| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: cros_usbpd_notify: Only use drvdata when parent is GOOG0004
cros_usbpd_notify_probe_acpi() takes the EC device pointer from
dev_get_drvdata(dev->parent) and assumes it is a struct cros_ec_device.
That only holds when GOOG0003 is a child of GOOG0004. On older devices
without that hierarchy, such as Google Nami, GOOG0003 and GOOG0004 are
siblings under the ACPI EC (PNP0C09):
PNP0C09:00 (acpi-ec)
|-- GOOG0003:00 (cros-usbpd-notify-acpi)
`-- GOOG0004:00 (cros_ec_lpcs)
Before commit db65a06d10b3 ("ACPI: EC: Convert the driver to a platform
one") the parent platform device had no driver data, so the driver
warned and continued without an EC pointer, as intended for these
devices. Since that commit the ACPI EC driver stores its struct acpi_ec
there, so the driver treats a struct acpi_ec as a struct cros_ec_device
and calls cros_ec_cmd() on it for every USB-C PD host event. Plugging
or unplugging a charger then intermittently oopses, followed by soft
lockups and a hung system:
BUG: unable to handle page fault for address: ffffffff9cf03220
#PF: supervisor write access in kernel mode
Hardware name: Google Nami/Nami, BIOS 09/19/2019
Workqueue: kacpi_notify acpi_os_execute_deferred
RIP: 0010:native_queued_spin_lock_slowpath+0x29d/0x330
Call Trace:
_raw_spin_lock_irqsave+0x59/0x80
__mutex_lock.constprop.0+0x129/0x930
cros_ec_cmd_xfer+0x2a/0xf0 [cros_ec_proto]
cros_ec_cmd_xfer_status+0x1a/0x90 [cros_ec_proto]
cros_ec_cmd+0xb7/0x140 [cros_ec_proto]
cros_usbpd_get_event_and_notify+0x42/0xc0 [cros_usbpd_notify]
acpi_ev_notify_dispatch+0x4e/0x70
acpi_os_execute_deferred+0x1a/0x30
Only read the parent's driver data when the parent's ACPI node is
GOOG0004, and otherwise continue without an EC pointer. While at it,
drop the reference taken by fwnode_get_parent(). |
| In the Linux kernel, the following vulnerability has been resolved:
mm/userfaultfd: only allocate anon_vma in CoW mappings
find_vma_and_prepare_anon() can end up allocating an anon_vma in VMAs that
are not CoW mappings, which is wrong.
If we have a MAP_SHARED R/O file mapped, we lack VM_SHARED (but do have
VM_MAYSHARE) and lack VM_MAYWRITE.
While uffd later rejects such mappings (uffd registration requires
VM_MAYWRITE, see comment in validate_dst_vma) find_vma_and_prepare_anon()
still wrongly allocates an anon vma before it validates the vma.
This in turn later confuses copy_page_range()->vma_needs_copy() such
that we end up calling copy_hugetlb_page_range() with ranges that
actually do not contain *any* per-pagetable information that would
require copying, which is the basis for PMD-table sharing in the first
place.
copy_hugetlb_page_range() should not have to worry about shared
PMD tables at all: it doesn't make any sense to copy page tables that are
shared, as they can be fully recreated later. Ending up in the function
with shareable page tables is the real issue.
If a destination PMD table is shared in copy_hugetlb_page_range(), it
might get concurrently unshared as we are not holding relevant
locks, resulting in us using a page table that is no longer mapped and
possibly freed after calling:
dst_pte = huge_pte_alloc(dst, dst_vma, addr, sz);
To fix it, do not allocate an anon_vma in non-CoW mappings and add a
safety guard to copy_hugetlb_page_range(), making sure that we never
end up messing with shared PMD tables in there.
Before commit 867a43a34ff8a ("userfaultfd: use per-vma locks in userfaultfd
operations") we would always validate the VMA before allocating an
anon_vma, and consequently never wrongly allocate an anon_vma.
As uffd_lock_vma() is part of the same lookup machinery and
also contains a misleading VM_SHARED check, change that one as well
directly for consistency.
A follow-up cleanup will stop taking the hugetlb_vma_lock_read(src_vma)
lock in copy_hugetlb_page_range() entirely. Further, the usage of
VM_SHARED in userfaultfd code should be cleaned up later to focus on
CoW vs. non-CoW mappings. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/shmem: honour F_SEAL_EXEC when an ACL is set
The owner of a memfd sealed with F_SEAL_EXEC can still change its
execute bits by setting a POSIX access ACL. With CONFIG_TMPFS_POSIX_ACL,
this lets an unprivileged owner make a non-executable memfd executable,
bypassing vm.memfd_noexec=2.
simple_set_acl() updates i_mode directly, bypassing the seal check in
shmem_setattr(). Add shmem_set_acl() to check the resulting mode. Share
the F_SEAL_EXEC check with shmem_setattr() using memfd_check_seals_mode()
in include/linux/memfd.h.
Fix generated by an LLM and sent by Chris Mason in private.
[ david: use common helper; simplify description ] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: usb: route bmc frames via the high queue only for DTIM delivery
In AP mode every broadcast and multicast data frame is routed to
TX_DESC_QSEL_HIGH, the after-DTIM queue, whether or not anybody is
asleep. The firmware drains that queue at beacon pace, a dozen or so
frames per second measured on RTL8822BU, while one associated client's
mDNS/SSDP chatter alone exceeds that. The excess accumulates inside
the chip until the shared TX page pool is exhausted (measured: 14 of
1803 pages left). From that point every host-sourced frame queues
behind the backlog: authentication responses reach the air seconds
after the client has given up, so no station can associate anymore,
and the beacon reserved-page download fails the BCN_VALID poll
("error beacon valid") because it needs pages from the same pool. The
AP keeps beaconing, so the failure looks like a silent RX stall and
only a reboot recovers.
mac80211 already decides when after-DTIM delivery is needed: it sets
IEEE80211_TX_CTL_SEND_AFTER_DTIM on bmc frames only while at least one
station is actually dozing. Honor that instead of routing
unconditionally: flagged frames keep going through the high queue with
the MORE_DATA and HGQMD handling introduced by commit 076f786a0ae1
("wifi: rtw88: Fix AP mode incorrect DTIM behavior"), everything else
leaves at line rate through the AC queues. This partially reverts the
usb.c hunk of that commit, whose unconditional routing is what lets
the backlog build up.
On a bench AP (USB2, 20 MHz, WPA2, hostapd, a Windows client driven
through disconnect/reconnect cycles): reconnects fail 0/5 on RTL8822BU
and 0/3 on RTL8821CU before this change, and pass 10/10 and 5/5 with
it, with the page pool staying healthy and no beacon errors logged. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: usb: bound what the driver feeds the after-DTIM queue
Frames routed to the high queue are transmitted right after DTIM beacons
only, inside the ATIM window, while they wait in the shared TX page pool.
The driver puts no limit on how many it hands over, so as long as one
station dozes, any sustained broadcast or multicast traffic outruns the
drain and empties the pool: measured on an RTL8822BU AP with a single
client in power save and ~40 frames/s of mDNS chatter, the free page
count at 0x240 goes from 1803 to 16 in about 100 seconds and stays there
for as long as the traffic lasts. From that point every other transmit
queues behind the backlog, authentication responses arrive too late for
anyone to join, and the reserved page download fails ("error beacon
valid"). The AP keeps beaconing and only a reboot recovers.
Feed the high queue through a small budget that refills below the
measured drain rate (about 3 frames per DTIM, ~15/s at dtim_period 2 on
the default 2 TU ATIM window); whatever exceeds the budget leaves on its
access category queue right away. The high queue backlog is now bounded
by the burst size under any load, so the page pool cannot run dry, at
the price that a dozing station may miss part of a broadcast storm. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: zone: fix to avoid bio split on sequential zone
In the block layer, bio_split_to_limits() splits a bio if it exceeds
any underlying queue limits:
1. queue_max_sectors: Splits bios larger than the transfer limit. This
limit is set by the device driver/DMA controller (max_hw_sectors) and
device-mapper targets. When flushing dirty pages (governed by VFS
writeback_chunk_size() and f2fs nr_pages_to_skip()), f2fs merges
contiguous pages into bios up to 512KB (1024 sectors) or more without
checking queue_max_sectors, which will be split if the device or DM
target enforces a smaller limit.
2. queue_max_segments: Splits bios exceeding scatter-gather segment
limits. f2fs allocates bios with up to 256 pages, exceeding the
128-segment limit of DM targets (dm-default-key/dm-crypt) if pages
are discontiguous.
3. chunk_sectors: Splits bios crossing chunk/zone boundaries. In f2fs,
section_size strictly matches zone_size, and block allocation never
spans across section boundaries, so bios never cross chunk_sectors.
Crucially, when bio_split_to_limits() splits a bio, bio_submit_split()
submits the tail half via submit_bio_noacct() before returning the head
half to the caller. On a sequential zoned device, this causes the tail
bio to arrive at the zone write plug before the head:
dm-3: zone 7: prepare_bio wp mismatch: bio sector 30720 offset 2048
!= wp_offset 248, len 248
The write plug rejects the out-of-order tail with BLK_STS_IOERR, causing
f2fs_stop_checkpoint() and remounting the filesystem read-only:
2026-09-30T22:09:23.725678+08:00 localhost kernel: CPU: 9 UID: 0 PID: 243 Comm: kworker/9:1H Not tainted 6.12.81-gb3ef518fb26d #5
2026-09-30T22:09:23.725750+08:00 localhost kernel: Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
2026-09-30T22:09:23.725753+08:00 localhost kernel: Workqueue: dm-3_zwplugs blk_zone_wplug_bio_work
2026-09-30T22:09:23.725756+08:00 localhost kernel: Call Trace:
2026-09-30T22:09:23.725758+08:00 localhost kernel: <TASK>
2026-09-30T22:09:23.725758+08:00 localhost kernel: dump_stack_lvl+0x4d/0x70
2026-09-30T22:09:23.725759+08:00 localhost kernel: f2fs_stop_checkpoint+0x1df/0x5d0
2026-09-30T22:09:23.725759+08:00 localhost kernel: ? blk_zone_wplug_bio_work+0x4eb/0x740
2026-09-30T22:09:23.725760+08:00 localhost kernel: f2fs_cache_write_end_io+0x545/0x6e0
2026-09-30T22:09:23.725761+08:00 localhost kernel: blk_zone_wplug_bio_work+0x4eb/0x740
2026-09-30T22:09:23.725762+08:00 localhost kernel: process_one_work+0x5c6/0xde0
2026-09-30T22:09:23.725764+08:00 localhost kernel: ? assign_work+0x124/0x4e0
2026-09-30T22:09:23.725765+08:00 localhost kernel: worker_thread+0x403/0xb70
2026-09-30T22:09:23.725765+08:00 localhost kernel: ? __kthread_parkme+0x82/0x140
2026-09-30T22:09:23.725766+08:00 localhost kernel: ? __pfx_worker_thread+0x10/0x10
2026-09-30T22:09:23.725766+08:00 localhost kernel: kthread+0x235/0x2e0
2026-09-30T22:09:23.725767+08:00 localhost kernel: ? recalc_sigpending+0x128/0x1d0
2026-09-30T22:09:23.725767+08:00 localhost kernel: ? __pfx_kthread+0x10/0x10
2026-09-30T22:09:23.725769+08:00 localhost kernel: ret_from_fork+0x2f/0x70
2026-09-30T22:09:23.725769+08:00 localhost kernel: ? __pfx_kthread+0x10/0x10
2026-09-30T22:09:23.725770+08:00 localhost kernel: ret_from_fork_asm+0x1a/0x30
2026-09-30T22:09:23.725771+08:00 localhost kernel: </TASK>
2026-09-30T22:09:23.725771+08:00 localhost kernel: F2FS-fs (dm-0): Stopped filesystem due to reason: 3
To prevent write bios destined for sequential zones from being split:
1. In __bio_alloc(), bound npages to bdev_max_segments(bdev) for writes to
sequential zone areas.
2. In page_is_mergeable(), check queue_max_segments() and queue_max_sectors()
for sequential zone areas, so f2fs will not merge beyond the queue limits. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: return -EIO for a lost inode block after cp_error
After cp_error, dirty node caches are dropped without being written.
If such an inode was never written, its NAT entry is still NEW_ADDR,
and reading its inode block returns -ENOENT.
f2fs_get_dnode_of_data() passes that -ENOENT up, and callers take it
as a hole. Since the inode block is missing, the next offset can only
advance one block, so fiemap walks block by block up to maxbytes,
about 2^30 blocks, while holding the inode lock. It took hours in a
power-off recovery test after shutdown and blocked unlink and umount
on the file.
Return -EIO instead of -ENOENT when the inode block itself is missing
after cp_error or shutdown. A missing direct or indirect node is still
reported as -ENOENT. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: bound the SIT/NAT bitmaps by the checkpoint pack
sit_ver_bitmap_bytesize and nat_ver_bitmap_bytesize are used as memcpy
lengths into and out of sbi->ckpt, which is sized from cp_payload alone,
and nothing compares either length against that allocation.
sanity_check_ckpt() has checked these two fields since c77ec61ca0a4, which
added them after a crafted image overran build_sit_info(). That check ties
each length to a segment count; it never compares either against the
allocation, which is the half this adds.
Mounting over-reads in build_sit_info() and build_node_manager(), and the
first checkpoint writes the same lengths back through the same pointers,
so the over-read's contents reach the on-disk checkpoint. An unmount is
enough; the filesystem does not have to be used.
Bound both ends the way __bitmap_ptr() lays them out. The three branches
differ, so a single sum of the two lengths would still admit a small
overflow when cp_payload is non-zero. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic: Stop the target vcpu when disabling LPIs
Disabling LPIs is pretty nasty, as it directly messes with the AP list
of the affected CPU, which could be running... This has the potential to
lead to really bad behaviours, and we should not be doing that.
Take example on the way the Active state is handled and simply pause the
the vcpu so that we are sure it is in a quiescent state, and the state be
safely manipulated.
Nobody has any expectation of performance for this anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid potential reference count leak in do_garbage_collect()
In do_garbage_collect(), we have reserved reference counts on summary cache
of all segments, once gc_thread encounter freezing, we need to release all
reference counts. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-tcp: Validate the queue state under the queue lock in the address attribute
Reading the "address" sysfs attribute calls kernel_getsockname() on the
admin queue socket, which can race with the queue teardown during
connection error recovery: a reader can observe NVME_TCP_Q_LIVE set,
then block on the queue lock while nvme_tcp_free_queue() releases the
socket and clears queue->sock without holding the lock. Once the
reader acquires the lock it dereferences the NULL socket pointer.
Commit 76d54bf20cdc ("nvme-tcp: don't access released socket during
error recovery") had the queue liveness check inside the lock.
Commit 782373ba2766 ("nvme: tcp: avoid race between queue_lock lock
and destroy") moved it back out because the lock itself is destroyed
in nvme_tcp_free_queue(), so a reader arriving late trips
mutex_destroy().
Check the queue liveness inside the queue lock, and clear queue->sock
under the same lock. The teardown clears NVME_TCP_Q_LIVE under the
lock well before the socket is released, so a reader either sees the
bit cleared or a socket that cannot be released while it holds the
lock. To also close the lock lifetime race, the queue locks are now
owned by the controller: they are initialized with the queue array and
only destroyed when the controller is freed, which cannot happen while
a sysfs attribute read is still in progress. The queue count is
computed by the NVME_TCP_OPT_NR_QUEUES() macro from the original
connect options for both initialization and destruction, as reconnects
may shrink ctrl->queue_count. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to invalidate curseg if change_curseg() fails
Our consistency stress test (fsstress + fio + atomic write workers +
"f2fs_io shutdown 1") triggers below kernel BUG:
F2FS-fs (vdd): Stopped filesystem due to reason: 0
------------[ cut here ]------------
kernel BUG at fs/f2fs/segment.c:3989!
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
Workqueue: writeback wb_workfn (flush-253:48)
RIP: 0010:f2fs_allocate_data_block+0x257a/0x38e0
Call Trace:
<TASK>
do_write_block+0x155/0xc10
f2fs_outplace_write_data+0x192/0x340
f2fs_do_write_data_page+0xc57/0x1880
f2fs_write_single_data_page+0xda9/0x15a0
f2fs_write_cache_pages+0x973/0x1f20
__f2fs_write_data_pages+0x6c4/0x1890
do_writepages+0x21e/0x560
__writeback_single_inode+0x119/0x11b0
writeback_sb_inodes+0x67d/0x17a0
wb_writeback+0x207/0x820
wb_workfn+0x128/0xc30
process_one_work+0x925/0x1600
worker_thread+0x60a/0xff0
kthread+0x35f/0x460
ret_from_fork+0x474/0x7e0
ret_from_fork_asm+0x1a/0x30
</TASK>
The BUG is f2fs_bug_on(sbi, curseg->next_blkoff >= BLKS_PER_SEG(sbi))
in f2fs_allocate_data_block(), next_blkoff was 512.
The root cause is a race in between atomic write commit and shutdown
as below:
Thread A (commit atomic write) Thread B (shutdown) Thread C (writeback)
- f2fs_ioc_commit_atomic_write
- f2fs_commit_atomic_write
- __f2fs_commit_atomic_write
- __replace_atomic_write_block
- f2fs_replace_block
- __f2fs_replace_block
- f2fs_ioc_shutdown
- f2fs_do_shutdown
: F2FS_GOING_DOWN_METASYNC
- f2fs_sync_fs
- f2fs_write_single_data_page
: pass f2fs_cp_error() check
- f2fs_stop_checkpoint
: set CP_ERROR_FLAG
- change_curseg
- reset_curseg
: curseg->segno = new_segno
: curseg->alloc_type = SSR
: curseg->next_blkoff = __next_free_blkoff()
which is BLKS_PER_SEG if there is no free
slot in new_segno
- f2fs_get_sum_cache
: return -EIO due to f2fs_cp_error()
: return error w/o restoring curseg
: goto out_unlock, skip restoring
old segno, blkoff and alloc_type
- f2fs_do_write_data_page
- f2fs_outplace_write_data
- do_write_block
- f2fs_allocate_data_block
: curseg->segno is valid
: f2fs_bug_on(next_blkoff >=
BLKS_PER_SEG)
Since commit 86f33603f8c5 ("f2fs: handle errors of
f2fs_get_meta_page_nofail"), change_curseg() can fail after the curseg
has already been switched to the new segment, then the curseg is left
in an inconsistent state: it points to a segment which may have no
free slot, its summary block is zeroed, and the caller can not restore
it. Subsequent block allocation on the curseg will trigger the BUG.
Moreover, the writeback thread dies with curseg_lock, curseg_mutex and
sentry_lock held, so the commit, shutdown and other I/O threads hang
in D state.
Since change_curseg() only fails once CP_ERROR_FLAG is set, no
checkpoint will be committed afterward, let's invalidate the curseg via
reset_curseg_fields() on failure, as new_curseg() does for -ENOSPC,
then f2fs_allocate_data_block() will fail with -ENOSPC on the curseg
instead of triggering BUG, and do_write_block() can handle the error
since CP_ERROR_FLA
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: release a removed xattr node in roll-forward recovery
When xattrs shrink enough to fit in the inline xattr area,
write_all_xattrs() truncates the xattr node and clears i_xattr_nid. If
the file is then fsynced without a checkpoint, only the inode block is
written, with i_xattr_nid of 0.
Roll-forward recovery starts from the checkpointed inode, whose
i_xattr_nid still points to the old xattr node.
f2fs_recover_inline_xattr() copies only the inline xattr area, and
f2fs_update_inode() writes the old i_xattr_nid back. So the inode keeps
the stale xattr node:
- The node block is never released, and fsck reports "nonzero bytes in
xattr space after end of list".
- If the inline xattr list ends exactly at the end of the inline area,
its terminator is read from the stale node, and the removed xattrs
come back after recovery.
When the fsynced inode has no xattr node but the checkpointed one has,
release the old xattr node as truncate_node() does: check its block
address, invalidate the block and drop its node cache, which may still
be dirty. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd/iova_bitmap: Ensure that iova_bitmap_set() handles the full IOVA
Generally userspace is going to step the dirty bitmap through the IOVA
space. However if the bitmap ends in the middle of a large PTE this is
problematic. The first step will clear the dirty bit and report dirty to
the end of its bitmap while the second step will see the clear'd dirty and
report clean for the start of the bitmap. If it happens this ends up
losing dirties.
Further this function is missing bounds checking so if this does happen
ther is a good chance it will write memory beyond what the userspace was
expecting.
Return an error code if this illegal condition happens. |
| In the Linux kernel, the following vulnerability has been resolved:
assoc_array: don't chain a new shortcut onto an existing one
When a full node's leaves and the new key all share the node's segment,
assoc_array_insert_into_terminal_node() replaces the node with a
shortcut to a pair of new nodes. If the node is itself the target of a
shortcut, the new shortcut is installed as that shortcut's next node,
and a shortcut leading to a shortcut is something nothing expects:
assoc_array_walk() indexes the second one as a node, and
assoc_array_apply_edit() hits the BUG_ON() in the loop that adjusts
nr_leaves_on_branch, on that same insertion.
Deletion gets a node there. When the subtree below a shortcut shrinks
enough, assoc_array_delete() collapses it into one node below the
shortcut, and the leaves it collects can all share that node's segment.
The next key that shares it too takes this path. Eighteen insertions
and a deletion are enough: sixteen keys that agree on bits 0-11, one
that leaves them at bit 8 and is deleted again, and one more that agrees
with the sixteen.
Have the new shortcut replace the one in front of the node as well.
assoc_array_insert_shortcut() gives it that shortcut's back pointer and
parent slot, so the caller installs it where that one was, and excises
the old shortcut along with the node, which takes a second entry in
excised_meta[]. The new shortcut's index key comes from the new key up
to the new skip level, so it covers what the old one did.
Found by a userspace test doing random insertions and deletions on keys
that share long prefixes; a targeted case builds a shortcut, deletes
down to the collapse and inserts one more key. |
| In the Linux kernel, the following vulnerability has been resolved:
assoc_array: keep gc's cleanup out of the live tree on allocation failure
assoc_array_gc() builds a copy of the tree. Where the copy reaches a
shortcut, it allocates the copy of the shortcut with kmalloc_flex(),
fills it with memcpy(), links it into the new tree, and only then
allocates the copy of the node after it. The memcpy() leaves the new
shortcut's next_node pointing at the old tree's node, so if that second
allocation fails, the cleanup, assoc_array_destroy_subtree() on the new
tree, follows the new shortcut into the old tree, and the BUG_ON() on
the old node's back pointer fires.
Allocate the node first, and the shortcut once the node exists, freeing
the node again if the shortcut cannot be allocated. A copied shortcut
is then only linked into the new tree when the copy of its node is there
to follow it. Nothing else changes: with no allocation failing, the
trees gc builds are the same as before.
Found by a userspace test that makes each allocation of each operation
fail in turn. |
| A security vulnerability has been detected in XiangLi1999 Diffusion-LM up to 759889d58ef38e2eed41a8c34db8032e072826f4. This issue affects the function main of the file improved-diffusion/scripts/text_sample.py. Such manipulation of the argument out_dir leads to path traversal. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The project was informed of the problem early through an issue report but has not responded yet. |
| A weakness has been identified in XiangLi1999 Diffusion-LM up to 759889d58ef38e2eed41a8c34db8032e072826f4. This vulnerability affects the function os.system of the file improved-diffusion/scripts/infill.py. This manipulation of the argument notes causes os command injection. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. This product follows a rolling release approach for continuous delivery, so version details for affected or updated releases are not provided. The project was informed of the problem early through an issue report but has not responded yet. |
| Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in ninenines cowlib allows unauthenticated remote denial of service via memory exhaustion.
cow_spdy:inflate/2 in cowlib passes peer-supplied compressed bytes directly to zlib:inflate/2 with no output size bound. The SPDY header compression dictionary (?ZDICT) is public, and zlib compresses long runs of repeated bytes at roughly 1024:1, so a few kilobytes of SPDY frame payload can decompress to gigabytes on the BEAM heap, OOM-killing the node. A single unauthenticated SPDY frame is sufficient to trigger the condition. The parsers for syn_stream, syn_reply, and headers frame types are all affected via cow_spdy:parse_headers/2.
This issue affects cowlib: from 0.1.0 before 2.16.1. |
| Allocation of Resources Without Limits or Throttling vulnerability in ninenines cowboy allows denial of service via unbounded buffer accumulation in multipart header parsing.
cowboy_req:read_part/3 in src/cowboy_req.erl accumulates incoming request bytes into a Buffer binary with no upper-bound check. When cow_multipart:parse_headers/2 returns more or {more, Buffer2}, the function reads up to Length bytes (default 64 KB) from the request body and recurses with the enlarged buffer. There is no equivalent of the byte_size(Acc) > Length guard present in the sibling function read_part_body/4. An unauthenticated attacker can send a multipart/form-data request whose body never yields a complete header section — for example, a body that never contains the advertised boundary delimiter, or one whose header lines never contain \r\n\r\n — and force the server process to accumulate memory linearly with the bytes the protocol layer is willing to deliver. A handful of concurrent such uploads is sufficient to exhaust BEAM memory.
The function has had two names. From 0.10.0 to 2.0.0-pre.3 it is cowboy_req:part/3, reached through cowboy_req:part/1 and cowboy_req:part/2. From 2.0.0-pre.4 it is cowboy_req:read_part/3, reached through cowboy_req:read_part/1 and cowboy_req:read_part/2. Both have the same buffer loop.
This issue affects cowboy: from 0.10.0 before 2.15.0. |