| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: reserve space for the UTF-16 terminator in stream info
smb_strtoUTF16() always writes a terminating zero UTF-16 unit after the
converted characters, but get_file_stream_info() budgets only
sizeof(struct smb2_file_stream_info) + streamlen * 2 for a stream entry
and sizeof(struct smb2_file_stream_info) + 7 * 2 for the trailing
"::$DATA" entry. When an entry exactly fills the 448-byte small response
buffer, the terminator is written two bytes past the allocation.
Reserve one extra UTF-16 unit in both budget checks. The terminator is
not part of the wire format, so the reported lengths are unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: reject SetEA requests that do not fit the request buffer
CIFSSMBSetEA() copies the caller's extended attribute value into the
SMB request buffer without checking that it fits. The requirement is
stated in the source but was never implemented:
/*BB add length check to see if it would fit in
negotiated SMB buffer size BB */
/* if (ea_value_len > buffer_size - 512 (enough for header)) */
if (ea_value_len)
memcpy(parm_data->list.name + name_len + 1,
ea_value, ea_value_len);
The only bound applied on the way in is in cifs_xattr_set():
#define MAX_EA_VALUE_SIZE CIFSMaxBufSize
...
if (size > MAX_EA_VALUE_SIZE)
CIFSMaxBufSize is the full payload capacity of the buffer, so a value
of exactly that size leaves no room for the SMB header, the TRANS2
parameter block, the fealist header and the EA name that are written
ahead of it in the same object.
SendReceive() already enforces the correct limit on this very length:
if (in_len > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE)
but it is called after the copy has taken place. An unprivileged
setxattr(2) on an SMB1 mount with a 250-byte name and a 16384-byte
value writes 16384 bytes starting 345 bytes into a 16588-byte
cifs_request object, ending 141 bytes past it:
BUG: KASAN: slab-out-of-bounds in CIFSSMBSetEA+0xabc/0xde0
Write of size 16384 at addr ffff888003aa0159 by task init/68
__asan_memcpy+0x3c/0x60
CIFSSMBSetEA+0xabc/0xde0
cifs_xattr_set+0xd3a/0xff0
__vfs_setxattr+0x13e/0x1a0
The buggy address is located 345 bytes inside of
allocated 16588-byte region
Apply SendReceive()'s limit to the assembled request before the copy
rather than after it, and widen the byte counters so the sum cannot
wrap before it is tested.
byte_count is also tested against U16_MAX, because it is stored in the
16-bit pSMB->ByteCount. That becomes reachable when CIFSMaxBufSize is
raised at module load, where it may be set as high as 1024*127: with a
5-byte EA name and a 65521-byte value, count is exactly U16_MAX while
byte_count is 65556, and cpu_to_le16() would truncate it to 20 and
transmit a frame whose ByteCount does not match its length. Testing
byte_count covers count as well, since byte_count is the larger of the
two and count's only 16-bit consumer is written after this point.
check_add_overflow() is evaluated first so that total_len is assigned
before it is reported. |
| In descramble of multiple files, there is a possible out-of-bounds write due to improper casting. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| A vulnerability was found in bentoml OpenLLM 0.6.30. This affects the function async_run_command of the file src/openllm/common.py of the component Model Repository Directory Name Handler. Performing a manipulation of the argument cmd results in command injection. Attacking locally is a requirement. The exploit has been made public and could be used. The project was informed of the problem early through an issue report but has not responded yet. |
| In onOutputReceived of FrameDecoder.cpp, there is a possible out-of-bounds write due to a heap buffer overflow. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. |
| Improper Neutralization of Special Elements used in an OS Command (OS Command Injection) vulnerability in livebook-dev livebook allows command injection into generated deployment setup commands.
LivebookWeb.Hub.Teams.DeploymentGroupAgentComponent.docker_instructions/2 and LivebookWeb.Hub.Teams.DeploymentGroupAgentComponent.fly_instructions/4 in lib/livebook_web/live/hub/teams/deployment_group_agent_component.ex interpolate deployment group environment variable values into the generated Docker and Fly.io setup commands without shell escaping. The values originate from the deployment group configuration and reach the sinks through Livebook.Hubs.Dockerfile.online_docker_info/3.
Both sinks place the value inside a double-quoted shell word, so a value containing a command substitution such as $(...) or backticks is evaluated by the shell without any need to break out of the quoting, and a literal double quote terminates the quoted word and allows arbitrary further tokens. The generated command is displayed in the Livebook web interface with a copy button, so a user who copies it and runs it without reviewing it first executes the injected commands on their own machine, under their own account.
An attacker requires privileges sufficient to set deployment group environment variables, while the resulting code execution occurs on the machine of whoever runs the generated command. The Kubernetes instructions are not affected, because they render the same values into a YAML manifest with escaping rather than into a shell command.
This issue affects livebook: from 0.13.0 before 0.18.7 and from 0.19.0 before 0.19.9. |
| Improper neutralization of special elements used in an OS command ('OS command injection') vulnerability in TÜBİTAK BİLGEM Software Technologies Research Institute Pardus Boot Repair allows OS Command Injection.
This issue affects Pardus Boot Repair: from 1.0.8 before 1.0.9. |
| In Eclipse ThreadX NetX Duo versions up to and including 6.5.2.202603, the mDNS add-on's string cache accepts a shorter name as a match for a longer stored one. A host on the local link can send two mDNS records that make a device performing continuous service discovery write up to three bytes past its transmit packet, corrupting a neighbouring packet or the pool's free list, and misattribute discovered records. |
| Adobe Experience Manager is affected by an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability that could result in arbitrary code execution in the context of the current user. A low-privileged attacker could exploit this vulnerability to execute arbitrary code. Exploitation of this issue does not require user interaction. Scope is changed. |
| Dimension is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Adobe Framemaker is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Bridge is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| In the Wi-Fi NPU FW, there is a possible out-of-bounds write due to an incorrect bounds check. This could lead to local denial of service with user execution privileges needed. User interaction is not needed for exploitation. |
| An OS Command Injection vulnerability was discovered in the Google Cloud DNS validation module of the OPNsense os-acme-client plugin through 4.17. The DnsGcloud::prepare() method decodes the dns_gcloud_key model field and directly interpolates the string fields gcloud_account and gcloud_project into a shell command passed to proc_open() via LeUtils::run_shell_command() without any validation or escaping. A remote authenticated user with privileges to issue or renew certificates through the WebGUI/API can achieve arbitrary code execution as root. |
| bz2.BZ2Decompressor objects could be reused after a decompression error. If an application caught the resulting OSError and retried with the same decompressor, crafted input could cause the decompressor to resume from an invalid internal state and perform out-of-bounds writes to a stack buffer. This could crash the process when processing untrusted data. |
| A command injection vulnerability in Palo Alto Networks PAN-OS® software enables an authenticated administrator to bypass system restrictions and run arbitrary commands as a root user. To be able to exploit this issue, the user must have access to the PAN-OS management interface.
The security risk posed by this issue is significantly minimized by restricting access to the management interface to only trusted internal IP addresses according to our recommended best practice deployment guidelines https://live.paloaltonetworks.com/t5/community-blogs/tips-amp-tricks-how-to-secure-the-management-access-of-your-palo/ba-p/464431 .
This issue is applicable to PAN-OS software on PA-Series and VM-Series firewalls and on Panorama (virtual and M-Series).
Cloud NGFW and Prisma® Access are not affected by this vulnerability. |
| Issue summary: Parsing CMS AuthEnvelopedData or EnvelopedData message with
maliciously crafted AEAD parameters can trigger a stack buffer overflow.
Impact summary: A stack buffer overflow may lead to a crash, causing Denial
of Service, or potentially remote code execution.
When parsing CMS (Auth)EnvelopedData structures that use AEAD ciphers such as
AES-GCM, the IV (Initialization Vector) encoded in the ASN.1 parameters is
copied into a fixed-size stack buffer without verifying that its length fits
the destination. An attacker can supply a crafted CMS message with an
oversized IV, causing a stack-based out-of-bounds write before any
authentication or tag verification occurs.
Applications and services that parse untrusted CMS or PKCS#7 content using
AEAD ciphers (e.g., S/MIME (Auth)EnvelopedData with AES-GCM) are vulnerable.
Because the overflow occurs prior to authentication, no valid key material
is required to trigger it. While exploitability to remote code execution
depends on platform and toolchain mitigations, the stack-based write
primitive represents a severe risk.
The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this
issue, as the CMS implementation is outside the OpenSSL FIPS module
boundary.
OpenSSL 3.6, 3.5, 3.4, 3.3 and 3.0 are vulnerable to this issue.
OpenSSL 1.1.1 and 1.0.2 are not affected by this issue. |
| An out-of-memory flaw was found in libtiff that could be triggered by passing a crafted tiff file to the TIFFRasterScanlineSize64() API. This flaw allows a remote attacker to cause a denial of service via a crafted input with a size smaller than 379 KB. |
| The WP Travel Engine WordPress plugin before 6.8.1 does not properly validate the source of a user-supplied profile image path before moving the file, allowing authenticated users with subscriber-level access and above to relocate arbitrary files within the WordPress uploads directory into their own profile-image path. This removes the targeted media from its original location and can break content across the site. |
| The Prometheus rule conversion API endpoints in Grafana do not limit request body size, allowing authenticated users to trigger unbounded memory allocations that can crash the server through out-of-memory conditions. |