Search Results (112363 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-124576 1 Beikeshop 1 Beikeshop 2026-11-12 7.3 High
A security flaw has been discovered in BeikeShop up to 2.0.0.31. Impacted is the function OrderRepo::getOrderByNumber of the file beike/Repositories/OrderRepo.php of the component Guest Order Lookup. Performing a manipulation of the argument order_number results in enforcement of behavioral workflow. The attack can be initiated remotely. Upgrading to version 2.0.0.32 is recommended to address this issue. The patch is named 6cf25f8c15d27d1ff14a848faf645c94d20ba5f1. It is recommended to upgrade the affected component.
CVE-2026-63838 1 Linux 1 Linux Kernel 2026-11-12 7.1 High
In the Linux kernel, the following vulnerability has been resolved: ASoC: rsnd: Fix potential out-of-bounds access of component_dais[] component_dais[RSND_MAX_COMPONENT] is initially zero-initialized and later populated in rsnd_dai_of_node(). However, the existing boundary check: if (i >= RSND_MAX_COMPONENT) does not guarantee that the last valid element remains zero. As a result, the loop can rely on component_dais[RSND_MAX_COMPONENT] being zero, which may lead to an out-of-bounds access. Found by Linux Verification Center (linuxtesting.org) with SVACE.
CVE-2026-63827 1 Linux 1 Linux Kernel 2026-11-12 7.8 High
In the Linux kernel, the following vulnerability has been resolved: apparmor: fix use-after-free in rawdata dedup loop aa_replace_profiles() walks ns->rawdata_list to dedup the incoming policy blob against entries already attached to existing profiles. Per the kernel-doc on struct aa_loaddata, list membership does not hold a reference: profiles hold pcount, and when the last pcount drops, do_ploaddata_rmfs() is queued on a workqueue that takes ns->lock and removes the entry. Between dropping the last pcount and the workqueue running, an entry remains on the list with pcount == 0. aa_get_profile_loaddata() is an unconditional kref_get() on pcount, so when the dedup loop hits such an entry, refcount hardening reports refcount_t: addition on 0; use-after-free. inside aa_replace_profiles(), and the poisoned counter then trips "saturated" and "underflow" warnings on the subsequent uses of the same loaddata. Before commit a0b7091c4de4 ("apparmor: fix race on rawdata dereference") the dedup path used a get_unless_zero-style helper on a single counter, so the existing "if (tmp)" guard was meaningful. The split-refcount refactor introduced aa_get_profile_loaddata(), which has plain kref_get() semantics, and the guard quietly became a no-op. Introduce aa_get_profile_loaddata_not0(), matching the existing _not0 convention used by aa_get_profile_not0(), and use it for the rawdata_list dedup lookup so dying entries are skipped. Reproduced on x86_64 with v7.1-rc5 in QEMU+KVM running Ubuntu 24.04 + stress-ng 0.17.06: stress-ng --apparmor 1 --klog-check --timeout 60s Without this patch the three refcount_t warnings fire within a few seconds. With it the same 60 s run is clean. Coverage is a smoke-test only; a longer soak with CONFIG_KASAN, CONFIG_KCSAN and CONFIG_PROVE_LOCKING would be welcome from anyone with the cycles.
CVE-2026-118039 1 Progress 1 Telerik Document Processing Libraries 2026-11-12 7.5 High
In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, an XML external entity reference vulnerability in SVG image processing allows an unauthenticated attacker to read local files on the server via a crafted SVG image with a nested embedded SVG, when the image is processed or exported to PDF.
CVE-2026-118038 1 Progress 1 Telerik Document Processing Libraries 2026-11-12 7.1 High
In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, a path traversal vulnerability in the Convert and Merge AI agent tools allows an authenticated attacker with low privileges who can supply tool arguments to read files outside the configured output directory, and to overwrite such files where they are writable, via relative file paths that resolve against the process current working directory.
CVE-2026-63974 1 Linux 1 Linux Kernel 2026-11-12 8.8 High
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Set HCI_CMD_DRAIN_WORKQUEUE during device close Since hci_dev_close_sync() can now be called during the reset path, we should also set HCI_CMD_DRAIN_WORKQUEUE. This avoids queuing timeouts while the hdev workqueue is being drained.
CVE-2026-118037 1 Progress 1 Telerik Document Processing Libraries 2026-11-12 7.5 High
In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, uncontrolled recursion, infinite loop, unchecked loop condition and inefficient regular expression vulnerabilities in RadSpreadProcessing and RadSpreadStreamProcessing allow an unauthenticated attacker to terminate or hang the host process via a crafted XLSX or XLS workbook or formula.
CVE-2017-6320 1 Barracuda 1 Load Balancer Adc Firmware 2026-11-12 8.8 High
A remote command injection vulnerability exists in the Barracuda Load Balancer product line (confirmed on v5.4.0.004 (2015-11-26) and v6.0.1.006 (2016-08-19); fixed in 6.1.0.003 (2017-01-17)) in which an authenticated user can execute arbitrary shell commands and gain root privileges. The vulnerability stems from unsanitized data being processed in a system call when the delete_assessment command is issued.
CVE-2026-118036 1 Progress 1 Telerik Document Processing Libraries 2026-11-12 7.5 High
In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, uncontrolled recursion, infinite loop, inefficient algorithmic complexity and resource allocation vulnerabilities in RadPdfProcessing and AI document summarization and question answering allow an unauthenticated attacker to terminate or hang the host process via a crafted PDF document or document text submitted for summarization or question answering.
CVE-2026-118035 1 Progress 1 Telerik Document Processing Libraries 2026-11-12 7.5 High
In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, uncontrolled recursion, inefficient algorithmic complexity and infinite loop vulnerabilities in RadWordsProcessing allow an unauthenticated attacker to terminate or hang the host process via a crafted DOCX, DOC, RTF or HTML document.
CVE-2026-63826 1 Linux 1 Linux Kernel 2026-11-12 7.8 High
In the Linux kernel, the following vulnerability has been resolved: fbdev: fix use-after-free in store_modes() store_modes() replaces a framebuffer's modelist with modes from userspace. On success it frees the old modelist with fb_destroy_modelist(). Two fields still point into that freed list. One pointer is fb_display[i].mode, the mode a console is using. fbcon_new_modelist() moves these pointers to the new list. It only does so for consoles still mapped to the framebuffer. An unmapped console is skipped and keeps its stale pointer. Unbinding fbcon, for example, sets con2fb_map[i] to -1 but leaves fb_display[i].mode set. An FBIOPUT_VSCREENINFO ioctl with FB_ACTIVATE_INV_MODE later reaches fbcon_mode_deleted(). That function reads the stale fb_display[i].mode through fb_mode_is_equal(). The read is a use-after-free. The other pointer is fb_info->mode, the current mode. It is set through the mode sysfs attribute. store_modes() does not update fb_info->mode, so it is left pointing into the freed list. show_mode(), the attribute's read handler, dereferences the stale fb_info->mode through mode_string(). The read is a use-after-free. Clear both pointers before freeing the list. Commit a1f305893074 ("fbcon: Set fb_display[i]->mode to NULL when the mode is released") added the helper fbcon_delete_modelist(). It clears every fb_display[i].mode that points into a given list. So far it is called only from the unregister path. Call it from store_modes() too, and set fb_info->mode to NULL.
CVE-2026-63822 1 Linux 1 Linux Kernel 2026-11-12 7.8 High
In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix warning when unbinding If there is an error during some initialization related to firmware, the buffers dp->tx_ring[i].tx_status are released. However this is released again when the device is unbinded (ath11k_pci), and we get: WARNING: CPU: 0 PID: 6231 at mm/slub.c:4368 free_large_kmalloc+0x57/0x90 Call Trace: free_large_kmalloc ath11k_dp_free ath11k_core_deinit ath11k_pci_remove ... The issue is always reproducible from a VM because the MSI addressing initialization is failing. In order to fix the issue, just set the buffers to NULL after releasing in order to avoid the double free.
CVE-2026-86502 1 Jetbrains 1 Intellij Idea 2026-11-12 8.4 High
In JetBrains IntelliJ IDEA before 2026.2.2 missing TLS and authentication on the IJent gRPC server allowed local code execution on Remote Development hosts
CVE-2026-86504 1 Jetbrains 1 Intellij Idea 2026-11-12 7.8 High
In JetBrains IntelliJ IDEA before 2026.2.2 missing project-trust confirmation before building a Dev Container allowed host-level code execution
CVE-2026-86378 1 Dell 2 Data Domain Operating System, Powerprotect Data Domain 2026-11-12 8.8 High
Dell PowerProtect Data Domain, Feature Release versions 7.7.1.0 through 8.8, LTS2024 release versions 7.13.1.0 through 7.13.1.80, LTS2025 release versions 8.3.1.0 through 8.3.1.40, LTS2026 release versions 8.6.1.0 through 8.6.1.20, contain a Stack-based Buffer Overflow vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to unauthorized access.
CVE-2026-84837 1 Redhat 5 Enterprise Linux, Hardened Images, Hummingbird and 2 more 2026-11-12 7.8 High
A flaw was found in rpm. An attacker can exploit a command injection vulnerability by influencing the path or filename of a tarball processed by `rpmbuild -t*` to include shell metacharacters. This is particularly relevant in automated build or continuous integration (CI) workflows that ingest externally supplied artifact names. Successful exploitation allows for arbitrary command execution with the privileges of the build user, which could lead to information disclosure or disruption of the build environment.
CVE-2026-78367 1 Redhat 4 Enterprise Linux, Hummingbird, Openshift Ai and 1 more 2026-11-12 7 High
A vulnerability was found in RPM's rpmbuild tarball processing. When processing a crafted source archive, the getTarSpec() function in tools/rpmbuild.cc passes an attacker-controlled tar archive member name to rpmExpand() as part of a %{basename:...} macro expression. A specially crafted .spec member name can therefore inject RPM macros, including Lua expressions, resulting in arbitrary code execution with the privileges of the user running rpmbuild. This can be exploited when a victim or automated build system processes an attacker-controlled source tarball using rpmbuild tarball mode (such as -ts, -ta, or -tb).
CVE-2026-124489 1 Open-emr 1 Openemr 2026-11-12 7.1 High
OpenEMR before 8.3.0 contains a broken access control vulnerability in portal/portal_payment.php that allows low-privilege authenticated users to bypass billing ACL checks by tampering patient identifiers. Attackers can modify the pid and form_pid parameters to view payment pages and record fraudulent payment receipts for arbitrary patients, corrupting billing records.
CVE-2026-124477 1 Open-emr 1 Openemr 2026-11-12 8.8 High
OpenEMR before 8.3.0 contains a missing authorization vulnerability that allows low-privileged authenticated users to delete arbitrary patient recall records via the delete_Recall action. Attackers can send POST requests to /interface/main/messages/save.php with a target pid and r_ID to remove recall data without ACL or ownership checks.
CVE-2026-124472 1 Open-emr 1 Openemr 2026-11-12 8.1 High
OpenEMR before 8.3.0 contains a missing authorization vulnerability in interface/billing/sl_eob_patient_note.php that allows any authenticated user to read and modify patient billing notes. Attackers with low-privilege accounts can enumerate the patient_id parameter and submit POST requests using the embedded CSRF token to view or tamper with confidential billing data.