Export limit exceeded: 428751 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (428751 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64544 | 1 Linux | 1 Linux Kernel | 2026-11-17 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: asymmetric_keys - fix OOB read in pefile_digest_pe_contents pefile_digest_pe_contents() computes the trailing-data hash length as pelen - (hashed_bytes + certs_size). A crafted PE can make the addition exceed pelen, causing the unsigned subtraction to underflow to ~4 GiB. This is passed to crypto_shash_update() which reads out of bounds and panics on unmapped vmalloc guard pages. BUG: unable to handle page fault for address: ffffc900038d8000 Oops: Oops: 0000 [#1] SMP KASAN NOPTI RIP: 0010:sha256_blocks_generic (lib/crypto/sha256.c:152) Call Trace: <TASK> __sha256_update (lib/crypto/sha256.c:208) crypto_sha256_update (crypto/sha256.c:142) verify_pefile_signature (crypto/asymmetric_keys/verify_pefile.c:436) kexec_kernel_verify_pe_sig (kernel/kexec_file.c:151) __do_sys_kexec_file_load (kernel/kexec_file.c:406) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) </TASK> Kernel panic - not syncing: Fatal exception Validate that the addition does not overflow and the result does not exceed pelen before the subtraction. Return -ELIBBAD on failure. | ||||
| CVE-2026-64553 | 1 Linux | 1 Linux Kernel | 2026-11-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: psample: fix info leak in PSAMPLE_ATTR_DATA psample open codes nla_put() presumably to avoid wiping the data with 0s just to override it with packet data. This open coding is missing clearing the pad, however, each netlink attr is padded to 4B and data_len may not be divisible by 4B. | ||||
| CVE-2026-77941 | 1 Autodesk | 1 Autocad | 2026-11-17 | 3.3 Low |
| A maliciously crafted DWG or DXF file containing an external reference with an attacker-controlled network path, when parsed through Autodesk AutoCAD, can force an Information Disclosure vulnerability. A malicious actor can leverage this vulnerability to disclose NTLM authentication information from the current user. | ||||
| CVE-2026-77944 | 1 Autodesk | 1 Autocad | 2026-11-17 | 3.3 Low |
| A maliciously crafted DXF file containing a scene-background object with an attacker-controlled network path, when parsed through Autodesk AutoCAD, can force an Information Disclosure vulnerability. A malicious actor can leverage this vulnerability to disclose NTLM authentication information from the current user. | ||||
| CVE-2026-28273 | 1 Zoneminder | 1 Zoneminder | 2026-11-17 | 9.9 Critical |
| ZoneMinder is a free, open source closed-circuit television software application. Prior to 1.38.4, any authenticated user can use the /api/configs/edit/{name}.json endpoint to modify protected configuration settings because ConfigsController::edit() does not enforce the System=Edit authorization requirement and its system-variable protection is ineffective. An attacker can set ZM_PATH_FFMPEG to a command-bearing value and trigger an exec() sink in web/views/image.php or web/includes/Event.php by requesting frame extraction. This permits arbitrary command execution with the privileges of the web server user and can expose private camera feeds, recordings, and database data or establish persistence. This issue is fixed in version 1.38.4. | ||||
| CVE-2026-77940 | 1 Autodesk | 1 Autocad | 2026-11-17 | 3.3 Low |
| A maliciously crafted DWG file containing an attacker-controlled network path, when parsed through Autodesk AutoCAD, can force an Information Disclosure vulnerability. A malicious actor can leverage this vulnerability to disclose NTLM authentication information from the current user. | ||||
| CVE-2026-93298 | 1 Autodesk | 1 Autocad | 2026-11-17 | 5.5 Medium |
| A maliciously crafted DXF file containing crafted VBA project data, when parsed through Autodesk AutoCAD, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to read sensitive data from process memory. | ||||
| CVE-2026-95849 | 1 Linkwarden | 1 Linkwarden | 2026-11-17 | 6.8 Medium |
| Linkwarden is a self-hosted, open-source collaborative bookmark manager to collect, organize and archive webpages. Prior to 2.15.0, .github/workflows/check-branch.yml runs on the privileged pull_request_target event and interpolates the attacker-controlled github.head_ref source branch name unquoted into a run: shell script. An unauthenticated attacker can open a pull request from a fork with shell metacharacters in its branch name, causing arbitrary commands to execute in the base repository's privileged CI job before the branch comparison result matters. The job has access to GITHUB_TOKEN and any exposed secrets, allowing secret exfiltration and, when workflow token permissions allow repository writes, modification of repository content. This issue is fixed in version 2.15.0. | ||||
| CVE-2026-95822 | 1 Zephyrproject | 1 Zephyr | 2026-11-17 | 3.3 Low |
| The SOCKS5 client in subsys/net/lib/socks/socks.c built the CONNECT request in socks5_tcp_connect() by choosing the SOCKS5 address type from the address family of the proxy (proxy->sa_family) while reading the bytes out of the destination address supplied to connect(). A SOCKS5 request encodes the destination independently of the transport used to reach the proxy, so the two families are unrelated and nothing in the path forces them to agree: set_context_proxy() only requires the proxy family to match the socket, and zsock_connect_ctx() enters the SOCKS branch before any destination validation. With an IPv6 proxy and an AF_INET destination the code treated an 8-byte struct net_sockaddr_in as a struct net_sockaddr_in6 and copied the 16-byte sin6_addr from it, reading 12 bytes past the end of the object and transmitting them to the proxy. With CONFIG_USERSPACE enabled, z_vrfy_zsock_connect() copies only addrlen user bytes into a stack-resident struct net_sockaddr_storage and enforces no per-family minimum length, so the oversized read stays within the storage but returns stale, uninitialised kernel-stack bytes. An unprivileged user-mode thread can therefore open an AF_INET6 stream socket, point setsockopt(SO_SOCKS5) at a proxy it controls, and call connect() with a short AF_INET destination to have the kernel send it 12 bytes of supervisor stack residue per attempt. Without CONFIG_USERSPACE the read runs past the end of the caller's own struct net_sockaddr_in, disclosing adjacent memory to the proxy; the family mismatch can arise unintentionally when a destination is obtained from DNS while an IPv6 proxy is configured. Impact is limited to information disclosure of at most 12 bytes per connect() call, with no write primitive; the leak is delivered to whoever operates the SOCKS5 proxy. The mirrored pairing (IPv6 destination through an IPv4 proxy) is memory-safe but encoded the destination as SOCKS5_ATYP_IPV4 from the first four bytes of the IPv6 address, causing the proxy to connect to an unrelated host. Exploitation requires the non-default CONFIG_SOCKS option, a socket with SO_SOCKS5 configured, and both IPv4 and IPv6 support in the image. The fix moves the encoding into a helper that selects the address type from dest->sa_family and validates dest_len against the matching struct net_sockaddr_in/struct net_sockaddr_in6 before copying, rejecting under-length or unsupported destinations with an error. | ||||
| CVE-2026-17312 | 1 Ibm | 1 Api Connect | 2026-11-17 | 5.4 Medium |
| IBM API Connect 12.1.0.0 through 12.1.1.2 could allow a remote attacker to force a user to authenticate into an attacker-controlled account due to cross-site request forgery. The sign-in flow does not sufficiently verify that a login response belongs to the user's own request, which could link the victim's session to an account controlled by the attacker. | ||||
| CVE-2026-17313 | 1 Ibm | 1 Api Connect | 2026-11-17 | 9.8 Critical |
| IBM API Connect 12.1.0.0 through 12.1.1.2 could allow a remote attacker to obtain sensitive information and take control of gateway configuration due to authentication bypass via an alternate path. | ||||
| CVE-2026-17311 | 1 Ibm | 1 Api Connect | 2026-11-17 | 7.1 High |
| IBM API Connect 12.1.0.0 through 12.1.1.2 could allow a remote authenticated attacker to modify application API subscriptions due to broken object-level authorization. | ||||
| CVE-2026-102618 | 1 Ibm | 1 I | 2026-11-17 | 3.6 Low |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow an authenticated user to indirectly disable system auditing, which they otherwise don't have authority to disable. | ||||
| CVE-2026-103320 | 1 Ibm | 2 Websphere Application Server, Websphere Application Server Liberty | 2026-11-17 | 4.3 Medium |
| IBM WebSphere Application Server Liberty 17.0.0.3 through 26.0.0.10 could allow an authenticated user with the Reader role to obtain sensitive information. | ||||
| CVE-2026-108284 | 1 Ibm | 2 Websphere Application Server, Websphere Application Server Liberty | 2026-11-17 | 6.5 Medium |
| IBM WebSphere Application Server Liberty 17.0.0.3 through 26.0.0.10 could allow an authenticated user with the Reader role to obtain sensitive information. | ||||
| CVE-2026-11547 | 1 Ibm | 2 Websphere Application Server, Websphere Application Server Liberty | 2026-11-17 | 4.3 Medium |
| IBM WebSphere Application Server Liberty 17.0.0.3 through 26.0.0.10 is affected by a server-side request forgery vulnerability in the Admin Center deploy validation endpoint. | ||||
| CVE-2026-77153 | 1 Ibm | 1 I | 2026-11-17 | 4.8 Medium |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote unauthenticated attacker to obtain sensitive information from the Host-Based Printer Subsystem due to no authorization check. A bad actor could use this vulnerability to print files they should not be able to access. | ||||
| CVE-2026-17308 | 1 Ibm | 1 Api Connect | 2026-11-17 | 6.8 Medium |
| IBM API Connect 12.1.0.0 through 12.1.1.2 could allow a remote attacker to obtain sensitive credentials and manipulate tool responses due to improper certificate validation. | ||||
| CVE-2026-126422 | 2 Open-emr, Openemr | 2 Openemr, Openemr | 2026-11-17 | 4.3 Medium |
| OpenEMR before 8.5.0 contains a missing authorization vulnerability in library/ajax/lists_touch.php that allows restricted authenticated users to mark another patient's clinical lists as reviewed. Attackers can submit arbitrary patient_id and type values to falsely record "None known" allergy, medication, or problem lists, misleading clinicians and skewing quality-measure calculations. | ||||
| CVE-2026-76305 | 1 Splunk | 2 Soar, Splunk | 2026-11-17 | 6.5 Medium |
| In Splunk SOAR versions below 8.7.0, an authenticated user who does not hold a role with permission to view apps could download an archive of an installed app. This could expose all data in the app archive, including proprietary source code and sensitive information. The vulnerability is possible because Splunk SOAR does not verify permission to view apps before it returns the app archive. For more information see Export or import an app (https://help.splunk.com/en/splunk-soar/soar-on-premises/develop-apps/8.4.0/develop-an-app-using-the-splunk-soar-app-wizard/export-or-import-an-app) and Manage roles and permissions in Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/8.5.0/manage-your-splunk-soar-on-premises-users-and-accounts/manage-roles-and-permissions-in-splunk-soar-on-premises) in the Splunk documentation. | ||||