 a5 20 82 72 c0 <f0> 48 0f b3 05 f4 9c 01 00 42 c7 04 a5 20 82 72 c0 ff ff ff ff 31
RSP: 0018:ff72a5d51fa77ec8 EFLAGS: 00010202
RAX: 00000000ffffffff RBX: ff462981e5d8cb80 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246
RBP: ff46297556959d80 R08: 0000000000000382 R09: ff46297c8d0f38d8
R10: 0000000000000000 R11: 0000000000000001 R12: 000000000000000e
R13: 0000000000000000 R14: ffffffffffffffff R15: 000000000000000e
FS: 0000000000000000(0000) GS:ff46297a800c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffe0740618 CR3: 0000007e20410004 CR4: 0000000000771ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
? acpi_pad_add+0x120/0x120 [acpi_pad]
kthread+0x10b/0x130
? set_kthread_struct+0x50/0x50
ret_from_fork+0x1f/0x40
...
CR2: ffffffffe0740618
crash> dis -lr ffffffffc0726923
...
/usr/src/debug/kernel-4.18.0-425.19.2.el8_7/linux-4.18.0-425.19.2.el8_7.x86_64/./include/linux/cpumask.h: 114
0xffffffffc0726918 <power_saving_thread+776>: mov %r12d,%r12d
/usr/src/debug/kernel-4.18.0-425.19.2.el8_7/linux-4.18.0-425.19.2.el8_7.x86_64/./include/linux/cpumask.h: 325
0xffffffffc072691b <power_saving_thread+779>: mov -0x3f8d7de0(,%r12,4),%eax
/usr/src/debug/kernel-4.18.0-425.19.2.el8_7/linux-4.18.0-425.19.2.el8_7.x86_64/./arch/x86/include/asm/bitops.h: 80
0xffffffffc0726923 <power_saving_thread+787>: lock btr %rax,0x19cf4(%rip) # 0xffffffffc0740620 <pad_busy_cpus_bits>
crash> px tsk_in_cpu[14]
$66 = 0xffffffff
crash> px 0xffffffffc072692c+0x19cf4
$99 = 0xffffffffc0740620
crash> sym 0xffffffffc0740620
ffffffffc0740620 (b) pad_busy_cpus_bits [acpi_pad]
crash> px pad_busy_cpus_bits[0]
$42 = 0xfffc0
----------
To fix this, ensure that tsk_in_cpu[tsk_index] != -1 before calling
cpumask_clear_cpu() in exit_round_robin(), just as it is done in
round_robin_cpu().
[ rjw: Subject edit, avoid updates to the same value ] |
| In the Linux kernel, the following vulnerability has been resolved:
x86/ioapic: Handle allocation failures gracefully
Breno observed panics when using failslab under certain conditions during
runtime:
can not alloc irq_pin_list (-1,0,20)
Kernel panic - not syncing: IO-APIC: failed to add irq-pin. Can not proceed
panic+0x4e9/0x590
mp_irqdomain_alloc+0x9ab/0xa80
irq_domain_alloc_irqs_locked+0x25d/0x8d0
__irq_domain_alloc_irqs+0x80/0x110
mp_map_pin_to_irq+0x645/0x890
acpi_register_gsi_ioapic+0xe6/0x150
hpet_open+0x313/0x480
That's a pointless panic which is a leftover of the historic IO/APIC code
which panic'ed during early boot when the interrupt allocation failed.
The only place which might justify panic is the PIT/HPET timer_check() code
which tries to figure out whether the timer interrupt is delivered through
the IO/APIC. But that code does not require to handle interrupt allocation
failures. If the interrupt cannot be allocated then timer delivery fails
and it either panics due to that or falls back to legacy mode.
Cure this by removing the panic wrapper around __add_pin_to_irq_node() and
making mp_irqdomain_alloc() aware of the failure condition and handle it as
any other failure in this function gracefully. |
| In the Linux kernel, the following vulnerability has been resolved:
efistub/tpm: Use ACPI reclaim memory for event log to avoid corruption
The TPM event log table is a Linux specific construct, where the data
produced by the GetEventLog() boot service is cached in memory, and
passed on to the OS using an EFI configuration table.
The use of EFI_LOADER_DATA here results in the region being left
unreserved in the E820 memory map constructed by the EFI stub, and this
is the memory description that is passed on to the incoming kernel by
kexec, which is therefore unaware that the region should be reserved.
Even though the utility of the TPM2 event log after a kexec is
questionable, any corruption might send the parsing code off into the
weeds and crash the kernel. So let's use EFI_ACPI_RECLAIM_MEMORY
instead, which is always treated as reserved by the E820 conversion
logic. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: pause TCM when the firmware is stopped
Not doing so will make us send a host command to the transport while the
firmware is not alive, which will trigger a WARNING.
bad state = 0
WARNING: CPU: 2 PID: 17434 at drivers/net/wireless/intel/iwlwifi/iwl-trans.c:115 iwl_trans_send_cmd+0x1cb/0x1e0 [iwlwifi]
RIP: 0010:iwl_trans_send_cmd+0x1cb/0x1e0 [iwlwifi]
Call Trace:
<TASK>
iwl_mvm_send_cmd+0x40/0xc0 [iwlmvm]
iwl_mvm_config_scan+0x198/0x260 [iwlmvm]
iwl_mvm_recalc_tcm+0x730/0x11d0 [iwlmvm]
iwl_mvm_tcm_work+0x1d/0x30 [iwlmvm]
process_one_work+0x29e/0x640
worker_thread+0x2df/0x690
? rescuer_thread+0x540/0x540
kthread+0x192/0x1e0
? set_kthread_struct+0x90/0x90
ret_from_fork+0x22/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't BUG_ON on ENOMEM from btrfs_lookup_extent_info() in walk_down_proc()
We handle errors here properly, ENOMEM isn't fatal, return the error. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: clean up our handling of refs == 0 in snapshot delete
In reada we BUG_ON(refs == 0), which could be unkind since we aren't
holding a lock on the extent leaf and thus could get a transient
incorrect answer. In walk_down_proc we also BUG_ON(refs == 0), which
could happen if we have extent tree corruption. Change that to return
-EUCLEAN. In do_walk_down() we catch this case and handle it correctly,
however we return -EIO, which -EUCLEAN is a more appropriate error code.
Finally in walk_up_proc we have the same BUG_ON(refs == 0), so convert
that to proper error handling. Also adjust the error message so we can
actually do something with the information. |
| In the Linux kernel, the following vulnerability has been resolved:
MIPS: cevt-r4k: Don't call get_c0_compare_int if timer irq is installed
This avoids warning:
[ 0.118053] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283
Caused by get_c0_compare_int on secondary CPU.
We also skipped saving IRQ number to struct clock_event_device *cd as
it's never used by clockevent core, as per comments it's only meant
for "non CPU local devices". |
| In the Linux kernel, the following vulnerability has been resolved:
ELF: fix kernel.randomize_va_space double read
ELF loader uses "randomize_va_space" twice. It is sysctl and can change
at any moment, so 2 loads could see 2 different values in theory with
unpredictable consequences.
Issue exactly one load for consistent value across one exec. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: use IWL_FW_CHECK for link ID check
The lookup function iwl_mvm_rcu_fw_link_id_to_link_conf() is
normally called with input from the firmware, so it should use
IWL_FW_CHECK() instead of WARN_ON(). |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: core: Prevent USB core invalid event buffer address access
This commit addresses an issue where the USB core could access an
invalid event buffer address during runtime suspend, potentially causing
SMMU faults and other memory issues in Exynos platforms. The problem
arises from the following sequence.
1. In dwc3_gadget_suspend, there is a chance of a timeout when
moving the USB core to the halt state after clearing the
run/stop bit by software.
2. In dwc3_core_exit, the event buffer is cleared regardless of
the USB core's status, which may lead to an SMMU faults and
other memory issues. if the USB core tries to access the event
buffer address.
To prevent this hardware quirk on Exynos platforms, this commit ensures
that the event buffer address is not cleared by software when the USB
core is active during runtime suspend by checking its status before
clearing the buffer address. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: MT - limit max slots
syzbot is reporting too large allocation at input_mt_init_slots(), for
num_slots is supplied from userspace using ioctl(UI_DEV_CREATE).
Since nobody knows possible max slots, this patch chose 1024. |
| In the Linux kernel, the following vulnerability has been resolved:
parisc: fix a possible DMA corruption
ARCH_DMA_MINALIGN was defined as 16 - this is too small - it may be
possible that two unrelated 16-byte allocations share a cache line. If
one of these allocations is written using DMA and the other is written
using cached write, the value that was written with DMA may be
corrupted.
This commit changes ARCH_DMA_MINALIGN to be 128 on PA20 and 32 on PA1.1 -
that's the largest possible cache line size.
As different parisc microarchitectures have different cache line size, we
define arch_slab_minalign(), cache_line_size() and
dma_get_cache_alignment() so that the kernel may tune slab cache
parameters dynamically, based on the detected cache line size. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: prevent potential speculation leaks in gpio_device_get_desc()
Userspace may trigger a speculative read of an address outside the gpio
descriptor array.
Users can do that by calling gpio_ioctl() with an offset out of range.
Offset is copied from user and then used as an array index to get
the gpio descriptor without sanitization in gpio_device_get_desc().
This change ensures that the offset is sanitized by using
array_index_nospec() to mitigate any possibility of speculative
information leaks.
This bug was discovered and resolved using Coverity Static Analysis
Security Testing (SAST) by Synopsys, Inc. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5: avoid BUG_ON() while continue reshape after reassembling
Currently, mdadm support --revert-reshape to abort the reshape while
reassembling, as the test 07revert-grow. However, following BUG_ON()
can be triggerred by the test:
kernel BUG at drivers/md/raid5.c:6278!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
irq event stamp: 158985
CPU: 6 PID: 891 Comm: md0_reshape Not tainted 6.9.0-03335-g7592a0b0049a #94
RIP: 0010:reshape_request+0x3f1/0xe60
Call Trace:
<TASK>
raid5_sync_request+0x43d/0x550
md_do_sync+0xb7a/0x2110
md_thread+0x294/0x2b0
kthread+0x147/0x1c0
ret_from_fork+0x59/0x70
ret_from_fork_asm+0x1a/0x30
</TASK>
Root cause is that --revert-reshape update the raid_disks from 5 to 4,
while reshape position is still set, and after reassembling the array,
reshape position will be read from super block, then during reshape the
checking of 'writepos' that is caculated by old reshape position will
fail.
Fix this panic the easy way first, by converting the BUG_ON() to
WARN_ON(), and stop the reshape if checkings fail.
Noted that mdadm must fix --revert-shape as well, and probably md/raid
should enhance metadata validation as well, however this means
reassemble will fail and there must be user tools to fix the wrong
metadata. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: disallow setting special AP channel widths
Setting the AP channel width is meant for use with the normal
20/40/... MHz channel width progression, and switching around
in S1G or narrow channels isn't supported. Disallow that. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost_task: Handle SIGKILL by flushing work and exiting
Instead of lingering until the device is closed, this has us handle
SIGKILL by:
1. marking the worker as killed so we no longer try to use it with
new virtqueues and new flush operations.
2. setting the virtqueue to worker mapping so no new works are queued.
3. running all the exiting works. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ecdh - explicitly zeroize private_key
private_key is overwritten with the key parameter passed in by the
caller (if present), or alternatively a newly generated private key.
However, it is possible that the caller provides a key (or the newly
generated key) which is shorter than the previous key. In that
scenario, some key material from the previous key would not be
overwritten. The easiest solution is to explicitly zeroize the entire
private_key array first.
Note that this patch slightly changes the behavior of this function:
previously, if the ecc_gen_privkey failed, the old private_key would
remain. Now, the private_key is always zeroized. This behavior is
consistent with the case where params.key is set and ecc_is_key_valid
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panel: ilitek-ili9881c: Fix warning with GPIO controllers that sleep
The ilitek-ili9881c controls the reset GPIO using the non-sleeping
gpiod_set_value() function. This complains loudly when the GPIO
controller needs to sleep. As the caller can sleep, use
gpiod_set_value_cansleep() to fix the issue. |