| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv4: add zero check for snd_cwnd_clamp
When RTAX_CWND is locked, user is able to pass 0 into it.
This could lead to writing 0 to tp->snd_cwnd, leading to a
division by zero error.
Oops: divide error: 0000 [#1] SMP KASAN NOPTI
Call Trace:
<IRQ>
tcp_reno_cong_avoid (net/ipv4/tcp_cong.c:510 (discriminator 1))
tcp_ack (net/ipv4/tcp_input.c:3517 net/ipv4/tcp_input.c:3873 net/ipv4/tcp_input.c:4440)
tcp_rcv_established (net/ipv4/tcp_input.c:6685)
tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1854)
tcp_v4_rcv (net/ipv4/tcp_ipv4.c:2248)
ip_protocol_deliver_rcu (net/ipv4/ip_input.c:207 (discriminator 1))
ip_local_deliver_finish (net/ipv4/ip_input.c:241 (discriminator 1))
ip_local_deliver (./include/linux/netfilter.h:325 ./include/linux/netfilter.h:319 net/ipv4/ip_input.c:262)
ip_rcv (./include/net/dst.h:481 (discriminator 6) net/ipv4/ip_input.c:492 (discriminator 6) ./include/linux/netfilter.h:325 (discriminator 6) ./include/li)
__netif_receive_skb_one_core (net/core/dev.c:6297 (discriminator 4))
__netif_receive_skb (net/core/dev.c:6410)
process_backlog (net/core/dev.c:6761)
__napi_poll.constprop.0 (net/core/dev.c:7830)
net_rx_action (net/core/dev.c:7893 net/core/dev.c:8050)
handle_softirqs (kernel/softirq.c:645)
__irq_exit_rcu (kernel/softirq.c:679 kernel/softirq.c:519 kernel/softirq.c:758)
irq_exit_rcu (kernel/softirq.c:775)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1062 (discriminator 35) arch/x86/kernel/apic/apic.c:1062 (discriminator 35))
RIP: 0010:tcp_cong_avoid_ai (net/ipv4/tcp_cong.c:482)
Fix by checking if user pass in zero as parameter and if lock is present. |
| In the Linux kernel, the following vulnerability has been resolved:
media: go7007: only set audio_enabled if go7007_snd_init() succeeded
go7007_register_encoder() sets go->audio_enabled before calling
go7007_snd_init() and discards its return value. go7007_snd_init()
assigns go->snd_context only on success, so a failed ALSA setup leaves
audio_enabled set with snd_context still NULL. The disconnect path tests
audio_enabled and calls go7007_snd_remove(), which dereferences
snd_context unconditionally.
go7007_snd_init() returns -ENODEV once its never-decremented static card
counter reaches SNDRV_CARDS, so SNDRV_CARDS attach/detach cycles arm the
next attach; no memory pressure is needed.
Set go->audio_enabled only once go7007_snd_init() has succeeded.
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Workqueue: usb_hub_wq hub_event
RIP: 0010:go7007_snd_remove (drivers/media/usb/go7007/snd-go7007.c:273)
Call Trace:
go7007_usb_disconnect (drivers/media/usb/go7007/go7007-usb.c:1336)
usb_unbind_interface (drivers/usb/core/driver.c:461)
device_remove (drivers/base/dd.c:618)
device_release_driver_internal (drivers/base/dd.c:1349)
bus_remove_device (drivers/base/bus.c:664)
device_del (drivers/base/core.c:3965)
usb_disable_device (drivers/usb/core/message.c:1478)
usb_disconnect
hub_event (drivers/usb/core/hub.c:5966)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
Kernel panic - not syncing: Fatal exception |
| In the Linux kernel, the following vulnerability has been resolved:
speakup: Fix NULL pointer dereference on VT switch + selection
When selecting/pasting very quickly after VT switch, the tty is not set
yet, leading to a NULL dereference. We can just abort the operation. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: require the dentry lease record to cover struct ceph_mds_reply_lease
parse_reply_info_lease() reads a 32-bit struct_len off the wire and only
checks that many bytes are present, without requiring struct_len to cover
sizeof(struct ceph_mds_reply_lease) (10 bytes). A malicious MDS can
declare a shorter record and still get the pointer published: the
following *p += sizeof(**lease) overshoot is undone by *p = lend, so
nothing downstream rejects the reply. ceph_fill_trace() ->
update_dentry_lease() then reads 10 bytes through that pointer on any
lookup on a mounted CephFS, running past the end of the message front.
Require the record to cover the structure, matching the sibling
parse_reply_info_dir(). A conforming MDS always encodes the full 10
bytes.
BUG: KASAN: slab-out-of-bounds in __update_dentry_lease.constprop.0 (fs/ceph/inode.c:1459)
Read of size 4 at addr ffff888026c63d65 by task kworker/0:3/2366
Workqueue: ceph-msgr ceph_con_workfn
Call Trace:
__update_dentry_lease.constprop.0 (fs/ceph/inode.c:1459)
ceph_fill_trace (fs/ceph/inode.c:1474 fs/ceph/inode.c:1823)
mds_dispatch (fs/ceph/mds_client.c:4229 fs/ceph/mds_client.c:7225)
ceph_con_process_message (net/ceph/messenger.c:1424)
ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430)
ceph_con_workfn (net/ceph/messenger.c:1576)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
The buggy address is located 357 bytes inside of
allocated 360-byte region [ffff888026c63c00, ffff888026c63d68) |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free after a failed durable reconnect
ksmbd_reopen_durable_fd() republishes a detached durable handle in the
reconnecting session's file table and takes no reference for that entry.
If smb2_open() then fails, cleanup relies on the final ksmbd_fd_put() to
remove the volatile id.
Two reconnects of the same handle can both take a lookup reference before
either attaches it. If the one that reopens first then fails and drops
its references first, the other request makes the final put through
ksmbd_put_durable_fd(). That frees the handle without removing the first
session's table entry, so tearing that session down writes to freed
memory.
BUG: KASAN: slab-use-after-free in __close_file_table_ids+0x14d/0x740 [ksmbd]
Call Trace:
__close_file_table_ids+0x14d/0x740 [ksmbd]
ksmbd_destroy_file_table+0x76/0x100 [ksmbd]
ksmbd_session_destroy+0xf8/0x480 [ksmbd]
ksmbd_dispose_sessions+0x13e/0x200 [ksmbd]
ksmbd_conn_sessions_cleanup+0x4c3/0x6d0 [ksmbd]
Freed by task 1030:
__ksmbd_close_fd+0x97d/0x1000 [ksmbd]
smb2_open+0x14eb/0xd9f0 [ksmbd]
Commit 3515503322f4 ("ksmbd: fix durable reconnect error path file
lifetime") handles a final put made by the reconnecting request, but not
one made by another holder.
Remove the volatile id under the file-table lock on this error path,
before the references are dropped, as ksmbd_close_fd() does on the
request_open path just above. Removal then no longer depends on which
holder makes the final put. The stale comment in the reconnect cleanup
is updated to match. A successful reconnect is unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix SMB2 CREATE response buffer overflow
smb2_allocate_rsp_buf() uses the MAX_CIFS_SMALL_BUFFER_SIZE
(448-byte) buffer for a single SMB2_CREATE response. That buffer also
holds a 4-byte length field, which only leaves 444 bytes for the SMB2
body.
The AAPL response made this buffer too small. After 8f1b796ff113, a
request with AAPL response contexts may need at least 456 bytes. In
the 456-byte case, create_aapl_rsp_buf() is appended last, clears 128
bytes, and writes 12 bytes past the allocation.
KASAN reports:
BUG: KASAN: slab-out-of-bounds in create_aapl_rsp_buf+0x31/0x6e0
Write of size 128 at addr ffff88800370954c by task kworker/0:0/9
...
create_aapl_rsp_buf+0x31/0x6e0
smb2_open+0x58f9/0xef10
...
smb2_allocate_rsp_buf+0x19d/0x370
...
The buggy address is located 332 bytes inside of
allocated 448-byte region [ffff888003709400, ffff8880037095c0)
Reserve enough space for any fixed CREATE response KSMBD can build.
Store the required allocation size in the per-dialect values table.
This keeps the small buffer for other commands and avoids using the max
transaction buffer for every CREATE. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix overflow in dacloffset bounds check in build_sec_desc()
When the large dacl_offset is provided, dacl_offset + sizeof(struct
smb_acl) overflows on 32-bit builds and the check is passed,
Which makes le16_to_cpu(ppdacl_ptr->size) read out-of-bounds. This
only happens for dacl_offset in range [0xFFFFFFF8, 0xFFFFFFFF]. So
the oob read is max 8 bytes preceding the allocated ppntsd.
unsigned int dacl_offset = le32_to_cpu(ppntsd->dacloffset);
int ppdacl_size, ntacl_size = ppntsd_size - dacl_offset;
if (!dacl_offset ||
(dacl_offset + sizeof(struct smb_acl) > ppntsd_size))
goto out;
Commit beff0bc9d69b ("ksmbd: fix overflow in dacloffset bounds check")
fixes similar checks in other functions. But leaves this one out,
because it is only valid for 32-bit builds.
Reproduced on 32-bit ARM with KASAN, by a client sending SMB2
SET_INFO(SEC) with dacloffset=0xfffffff8, then QUERY_INFO(SEC) on the
same file:
BUG: KASAN: slab-out-of-bounds in build_sec_desc (fs/smb/server/smbacl.c:1105)
Read of size 2 at addr c2a273fa by task kworker/1:1/35
CPU: 1 UID: 0 PID: 35 Comm: kworker/1:1 Not tainted 7.3.0-rc2+ #5
Workqueue: ksmbd-io handle_ksmbd_work
Call trace:
kasan_check_range from build_sec_desc (fs/smb/server/smbacl.c:1105)
build_sec_desc from smb2_query_info (fs/smb/server/smb2pdu.c:7676)
smb2_query_info from handle_ksmbd_work (fs/smb/server/server.c:160)
handle_ksmbd_work from process_one_work (kernel/workqueue.c:3401)
process_one_work from worker_thread (kernel/workqueue.c:3473)
worker_thread from kthread (kernel/kthread.c:436)
Add overflow check. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: bound mon_command ack decode to front len
handle_command_ack() bounds the decode with msg->front_alloc_len, the size
of the reply buffer, instead of msg->front.iov_len, the number of bytes the
monitor sent. mon_alloc_msg() routes every CEPH_MSG_MON_COMMAND_ACK to
get_generic_reply(), which returns the preallocated ->reply of whichever
generic request carries the same tid, so the buffer keeps its fixed size
however short the reply is. An ack with hdr.front_len below sizeof(struct
ceph_mon_request_header) + sizeof(u32), including 0, still passes
ceph_decode_need(), and ceph_decode_32() returns four bytes that were never
received: uninitialized slab memory, stale bytes of an earlier message, or
bytes the peer planted by sending a reply that lands in the same buffer and
is then rejected. The read stays within the allocation, so KASAN does not
flag it.
req->result reaches userspace through ceph_monc_do_statfs(),
ceph_monc_get_version() and ceph_monc_blocklist_add(); rbd hands it back
from write() on /sys/bus/rbd/add_single_major, and rbd_get_client() passes
it to ERR_PTR() unchecked, which faults:
rbd: failed to get latest osdmap: -186318427
BUG: unable to handle page fault for address: fffffbfffe9ca034
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:do_rbd_add (drivers/block/rbd.c:7105)
Call Trace:
...
kernfs_fop_write_iter (fs/kernfs/file.c:345)
vfs_write (fs/read_write.c:595 fs/read_write.c:687)
ksys_write (fs/read_write.c:739)
do_syscall_64 (arch/x86/entry/syscall_64.c:61 arch/x86/entry/syscall_64.c:84)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Kernel panic - not syncing: Fatal exception
Use msg->front.iov_len, matching handle_subscribe_ack(),
handle_statfs_reply(), handle_get_version_reply() and handle_auth_reply().
A well-formed ack has front.iov_len >= 22 and is unaffected; a short one
takes the existing bad: path. This applies commit d3c32939fa0e ("libceph:
bound get_version reply decode to front len") to the last decode-side
use of front_alloc_len in this file. |
| In the Linux kernel, the following vulnerability has been resolved:
media: em28xx: reject audio endpoint with zero packet size
em28xx_audio_urb_init() divides by the audio endpoint's wMaxPacketSize
without checking it, so a USB device that declares a zero-sized audio
endpoint divides by zero at probe time.
Reject a zero-sized audio endpoint like a missing one; the caller already
unwinds on a negative return.
Oops: divide error: 0000 [#1] SMP NOPTI
Workqueue: usb_hub_wq hub_event
RIP: 0010:em28xx_audio_init (drivers/media/usb/em28xx/em28xx-audio.c:718)
Call Trace:
em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248)
em28xx_init_dev.isra.0 (drivers/media/usb/em28xx/em28xx-cards.c:3887)
em28xx_usb_probe (drivers/media/usb/em28xx/em28xx-cards.c:4258)
usb_probe_interface (drivers/usb/core/driver.c:396)
...
usb_set_configuration (drivers/usb/core/message.c:2268)
usb_generic_driver_probe (drivers/usb/core/generic.c:250)
usb_probe_device (drivers/usb/core/driver.c:291)
...
usb_new_device (drivers/usb/core/hub.c:2703)
hub_event (drivers/usb/core/hub.c:5961)
process_one_work (kernel/workqueue.c:3322)
worker_thread (kernel/workqueue.c:3486)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
Kernel panic - not syncing: Fatal exception |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_net: atomically disable rx mode work
virtio-net uses a boolean to gate rx_mode_work during device teardown.
The flag is changed under RTNL, but ndo_set_rx_mode checks it under the
address-list lock. A callback can therefore pass the check and enqueue work
after teardown has flushed it. The work is also enabled before late
probe operations that can fail, allowing probe unwind to free the netdev
with work still queued.
KASAN reports the worker using a virtqueue that probe unwind already freed:
BUG: KASAN: slab-use-after-free in virtqueue_add_split
Workqueue: events virtnet_rx_mode_work
Call Trace:
virtqueue_add_split (drivers/virtio/virtio_ring.c:706)
virtqueue_add_sgs (drivers/virtio/virtio_ring.c:2839)
virtnet_send_command_reply (drivers/net/virtio_net.c:3565)
virtnet_rx_mode_work (drivers/net/virtio_net.c:3833)
process_one_work (kernel/workqueue.c:3322)
worker_thread (kernel/workqueue.c:3405)
Freed by task 119:
kfree (mm/slub.c:6625)
vp_del_vq.isra.0 (drivers/virtio/virtio_pci_common.c:259)
vp_del_vqs (drivers/virtio/virtio_pci_common.c:285)
virtnet_probe (drivers/net/virtio_net.c:7129)
Use the workqueue disable mechanism to atomically reject new queue attempts
and drain running work. Keep work disabled until probe succeeds or restore
has reattached the netdev, then enable it and replay receive-mode state for
a running interface. Disable it before resource teardown in freeze and
remove. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-rdma: reject short connection requests
nvmet_rdma_parse_cm_connect_req() treats RDMA-CM private data as a
struct nvme_rdma_cm_req but accepts any nonzero private_data_len. The
iWARP path allocates exactly the peer-provided length, so a six-byte MPA
request reaches the parser and the hsqsize load reads two bytes past the
allocation.
Require the complete request structure before reading any of its fields.
The decoded KASAN report is:
BUG: KASAN: slab-out-of-bounds in nvmet_rdma_cm_handler
(drivers/nvme/target/rdma.c:1427 drivers/nvme/target/rdma.c:1475
drivers/nvme/target/rdma.c:1614 drivers/nvme/target/rdma.c:1814)
Read of size 2 at addr ff1100010459d366 by task kworker/u16:1/41
Workqueue: iw_cm_wq cm_work_handler
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
nvmet_rdma_cm_handler
(drivers/nvme/target/rdma.c:1427 drivers/nvme/target/rdma.c:1475
drivers/nvme/target/rdma.c:1614 drivers/nvme/target/rdma.c:1814)
cma_cm_event_handler (drivers/infiniband/core/cma.c:2181)
iw_conn_req_handler (drivers/infiniband/core/cma.c:2640)
cm_work_handler
(drivers/infiniband/core/cm.c:2502
drivers/infiniband/core/cm.c:3858)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
</TASK>
Allocated by task 12:
__kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415)
__kmalloc_node_track_caller_noprof
(mm/slub.c:5414 mm/slub.c:5545)
kmemdup_noprof (mm/util.c:138)
cm_event_handler
(drivers/infiniband/core/iwcm.c:194
drivers/infiniband/core/iwcm.c:1076)
siw_cm_upcall (drivers/infiniband/sw/siw/siw_cm.c:408)
siw_proc_mpareq (drivers/infiniband/sw/siw/siw_cm.c:750)
siw_cm_work_handler (drivers/infiniband/sw/siw/siw_cm.c:1086)
The buggy address is located 0 bytes to the right of
allocated 6-byte region [ff1100010459d360, ff1100010459d366) |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix integer overflow in the snap trace bounds check
ceph_update_snap_trace() bounds the two encoded snapid arrays that follow a
struct ceph_mds_snap_realm with sizeof(u64) * (num_snaps +
num_prior_parent_snaps). Both counts come straight off the wire as __le32,
so the addition is evaluated in unsigned int and wraps before sizeof(u64)
promotes it to size_t: an MDS sending num_snaps = 1 and
num_prior_parent_snaps = 0xffffffff makes the sum zero and the check
degenerates to ceph_decode_need(&p, e, 0, bad), which always passes.
dup_array() then reads num_snaps * 8 bytes past the end of the message
front, which ceph_msg_new2() allocates at exactly front_len bytes. An
unsolicited CEPH_MSG_CLIENT_SNAP reaches this from a malicious or
compromised MDS with no client-side action, as do the snaptraces carried in
an MDS reply and in a cap import.
Compute the length with size_add()/size_mul() so it saturates at SIZE_MAX
instead of wrapping, in the style fs/ceph/mdsmap.c already uses for
num_export_targets.
BUG: KASAN: slab-out-of-bounds in dup_array (include/linux/unaligned.h:28 fs/ceph/snap.c:500)
Read of size 8 at addr ffff8880102a16c8 by task kworker/1:2/129
Workqueue: ceph-msgr ceph_con_workfn
Call Trace:
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
dup_array (include/linux/unaligned.h:28 fs/ceph/snap.c:500)
ceph_update_snap_trace (fs/ceph/snap.c:836)
ceph_handle_snap (fs/ceph/snap.c:1155)
mds_dispatch (fs/ceph/mds_client.c:7234)
ceph_con_process_message (net/ceph/messenger.c:1424)
ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430)
ceph_con_workfn (net/ceph/messenger.c:1576)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
...
The buggy address is located 0 bytes to the right of
allocated 72-byte region [ffff8880102a1680, ffff8880102a16c8) |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: reject mdsmaps that claim more than CEPH_MAX_MDS ranks
check_new_map() sizes its export-target bitmap from CEPH_MAX_MDS but walks
it with newmap->possible_max_rank, which comes straight off the wire:
ceph_mdsmap_decode() sets it to max(m_num_active_mds, m_max_mds), then
overwrites it with the size of the "in" set. Neither is bounded by
CEPH_MAX_MDS, only by m_info allocating, so a monitor announcing more ranks
than the bitmap holds makes test_bit() read past the end of targets[]. The
clear_bit() loop above indexes the same bitmap, though it is additionally
bounded by mdsc->max_sessions. The map arrives on the monitor connection,
which is unauthenticated in legacy msgr mode.
CEPH_MAX_MDS is a protocol constant from src/mds/mdstypes.h, and the
reserved inode ranges in super.h are laid out one rank apart over that
span, so a map claiming more ranks is corrupt. Reject it where the rank
space is established rather than letting the count reach check_new_map().
BUG: KASAN: stack-out-of-bounds in check_new_map (fs/ceph/mds_client.c:5968)
Read of size 8 at addr ffffc90000ac7798 by task kworker/1:2/127
Workqueue: ceph-msgr ceph_con_workfn
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
kasan_check_range (mm/kasan/generic.c:186 mm/kasan/generic.c:200)
check_new_map (fs/ceph/mds_client.c:5968)
ceph_mdsc_handle_mdsmap (fs/ceph/mds_client.c:7060)
extra_mon_dispatch (fs/ceph/super.c:802)
mon_dispatch (net/ceph/mon_client.c:1483)
ceph_con_process_message (net/ceph/messenger.c:1424)
ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430)
ceph_con_workfn (net/ceph/messenger.c:1576)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
</TASK>
The buggy address belongs to stack of task kworker/1:2/127
and is located at offset 288 in frame:
check_new_map (fs/ceph/mds_client.c:5846)
This frame has 1 object:
[32, 288) 'targets' |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: hold cl_lock in client_has_openowners()
client_has_openowners() walks clp->cl_openowners and reads so_stateids
without clp->cl_lock. nfs4_put_stateowner() unhashes that openowner under
cl_lock and then frees it, so a concurrent EXCHANGE_ID with mismatched
creds can use-after-free the nfs4_openowner.
BUG: KASAN: slab-use-after-free in client_has_state+0x10a/0x140
fs/nfsd/nfs4state.c:3718 client_has_openowners()
nfsd4_exchange_id
nfsd4_proc_compound
nfsd_dispatch
svc_process
Take clp->cl_lock while client_has_openowners() walks the openowner
list. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix app-instance non-durable supersede session UAF
ksmbd_close_fd_app_instance_id() supersedes a prior open that has the
same AppInstanceId. It reaches that open's session through opinfo->sess.
This pointer is not refcounted.
Session teardown detaches durable handles before it frees the session.
It does not detach a non-durable open. That open still points at the
session through opinfo->sess after the session is freed. Another session
can supersede the open at the same time. The supersede then takes a
write lock through the stale pointer, in the freed session's file table.
BUG: KASAN: slab-use-after-free in _raw_write_lock+0x71/0xd0
Call Trace:
_raw_write_lock+0x71/0xd0
ksmbd_close_fd_app_instance_id+0xd9/0x670 [ksmbd]
smb2_open+0x3e10/0xd910 [ksmbd]
Freed by task 212:
ksmbd_session_destroy+0x38d/0x480 [ksmbd]
Fix this by looking the session up by opinfo->session_id. The lookup
returns a reference, as smb2_break_collect_channels() does. Recheck that
opinfo->sess still points at it before using it.
Do the lookup without m_lock held. destroy_previous_session() takes
m_lock under the session table lock, and taking them in the other order
here would deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix slab-out-of-bounds write in id_mode_to_cifs_acl()
In id_mode_to_cifs_acl(), while the chown branch reserves
sizeof(struct smb_ntsd) + 2 * sizeof(struct smb_sid) (plus
sizeof(struct smb_acl) and the worst-case ACE space after
commit 0ee150794c75 ("smb: client: fix heap overflow in DACL owner/group
rewrite")), the chmod branch only adds 2 * sizeof(struct smb_ace) or
5 * sizeof(struct smb_ace) to secdesclen (or 1 * sizeof(struct smb_ace)
on posix).
However, the chmod branch also invokes build_sec_desc() ->
copy_sec_desc(), which unconditionally writes the Owner SID at
pnntsd + sidsoffset and the Group SID at
pnntsd + sidsoffset + sizeof(struct smb_sid) (2 * 68 = 136 bytes total),
and set_chmod_dacl() always writes a struct smb_acl header (8 bytes)
even when the source descriptor has dacloffset == 0. When a security
descriptor has compact or overlapping Owner/Group SIDs (or
dacloffset == 0), calling chmod() under-allocates pnntsd and writes past
the end of the slab buffer.
Reserve sizeof(struct smb_acl) + 2 * sizeof(struct smb_sid) (plus
sizeof(struct smb_ntsd) on the posix path) in the chmod branch of
id_mode_to_cifs_acl(). |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
xen-netback: Zero out sring pointers on unmap
If xenvif_map_frontend_data_rings() fails when a ring is already mapped,
it unmaps them via xenvif_unmap_frontend_data_rings() which keeps the
ring pointers unchanged. xenvif_connect_data()'s cleanup path calls
xenvif_disconnect_queue() which in turn calls
xenvif_unmap_frontend_data_rings() again, which will attempt to unmap the
pointers a second time.
Zero out the ring pointers after they are unmapped to avoid this issue.
This is XSA-532 |
| In the Linux kernel, the following vulnerability has been resolved:
xen-netback: Fix XenBus connection failure cleanup
xenvif_get_stats and xenvif_get_ethtool_stats capture vif->num_queues
under rcu_read_lock. We need to unpublish vif->num_queues before
synchronize_net to ensure that readers that come afterwards will not
read a non-zero vif->num_queues and attempt to access invalid queues.
This is the same cleanup algorithm as used in backend_disconnect and
added in commit b17075d5c198 ("xen-netback: fix race condition on XenBus
disconnect").
This is XSA-531 |
| In the Linux kernel, the following vulnerability has been resolved:
inet: reject unhashed sockets during established lookups
TCP established ehash lookups are lockless. The socket caches involved
use SLAB_TYPESAFE_BY_RCU, so memory can be reused before an RCU reader
that retained its old address has finished.
After a tuple match, __inet_lookup_established() and
__inet6_lookup_established() acquire a reference and repeat the tuple
check. They do not check whether the new object is hashed. If the
address is reused for a socket with the same tuple, the lookup can
acquire a reference to the new object and return it while its nulls node
is unhashed.
A PoC that drives reuse with a SYN cookie request socket reproduced the
crash. The new request socket is unhashed and has a NULL rsk_listener.
A lookup that had loaded the address of the old request socket acquired
the reference published by tcp_get_cookie_sock() and returned the new
object. tcp_v4_rcv() then read sk_state through the NULL listener.
The resulting crash was:
BUG: kernel NULL pointer dereference, address: 0000000000000012
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
...
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 4 UID: 0 PID: 0 Comm: swapper/4 Not tainted 7.3.0-00591-g0e135910deec #1 PREEMPT(lazy)
...
RIP: 0010:tcp_v4_rcv+0x44e/0x1280
...
R10: 0000000000000001 R11: 00000000024ca8c0 R12: 0000000000000000
...
CR2: 0000000000000012 CR3: 0000000103d50004 CR4: 0000000000770ef0
...
Call Trace:
<IRQ>
? raw_local_deliver+0xae/0x240
ip_protocol_deliver_rcu+0x2d/0x180
ip_local_deliver_finish+0x84/0x100
ip_sublist_rcv_finish+0x5f/0x70
ip_sublist_rcv+0x12a/0x1d0
ip_list_rcv+0xfd/0x130
__netif_receive_skb_list_core+0x223/0x250
netif_receive_skb_list_internal+0x1d2/0x2c0
? try_fill_recv+0x39/0x7b0
napi_complete_done+0x74/0x170
virtnet_poll+0x445/0x600
__napi_poll+0x27/0x1e0
net_rx_action+0x2fe/0x3b0
handle_softirqs+0xc2/0x2c0
__irq_exit_rcu+0x74/0xd0
common_interrupt+0x7f/0x90
</IRQ>
...
Kernel panic - not syncing: Fatal exception in interrupt
After taking a reference, check whether the nulls node is unhashed in
both IPv4 and IPv6 established lookups. If it is unhashed or the tuple
no longer matches, drop the reference and restart the lookup.
Lookups racing with the TIME_WAIT hashdance, or with a request being
replaced by its child, now restart and find the new socket instead of
returning the old one.
Request sockets that were never inserted into ehash can have a nonzero
refcount, and a stale lookup can hold a transient reference. Therefore,
when SYN cookie, Fast Open, and request migration paths fail after
setting a nonzero refcount, release the references held by those paths
with reqsk_put() instead of freeing the request directly. |