| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: avs: Fix unbalanced module reference count
strace_open() invokes try_module_get() which on success takes
the module reference. If any follow up operation causes
strace_open() to fail, the refcount shall be put down. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix the possible bioc_list memory leak during error
There are two possible ways to leak bioc memory on
btrfs_ordered_extent::bioc_list:
- An error occurred for btrfs_insert_one_raid_extent()
Then the function btrfs_insert_raid_extent() immediately return
without freeing any bioc in the bioc_list.
- An ordered extent hit an IO error
In that case the ordered extent will have BTRFS_ORDERED_IOERR set, and
skip the call on btrfs_insert_raid_extent() completely.
Fix the problem by:
- Introduce a new helper, btrfs_cleanup_ordered_bioc_list()
Which will remove all bioc from the bioc_list, and release the bioc.
- Call the above helper for btrfs_insert_raid_extent()
So that the cleanup helper is always called no matter what.
- Call the above helper for btrfs_finish_one_ordered()
This is called just before the final release on the ordered extent.
This was reported by Sashiko when reviewing another patch. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix transaction use-after-free in raid stripe insertion
If allocation of a RAID stripe extent fails,
btrfs_insert_one_raid_extent() aborts and ends the transaction before
returning -ENOMEM.
btrfs_finish_one_ordered(), the production caller through
btrfs_insert_raid_extent(), still owns the transaction handle. It handles
the error by aborting the transaction and then reaches the common exit
path, which ends the transaction again.
The premature end can free the handle and drop its transaction reference.
Transaction cleanup can then free the transaction before the caller's
second abort accesses the handle and transaction, resulting in
use-after-free.
Keep the abort at the failure site, but let the caller's common exit path
end the transaction once, after it has finished using both objects. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmasp: clear txcb->last before writing each descriptor
bcmasp_xmit() only wrote txcb->last = true for the final fragment
of an SKB; non-final fragments left the field untouched. If a
descriptor slot was reused while it still held a stale true from
a previous SKB (possible when tx_spb_ring_full() underreported
fullness), bcmasp_tx_reclaim() would see last == true mid-SKB and
call dev_consume_skb_any() prematurely, freeing the sk_buff while
its remaining fragments were still in flight.
Unconditionally clear txcb->last before the conditional set so every
descriptor slot starts from a known false state regardless of what a
prior transmission left behind. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmasp: fix tx_spb_ring_full() checking same slot cnt times
The loop initialised next_index from intf->tx_spb_index on every
iteration, so incr_ring() always produced the same result and only
one slot was ever tested. Move the initialisation before the loop
so each iteration advances next_index and the function correctly
checks that cnt consecutive descriptor slots are available before
allowing a new transmission. |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: spectrum_ptp: Fix napi_gro_receive() call from GC workqueue context
Currently mlxsw_sp1_ptp_ht_gc_collect() is run from the PTP
garbage-collection workqueue, rather than the NAPI poll context. For any
unmatched PTP entries carrying an SKB, it calls
mlxsw_sp1_ptp_unmatched_finish() -> mlxsw_sp1_ptp_packet_finish(). For
ingress packets, this calls mlxsw_sp_rx_listener_no_mark_func(). The end
of that function is the following:
skb->protocol = eth_type_trans(skb, skb->dev);
napi_gro_receive(mlxsw_skb_cb(skb)->rx_md_info.napi, skb);
The napi pointer is one that was placed in the SKB control block when the
trapped packet was received in the NAPI context. Later, when the GC reaps
the unmatched entry (up to MLXSW_SP1_PTP_HT_GC_TIMEOUT later), the call to
napi_gro_receive() mutates the NAPI instance's GRO list, which is unsafe
if the poll is running concurrently on another CPU.
In mlxsw_sp1_ptp_ht_gc_collect(), local_bh_disable() is called to prevent
softirq processing, but this only applies to the local CPU. Additionally,
its comment is stale. It states that mlxsw_sp1_ptp_unmatched_finish()
invokes netif_receive_skb(). This has not been accurate since the
referenced commit; this patch makes that comment accurate again.
mlxsw_pci_napi_devs_init() calls netif_threaded_enable() on the NAPI RX
net_device without any conditions. The NAPI instance's poll, which may be
running concurrent to the GC, is running as an independently-scheduled
kthread which may be on a different CPU. The call to local_bh_disable()
does not guard against this.
If a tx-timestamp timeout produces an unmatched entry (which can be easily
reproduced by running ptp4l and waiting for a port to reach the
UNCALIBRATED/SLAVE state) while the owning NAPI thread is in the middle of
a poll on another CPU, both sides mutate the GRO list concurrently, as
shown below:
[39.846] port 1 (swp1): MASTER to UNCALIBRATED on RS_SLAVE
list_add corruption. next->prev should be prev (ffff8d620faf4138), but was ffff8d624150f700. (next=ffff8d620faf4138).
kernel BUG at lib/list_debug.c:29!
Oops: invalid opcode: 0000 [#1] SMP PTI
CPU: 1 UID: 0 PID: 539 Comm: napi/mlxsw_rx-0 Not tainted 6.18.48 #1-NixOS PREEMPT(lazy)
Hardware name: Mellanox Technologies Ltd. MSN2410/VMOD0001, BIOS 4.6.5 09/13/2018
RIP: 0010:__list_add_valid_or_report+0x79/0xb0
RSP: 0018:ffffcdf8c0f27c08 EFLAGS: 00010246
RAX: 0000000000000075 RBX: ffff8d624150fd00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8d6315d1e540
RBP: ffff8d620faf4070 R08: 0000000000000000 R09: 00000000ffffdfff
R10: ffffffffa5c60fe0 R11: ffffcdf8c0f27ab8 R12: 0000000000000003
R13: 000000000000003d R14: 00000000000001bc R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8d636f63f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000562689a60c24 CR3: 000000015f224004 CR4: 00000000001726f0
Call Trace:
<TASK>
gro_receive_skb+0xee/0x230
mlxsw_sp1_ptp_got_packet+0x61/0x140 [mlxsw_spectrum]
mlxsw_core_skb_receive+0xdf/0x1b0 [mlxsw_core]
mlxsw_pci_napi_poll_cq_rx+0x780/0x9d0 [mlxsw_pci]
__napi_poll+0x31/0x1e0
napi_threaded_poll_loop+0x16b/0x1c0
napi_threaded_poll+0x71/0xa0
kthread+0xfb/0x260
ret_from_fork+0x22d/0x260
ret_from_fork_asm+0x1a/0x30
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
The machinery that leads to this kernel panic has not been changed between
6.18.48 and mainline.
This patch adds an ingress-delivery helper for the PTP packet_finish()
path that calls netif_receive_skb() instead of napi_gro_receive().
netif_receive_skb(), unlike napi_gro_receive(), can be called from outside
of the NAPI instance's poll context, which can occur at the call site for
this path. RX stats accounting and the skb->dev assignment are still
preserved; the only change is the delivery call itself.
This removes GR
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: fs210x: fix possible buffer overflow
In fs210x_effect_scene_info(), a string was copied like this:
strscpy(DST, SRC, strlen(SRC) + 1);
A buffer overflow would happen if strlen(SRC) >= sizeof(DST).
Actually, strscpy() must be used this way:
strscpy(DST, SRC, sizeof(DST));
strscpy(DST, SRC); // defaults to sizeof(DST) |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pci: Check BAR resources before exporting a DMABUF
A DMABUF exports access to BAR resources and, although they are
requested at startup time, we need to ensure they really were reserved
before exporting. Otherwise, it's possible to access unreserved
resources through the export.
Add a check to the DMABUF-creation path. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: fix race between deleting interface and adding new peer
While deleting an existing ovpn interface, there is a very
narrow window where adding a new peer via netlink may cause
the netdevice to hang and prevent its unregistration.
It may happen during ovpn_dellink(), when all existing peers are
freed and the device is queued for deregistration, but a
CMD_PEER_NEW message comes in adding a new peer that takes again
a reference to the netdev.
At this point there is no way to release the device because we are
under the assumption that all peers were already released.
Fix the race condition by releasing all peers in ndo_uninit(),
when the netdevice has already been removed from the netdev
list.
Also ovpn_peer_add() has now an extra check that forces the
function to bail out if the device reg_state is not REGISTERED.
This way any incoming CMD_PEER_NEW racing with the interface
deletion routine will simply stop before adding the peer.
Note that the above check happens while holding the netdev_lock
to prevent racing netdev state changes.
ovpn_dellink() is now empty and can be removed. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_log: wait for rcu grace period before freeing pernet state
sashiko reports: "nfnl_log_net_exit() calls nf_log_unset(), which
clears the logger pointer without an RCU grace period. Immediately after,
ops_free_list() frees the per-net state while concurrent packets might
still be executing nf_log_packet() under rcu_read_lock()."
Clear the pointer via .pre_exit to make sure rcu readers have completed
before pernet storage is free'd. The change in nf_log_syslog.c is only
done for consistency: it doesn't use pernet data. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-apple: Prevent shared tags across queues on Apple A11
On Apple A11, tags of pending commands must be unique across the admin
and IO queues, else the firmware crashes with
"duplicate tag error for tag N", with N being the tag.
Apply the existing workaround for M1 of reserving two tags for the admin
queue to A11. |
| In the Linux kernel, the following vulnerability has been resolved:
bluetooth/l2cap: sync sock recv cb and release
The problem occurs between the system call to close the sock and hci_rx_work,
where the former releases the sock and the latter accesses it without lock protection.
CPU0 CPU1
---- ----
sock_close hci_rx_work
l2cap_sock_release hci_acldata_packet
l2cap_sock_kill l2cap_recv_frame
sk_free l2cap_conless_channel
l2cap_sock_recv_cb
If hci_rx_work processes the data that needs to be received before the sock is
closed, then everything is normal; Otherwise, the work thread may access the
released sock when receiving data.
Add a chan mutex in the rx callback of the sock to achieve synchronization between
the sock release and recv cb.
Sock is dead, so set chan data to NULL, avoid others use invalid sock pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Fix race condition during device registration
In hci_register_dev(), the power_on work item is queued to
hdev->req_workqueue before initializing hdev->adv_monitors_idr and
registering the MSFT extension via msft_register(). For devices marked with
quirks such as HCI_QUIRK_RAW_DEVICE, the HCI_UNCONFIGURED flag is set on
the device. When the power_on work item runs concurrently on another CPU,
hci_power_on() detects that the device is unconfigured and immediately
invokes hci_dev_do_close(), which calls msft_do_close().
Concurrently, msft_register() allocates the msft structure and exposes it
to hdev->msft_data prior to calling mutex_init(&msft->filter_lock). If
msft_do_close() executes while hdev->msft_data is already assigned but the
mutex has not yet been initialized, mutex_lock(&msft->filter_lock) operates
on an uninitialized mutex, triggering a DEBUG_LOCKS warning:
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: kernel/locking/mutex.c:625 at __mutex_lock_common
kernel/locking/mutex.c:625 [inline]
WARNING: kernel/locking/mutex.c:625 at __mutex_lock+0x12d8/0x1550
kernel/locking/mutex.c:821
...
Call Trace:
<TASK>
msft_do_close+0x308/0x7b0 net/bluetooth/msft.c:693
hci_dev_close_sync+0x86b/0x10a0 net/bluetooth/hci_sync.c:5522
hci_dev_do_close net/bluetooth/hci_core.c:499 [inline]
hci_power_on+0x32c/0x750 net/bluetooth/hci_core.c:937
process_one_work kernel/workqueue.c:3322 [inline]
process_scheduled_works+0xa8e/0x14e0 kernel/workqueue.c:3405
worker_thread+0x92d/0xe10 kernel/workqueue.c:3486
kthread+0x388/0x470 kernel/kthread.c:436
ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Fix this by moving the queue_work() call in hci_register_dev() to after
idr_init(&hdev->adv_monitors_idr) and msft_register(hdev) so that device
structures and extensions are fully initialized before asynchronous tasks
can access them. Additionally, assign hdev->msft_data in msft_register()
only after mutex_init(&msft->filter_lock) has completed. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark bpf_btf_find_by_name_kind() as sleepable
When bpf_btf_find_by_name_kind() finds a type in module BTF, it
returns a new BTF object fd through __btf_new_fd(). This reaches
anon_inode_getfd(), which can sleep while allocating or expanding the
current task fd table.
The helper prototype does not set might_sleep, so the verifier allows
the helper in non-sleepable contexts such as BPF timer callbacks. The
fd allocation can then sleep in softirq context and install the fd into
the interrupted task.
Mark the helper as sleepable. This preserves calls from the main body
of a sleepable syscall program while rejecting calls from its
non-sleepable regions. |
| In the Linux kernel, the following vulnerability has been resolved:
nexthop: Initialize extack in remove_nh_grp_entry()
remove_nh_grp_entry() prints the extack message when a listener fails
to replace the reduced nexthop group. However, extack is not
initialized and listeners are not required to set a message when
returning an error. Neither netdevsim nor mlxsw do so when an
allocation fails, resulting in the dereference of an uninitialized
stack pointer.
Fix by zero-initializing extack, as was done in commit 6347c5314cee
("nexthop: initialize extack in nh_res_bucket_migrate()"). |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: bcm_sf2: bound the CFP rule dump by the caller's buffer size
bcm_sf2_cfp_rule_get_all() walks the whole cfp.unique bitmap into
rule_locs[] without consulting nfc->rule_cnt, which is how many entries
the caller had room for. ETHTOOL_GRXCLSRLALL requires no CAP_NET_ADMIN
and the ioctl sizes the buffer from the rule_cnt userspace passes in, so
once an admin has installed CFP rules any user can ask for fewer slots
than there are rules and run off the end of the allocation. A rule_cnt
of 0 leaves the buffer pointer NULL and the walk dereferences it. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: mv88e6xxx: bound the policy rule dump by the caller's buffer size
mv88e6xxx_get_rxnfc() uses rxnfc->rule_cnt as the write index while
dumping the policy IDR, clobbering the input value before it has been
looked at. That input is the number of entries the caller had room for.
ETHTOOL_GRXCLSRLALL requires no CAP_NET_ADMIN and the ioctl sizes the
buffer from the rule_cnt userspace passes in, so once an admin has
installed policy rules any user can ask for fewer slots than there are
rules and run off the end of the allocation. A rule_cnt of 0 leaves the
buffer pointer NULL and the walk dereferences it.
Count into a local so the caller's limit survives the walk, and stop with
-EMSGSIZE once it is reached. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mcast: properly convert mglist to rcu
Sashiko reported a bug [1] that br_multicast_del_port_group unlists the
port group not using proper rcu helper that preserves the next pointer and
after that immediately frees the port group without waiting for rcu grace
period. The only rcu walker of mglist is br_multicast_list_adjacent() and
it turns out that function has always been buggy because mglist was never
properly converted to RCU. Fix it by converting it to rcu and moving its
initialization after eth_addr's. Initializing p->next can use
RCU_INIT_POINTER because we have a barrier from the hlist_add_head_rcu call
later, besides we're initializing an unpublished structure anyway.
[1] https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260826014200.362304-1-littleddfu%40gmail.com |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: cx82310_eth: drop URB after 0xffff reboot sentinel to prevent partial_data heap overflow
The 0xffff length sentinel detects a router reboot and schedules
re-enabling of ethernet mode, but then falls through to the rest
of the loop body. The next check is
} else if (len > CX82310_MTU) {
which is the else of the just-matched if -- it never fires for
len == 0xffff. The MTU bound that normally caps the
incomplete-packet save path is silently bypassed.
With 0xffff > skb->len always true (rx_urb_size is 4096), the
incomplete-packet branch saves dev->partial_len = skb->len bytes
into dev->partial_data. partial_data is kmalloc(hard_mtu) =
kmalloc(CX82310_MTU + 2) = 1516 bytes, but skb->len after the
2-byte header pull can be up to 4094. A device that sends a
4096-byte URB starting with [0xff 0xff] therefore copies 4094
device-provided bytes into a buffer allocated for 1516 bytes,
exceeding its requested size by 2578 bytes.
The next URB then reads dev->partial_len (4094) back from the same
1516-byte buffer and dev->partial_rem (65535 - 4094 = 61441) from
the new URB's ~4KB skb, both well past their allocations, and
delivers the spliced result as a 64KB "frame" to the network
stack.
Bail out of rx_fixup after scheduling the re-enable work; the
remainder of a reboot-marker URB is not meaningful packet data.
This restores the invariant that partial_len < CX82310_MTU + 2 on
the save path, since every other route there has already passed
the MTU check. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/ism: folio_put() after error
dmb->cpu_addr was allocated via folio_alloc(). Use folio_put() instead of
kfree() in the error exit of ism_alloc_dmb() to avoid slab allocator
corruption.
While at it, reset dmb->cpu_addr after folio_put to avoid unintentional UAF
by future callers. |