| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Use after free in Streaming in Google Chrome prior to 156.0.8078.47 allowed a remote attacker to potentially execute arbitrary code inside the sandbox via crafted network traffic. (Chromium security severity: Medium) |
| Use after free in WebAppInstalls in Google Chrome on on Android prior to 156.0.8078.47 allowed a remote attacker leveraging social engineering to execute arbitrary code outside the sandbox via a co-installed app. (Chromium security severity: High) |
| Use after free in Privacy in Google Chrome prior to 156.0.8078.47 allowed a remote attacker who had compromised the renderer process to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Use after free in SVG in Google Chrome prior to 156.0.8078.47 allowed a remote attacker to potentially execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Untrusted Pointer Dereference in ASUS certain motherboards firmware allows a kernel-level privileges user can supply an arbitrary memory address via an I/O command, leading to subsequent system information being tampered with or causing a system crash.
Refer to the 'Security Update for Multiple ASUS Motherboards' section on the ASUS Security Advisory for more information. |
| In the Linux kernel, the following vulnerability has been resolved:
keys: Protect the read method check against type removal
keyctl_read_key() checks key->type->read without holding key->sem.
A reference keeps the key alive, but does not pin the module containing
its type. A surviving RxRPC key can therefore be read while AF_RXRPC
is being unloaded:
KEYCTL_READ task Module unload and key GC
---------------- ------------------------
lookup_user_key()
permission / possession checks
load key->type
af_rxrpc_exit()
unregister_key_type()
GC: down_write(key->sem)
GC: retype to key_type_dead
GC: up_write(key->sem)
unregister_key_type() returns
free_module()
read saved type's read member
The final access can read freed module storage. The read invocation in
__keyctl_read_key() is already protected by key->sem, but the earlier
method check is outside that critical section.
Move the method check into __keyctl_read_key(), after key_validate() and
under its existing read hold on key->sem. The check and invocation then
use the same protected type for length queries and every read retry.
The GC cannot retype the key until the semaphore is released, and type
unregistration waits for that GC pass before the module can be freed.
Return -EOPNOTSUPP when validation succeeds and the type has no read
method. A temporary buffer may now be allocated before this result;
allocation and copying to userspace remain outside the semaphore. |
| FreeRDP before 3.32.2 contains a use-after-free in the urbdrc USB redirection channel because FindChannelById returns a channel pointer without a reference and the control-channel close path does not take the device manager's loading_lock. A malicious RDP server can send a control-channel CLOSE_REQUEST while the client announces a USB device, freeing the channel before the announcement thread reads channel->Write and crashing the client. |
| In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, the four non-secure-callable secure stack functions of the TrustZone-M ports dereference a thread pointer supplied by the non-secure world without checking that it points to non-secure memory. Non-secure code can make the secure firmware reveal which secure bytes are zero, write chosen secure words, and fault the secure world, breaking TrustZone-M isolation and enabling recovery of secure-world secrets such as cryptographic keys. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Save the event file instead of the compatible histogram
create_field_var_hist() creates a histogram on the matched event to
supply a field variable, and records it on the target so it can be torn
down later:
hist_data = find_compatible_hist(target_hist_data, file);
...
/* Save the compatible histogram information */
var_hist->hist_data = hist_data;
hist_data is not the histogram it creates. It is one that was already
there, whose keys the new one copies. The saved pointer has a single
user, unregister_field_var_hists(), which runs when the target is
removed:
file = hist_data->field_var_hists[i]->hist_data->event_file;
find_compatible_hist() matches on keys alone, so it can pick one with no
variables of its own. check_var_refs() then returns false and the user
can remove it while the target still points at it:
BUG: KASAN: slab-use-after-free in event_hist_trigger_free+0x2b2/0x320
Read of size 8 at addr ffff8880093b90e0 by task init/1
Freed by task 1:
kfree+0x154/0x420
event_hist_trigger_free+0x1d5/0x320
event_hist_trigger_parse+0x35f3/0x69e0
trigger_process_regex+0x1a6/0x250
Save the event file instead. It is all the dereference ever wanted, and
it does not go away when the user removes a trigger. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/histograms: Verify event_call identity when updating synth_event refcount
In event_hist_trigger_parse() and hist_unreg_all(), the histogram
registration and unregistration paths look up find_synth_event() using
trace_event_name(file->event_call) and adjust se->ref if a match is
found.
Because find_synth_event() only compares the event basename, registering
or removing a histogram on a non-synthetic trace event whose basename
matches a synthetic event erroneously modifies the synthetic event's
reference count. If a histogram is registered on the non-synthetic
event before the synthetic event is created and removed afterwards,
se->ref is decremented without a matching increment, allowing the
synthetic event to be freed while an active histogram action still holds
a pointer to it.
Introduce find_synth_event_call() to verify that &se->call matches
file->event_call before adjusting se->ref. |
| In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, built with TX_ENABLE_EVENT_TRACE, the Module Manager lets a user-mode, memory-protected module register any function pointer as the kernel's trace-buffer-full callback, which the kernel calls from privileged code when the trace buffer wraps. A malicious module can thereby run its own code with kernel privilege, defeating module isolation, or fault the kernel with an invalid pointer. |
| Refitter is a tool for generating a C# REST API client using the Refit library. Prior to 2.1.1, the `refitter` dotnet tool invokes `NJsonSchema` with unsafe defaults for `$ref` resolution when generating Refit interfaces and contracts from attacker-controlled or attacker-influenced OpenAPI descriptions. Remote `http(s)` references cause requests from the developer or CI host and inline untrusted remote schema content into generated output. Absolute local file paths and relative `../` traversal outside the input directory also resolve and inline local content, permitting arbitrary local-file disclosure. The demonstrated chain stops at server-side request forgery, remote file inclusion, and local file inclusion, not code execution: Refit sets the base URL at runtime, enum values use verbatim-string doubling, and string defaults are escaped. This issue is fixed in version 2.1.1. |
| Functype is a family of TypeScript functional programming libraries. Prior to 1.4.4, the `set_functype_version` MCP tool in `functype-mcp-server` accepts an unconstrained `version` string using only `z.string()` validation in `packages/mcp-server/src/index.ts` and interpolates it into `functype@<version>` for `pnpm add`. Package-alias syntaxes such as `file:`, `npm:`, URLs, or paths can cause an arbitrary local or remote package to be installed as functype. Immediately afterward, `initDocsData(true)` in `packages/mcp-server/src/lib/docs/data.ts` resolves `functype/cli` and dynamically imports the newly installed module, executing attacker-controlled JavaScript with the MCP server process's privileges. Any MCP client able to send a `tools/call` request invoking the tool can exploit the flaw; the tool is enabled by default without authentication in `stdio` mode. A connected AI assistant susceptible to indirect prompt injection can also be induced to invoke it from a malicious document or web page. In non-default `TRANSPORT_TYPE=httpStream` deployments, a network-accessible attacker does not require local access. Successful execution can read process secrets, modify files, or terminate the server. This issue is fixed in `version` 1.4.4. |
| A use-after-free issue was addressed with improved memory management. This issue is fixed in Safari 27.2, iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, tvOS 27.2, visionOS 27.2, watchOS 27.2. Processing maliciously crafted web content may lead to arbitrary code execution. |
| Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, an authenticated attacker may cause a heap-use-after-free in `PJSIP TCP/SDP` handling by sending a `SIP INVITE` over a connection-oriented transport and disconnecting before Asterisk responds with the `200 OK`. So far, the crash has only been reproduced when Asterisk is built with `Address Sanitizer`, which detects the issue. `Address Sanitizer` is a development tool with significant performance overhead and, according to the maintainer, is not used in production systems. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3. |
| Mistral Vibe before 3.0.3 contains a remote code execution vulnerability that allows attackers to run commands by defining git filter drivers in an untrusted repository's .git/config. When started with --worktree, git worktree add applies .gitattributes and runs filter smudge, clean, or process commands before the trusted-folder check, executing attacker commands with user privileges. |
| Due to use of a dangling pointer, libcurl 7.29.0 through 7.71.1 can use the wrong connection when sending data. |
| In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, the PendSV handler of the Cortex-M module ports saves a preempted user-mode module thread's registers in privileged mode at addresses taken from the thread's stack pointer, without checking that pointer against the thread's stack. A user-mode, memory-protected module can thereby write up to nine words, eight of its choosing, or 25 with floating-point state, into memory immediately below any region it may write, and read back what is stored there. |
| Roundcube Webmail before 1.6.20 and 1.7.x before 1.7.5 passes potentially unsafe content into ImageMagick when resizing images. SVG and EPS were accepted as valid image types for contact photo upload and conversion, and both formats can reference external resources and invoke ImageMagick delegates when processed. Upstream fixed this in the commit “Fix passing potentally unsafe attachment content into ImageMagick on image resize”, which removes svg and eps from the accepted types. |
| PHP has various global state that temporarily points into request memory. In some scenarios, global state may not be correctly reset, or may be repopulated after being reset. The global state may then refer to request memory even after it has been freed. Subsequent requests may read or branch on this stale state before it is fully initialized. Multiple strategies can trigger this condition and produce remote code execution (RCE). |