| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: add bounds check on firmware mac_id in link lookup
The mac_id field in RX descriptors is 8 bits wide (0-255), but
assoc_link_on_macid[] has only RTW89_MAX_MAC_ID_NUM (128) entries.
While the driver currently assigns mac_id values below 128, the
descriptor value comes from firmware and is not validated before use
as an array index. Add a defensive bounds check in
rtw89_assoc_link_rcu_dereference() to guard against out-of-range
firmware values. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: fix OOB access from firmware tx status queue ID
ath_tx_edma_tasklet() accesses sc->tx.txq[ts.qid] where ts.qid is a
4-bit hardware field (0-15), but the txq array only has
ATH9K_NUM_TX_QUEUES (10) entries. A qid >= 10 causes an OOB array
access.
Add a bounds check on ts.qid before using it as an array index. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Fix snp_filter_reserved_mem_regions() off-by-one
Sashiko notes:
> regarding the bounds check in snp_filter_reserved_mem_regions()
> called via walk_iomem_res_desc(): does the check
> if ((range_list->num_elements * 16 + 8) > PAGE_SIZE)
> allow an off-by-one heap buffer overflow?
>
> If range_list->num_elements is 255, 255 * 16 + 8 = 4088, which is <= 4096.
> Writing range->base (8 bytes) fills 4088-4095, but writing range->page_count
> (4 bytes) would write to 4096-4099, overflowing the kzalloc-allocated
> PAGE_SIZE buffer.
Fix this by accounting for the entry about to be written to, in addition to
the entries that are already allocated. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/srpt: fix integer overflow in immediate data length check
imm_buf->len is a user-controlled uint32_t received from the network.
Adding it to imm_data_offset without overflow checking allows a
malicious initiator to send len=0xFFFFFFFF, causing req_size to wrap
around to a small value, bypassing the bounds check, and subsequently
passing a ~4GB length to sg_init_one().
Use check_add_overflow() to detect wrapping before the comparison. |
| ExtUtils::Typemaps::STL::List versions before 1.07 for Perl allocate a 32 GiB array on an empty list.
The OUTPUT typemaps call av_extend( av, len-1 ). On an empty list, this undeflows, and av_extend will allocate an array with 2^32 slots, leading to memory exhaustion.
Note that a similar issue was fixed in ExtUtils::Typemaps::STL::Vector version 1.05. |
| MP4v2 through 2.1.3 contains a heap-based out-of-bounds read in MP4File::GetChapters() that allows attackers to read past heap allocations via crafted QuickTime chapter samples. Attackers can supply an MP4 file whose chapter sample is shorter than its declared title length, crashing applications like mp4chaps or leaking adjacent heap memory into chapter titles. |
| An external control of system or configuration setting vulnerability has been reported to affect QuRouter. If a local attacker gains an administrator account, they can then exploit the vulnerability to modify data on the system.
We have already fixed the vulnerability in the following version:
QuRouter 2.7.2.113 and later |
| Improper Validation of Syntactic Correctness of Input vulnerability in mtrudel bandit allows an unauthenticated remote attacker to set conn.host and conn.port to values outside the RFC 3986 host grammar via the authority of an HTTP/1 absolute-form or authority-form request target. Bandit validates the Host header and answers 400 when it is malformed, but when the request target carries its own authority that authority takes precedence, as RFC 9112 requires, and Bandit.Pipeline.determine_host_and_port!/4 in lib/bandit/pipeline.ex passes it to the application unchecked. A request line such as GET http://good.example@evil.example/x HTTP/1.1 with a valid Host header yields a conn.host of good.example@evil.example, and the same path admits NUL, DEL and non-ASCII bytes, invalid IP literals and ports outside 1..65535. The HTTP/1.0 clause needs no Host header at all, and CONNECT places the unparsed port string in conn.port.
Applications that build absolute URLs from conn.host, such as through Plug.Conn.request_url/1 or Phoenix URL helpers, emit links whose authority the attacker chose. Message framing is unaffected, and no CR or LF can reach conn.host.
This issue affects bandit: from 0.6.0 before 1.13.0. |
| Heap-based buffer overflow in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. |
| Stack-based buffer overflow in Microsoft Office Outlook allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. |
| Integer overflow or wraparound in Windows Raw Image Extension allows an unauthorized attacker to execute code over a network. |
| IBM Planning Analytics 2.0, and 2.1 could allow a remote authenticated attacker to execute arbitrary code due to a stack-based buffer overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
gpu: host1x: Fix iommu_map_sgtable() return value check
Commit "iommu: return full error code from iommu_map_sg[_atomic]()"
changed iommu_map_sgtable() to return an ssize_t and negative values
in error cases, rather than a size_t and a zero.
pin_job() also was incorrectly assigning to 'int', which could cause
overflows into negative values.
Update pin_job() to correctly check for errors from iommu_map_sgtable. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix TOCTOU heap overflow in get_srq_wqe
get_srq_wqe() reads wqe->dma.num_sge from the shared receive queue
buffer, which is mapped into userspace. It validates num_sge against
max_sge, but then re-reads the same field to calculate the memcpy
size. A concurrent userspace thread can modify num_sge between
validation and use, causing a heap buffer overflow when copying the
WQE into qp->resp.srq_wqe.
Read num_sge into a local variable and use it for both the bounds
check and the size calculation. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Copy WQE to local buffer in non-SRQ receive path
For non-SRQ QPs, the responder reads WQE fields directly from the
shared queue buffer mapped into userspace. This allows a malicious
user to modify fields like num_sge or sge entries while the kernel
is processing the WQE, leading to out-of-bounds reads in
rxe_resp_check_length() and copy_data().
Introduce get_recv_wqe() that validates num_sge and copies the WQE
to a kernel-local buffer before processing, matching the approach
already used for SRQ WQEs in get_srq_wqe(). The srq_wqe buffer is
reused since SRQ and non-SRQ paths are mutually exclusive per QP. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix FDP fdpcidx bounds check
The fdpcidx bounds check sets n = NUMFDPC + 1 but used > instead of >=,
incorrectly accepting fdp_idx when it equals n (i.e. NUMFDPC + 1). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wcn36xx: fix OOB read from firmware count in PRINT_REG_INFO indication
The firmware-controlled rsp->count field is used as the loop bound for
indexing into the flexible rsp->regs[] array without validation against
the message length. A count exceeding the actual data causes out-of-
bounds reads from the heap-allocated message buffer.
Add a check that count fits within the received message. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: acp-sdw-legacy: Bound DAI link iteration
create_sdw_dailinks() walks soc_dais until it finds an entry with
initialised cleared, but soc_dais is allocated with exactly num_ends
entries. If all entries are initialised, the loop reads past the end of
the array.
This was reported by KASAN:
BUG: KASAN: slab-out-of-bounds in mc_probe+0x26b3/0x2774 [snd_acp_sdw_legacy_mach]
Read of size 1
Pass the allocated entry count to create_sdw_dailinks() and stop before
reading past the array. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: acp-sdw-sof: Bound DAI link iteration
create_sdw_dailinks() walks sof_dais until it finds an entry with
initialised cleared, but sof_dais is allocated with exactly num_ends
entries. If all entries are initialised, the loop reads past the end of
the array.
Pass the allocated entry count to create_sdw_dailinks() and stop before
reading past the array. |