| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/test: Fix __fortify_panic
Fix a runtime assertion in setup_xor_mapping(). Fortify complains that it
is potentially overflowing the xormaps array per __counted_by(nr_maps).
Quiet the false positive by initializing @nr_maps earlier.
memcpy: detected buffer overflow: 32 byte write of buffer size 0
WARNING: lib/string_helpers.c:1036 at __fortify_report+0x4d/0xa0, CPU#8: modprobe/2728
Call Trace:
__fortify_panic+0xd/0xf
setup_xor_mapping+0x6c/0xa0 [cxl_translate]
[ dj: Fixed up @nr_entries to @nr_maps in commit log. ] |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-qpic-snand: write the feature value before executing SET_FEATURE
qcom_spi_send_cmdaddr() programs NAND_FLASH_CMD/NAND_EXEC_CMD and submits
the descriptors, which makes the controller execute the command
immediately. For SPINAND_SET_FEATURE the value to be written is only
placed into NAND_FLASH_FEATURES afterwards, by qcom_spi_io_op(), in a
second submission - so the chip is programmed with whatever that register
happened to hold from a previous operation, and the intended value is only
applied by the *next* SET_FEATURE.
Measured on a TP-Link Archer AX55 v1 (IPQ5018, ESMT F50L1G41LB): writing
0x40 to the configuration register (0xb0) leaves the chip at 0x00, and the
subsequent write of 0x00 leaves it at 0x40 - every write lands one
operation late.
This stayed unnoticed until v6.18 added SPI-NAND OTP support together
with OTP entries for ESMT chips. spinand_otp_rw() enables OTP mode,
reads, and disables it again, and mtd_otp_nvmem_add() does this during
MTD registration. With the off-by-one, the "disable" write actually
applies the previously requested value, so CFG_OTP_ENABLE ends up set:
the chip stays in OTP mode, every subsequent array read returns the OTP
area instead of the array (UBI reports an empty device) and all writes
fail with -EIO because the OTP area is write protected. On this board
that makes the whole flash unusable and the device unbootable.
Write the feature value into NAND_FLASH_FEATURES as part of the same
transaction, before NAND_EXEC_CMD. While at it, copy only the bytes the
operation actually carries - the previous code dereferenced a 4-byte
pointer on a one-byte buffer (spinand->scratchbuf).
With this patch the flash contents read back bit-identical to a
known-good dump of the same board taken under the vendor firmware
(md5-verified across partitions), and writes work. |
| Improper neutralization of Script-Related HTML tags in a web page (basic XSS) vulnerability in Softtr Informatics Technology Trading Limited Company E-Commerce Pack allows Cross-Site Scripting (XSS).
This issue affects E-Commerce Pack: before 5.03.01.49. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/pseries: papr-phy-attest - validate cmd.length, plug mem leak
In papr_phy_attest_create_handle(), the params->cmd.length is not
validated before use, which can result in a buffer overlow. Check it and
return -EINVAL if it is either 0 or exceeds sizeof(params->cmd).
Also, params is freed on the success path but not error. Free it on
errors after memory allocation. And free it on negative fd. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - zero report size on F54 work error
In rmi_f54_work(), if an error occurs during report request or command
verification, the code jumped directly to the 'error' label, bypassing
the 'abort' label where f54->report_size was normally zeroed out.
This left f54->report_size containing its previous successful payload
size. If a user then altered the V4L2 format to a smaller size, and a
subsequent run failed, rmi_f54_buffer_queue() would copy the stale,
larger payload size into the shrunken V4L2 buffer, causing a heap
buffer overflow.
Fix this by merging the 'abort' and 'error' labels into a single 'out'
exit path, and ensuring that f54->report_size is always set to 0 on
failure by checking for error and zeroing the local report_size first. |
| Reliance on Untrusted Inputs in a Security Decision vulnerability in Apache APISIX.
This vulnerability allows an attacker to escalate privilege or perform an authorization bypass by sending certain values that the attach-consumer-label plugin does not sanitise correctly.
This issue affects Apache APISIX: from 3.11.0 through 3.17.0.
Users are recommended to upgrade to version 3.18.0, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: misc: usbio: check ibuf_len against rxbuf_len in bulk msg
ibuf_len is the bulk IN (receive) buffer size, but the EMSGSIZE check
in usbio_bulk_msg() compares it against txbuf_len — the bulk OUT
endpoint size. Both are taken independently from different endpoints
in usbio_probe(), so the check is wrong when they differ.
Use rxbuf_len for the IN direction. This matches the buffer that
actually holds the response data. |
| justhtml versions before 1.13.0 contain a cross-site scripting vulnerability in the to_markdown() function when serializing attacker-controlled pre content. Attackers can place backticks inside sanitized pre elements to break out of fixed-length code fences, allowing raw HTML to execute when the generated Markdown is rendered by CommonMark or GFM-style renderers. |
| Mitigation bypass in the Safe Browsing component. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| Mitigation bypass in the Storage: Cache API component. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1. |
| In the Linux kernel, the following vulnerability has been resolved:
fpga: dfl: add bounds check in dfh_get_param_size()
dfh_get_param_size() can return a parameter size larger than the feature
region because the loop bounds check is evaluated before incrementing
size. If the EOP (End of Parameters) bit is set in the same iteration,
the inflated size is returned without re-validation against max.
This can cause create_feature_instance() to call memcpy_fromio() with a
size exceeding the ioremap'd region when a malicious FPGA device provides
crafted DFHv1 parameter headers.
Add a bounds check after the size increment to ensure the accumulated
size never exceeds the feature boundary. |
| OctoPrint provides a web interface for controlling consumer 3D printers. Prior to 1.11.8 and 2.0.0rc3, Suppressed Command notification popups use PNotify rendering for printer-controlled payload.command and payload.message values in src/octoprint/static/js/app/viewmodels/terminal.js without HTML escaping. An attacker who convinces a victim to print a crafted file can inject HTML and JavaScript into the notification, disrupt prints, read information available to the victim including sensitive settings when permitted, or perform actions in the victim's OctoPrint session. This issue is fixed in versions 1.11.8 and 2.0.0rc3. |
| Snipe-IT before 8.6.0 contains an authorization bypass (insecure direct object reference) in the asset checkout-request cancellation endpoint. The cancel_by_admin and requestingUser values are read from user-controlled URL path segments and used without a server-side authorization check, so any authenticated, low-privileged user can supply a non-empty cancel_by_admin value to bypass the request-ownership check and cancel another user's pending checkout request. Because asset and user identifiers are sequential integers, an attacker can enumerate them to cancel every pending checkout request, disrupting the asset-request workflow. This is fixed in Snipe-IT 8.6.0. |
| AngleSharp is a .NET library for parsing angle bracket based hyper-texts. Prior to 1.5.0, MathAnnotationXmlElement in AngleSharp/Mathml/Dom/Internal/MathAnnotationXmlElement.cs is not treated as an HTML integration point when its encoding attribute is text/html or application/xhtml+xml, causing Consume in AngleSharp/Html/Parser/HtmlDomBuilder.cs to route tokens through foreign-content parsing instead of HTML parsing. A sanitizer can therefore observe a different DOM from the browser that reparses the serialized output. An attacker can combine this namespace differential with markup-breaking characters in an attribute value so that an element hidden from the sanitizer becomes active script-capable HTML after browser reparse, resulting in mutation cross-site scripting. This issue is fixed in version 1.5.0. |
| Maps is a MediaWiki extension that enables visualization of geographic data through dynamic embedded maps. Prior to version 12.1.3, the display_map parser function in the Leaflet service accepts attacker-controlled HTML in the overlays parameter, and resources/leaflet/jquery.leaflet.js uses the overlay name as a Leaflet layer-control label without escaping it. A wiki user with the edit permission can store malicious wikitext that causes script execution when another user previews or views the affected map. The script executes in the viewing user's browser session and can access data or perform actions available to that user. This issue is fixed in version 12.1.3. |
| Mitigation bypass in the Add-ons Manager component. This vulnerability was fixed in Firefox 154, Firefox ESR 153.1, Thunderbird 154, and Thunderbird 153.1. |
| BuildKit is a toolkit for converting source code to build artifacts in an efficient, expressive and repeatable manner. Prior to 0.31.1, a custom frontend could place an invalid SecurityMode value in a crafted build request, and executor/oci/spec_linux.go treated the unsupported value as a non-sandbox mode without requiring the security.insecure entitlement. This disabled Seccomp and AppArmor protections for the build container even though Linux capabilities remained restricted. This issue is fixed in version 0.31.1. |
| A vulnerability in the web-based management interface of Cisco Industrial Ethernet (IE) 1000 Series Switches could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface.
This vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected system. An attacker could exploit this vulnerability by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of another user. To exploit this vulnerability, the attacker must have valid user credentials on the affected system. |
| Mitigation bypass in the JavaScript: GC component. This vulnerability was fixed in Firefox 154, Firefox ESR 153.1, Thunderbird 154, and Thunderbird 153.1. |
| authentik is an open-source identity provider. Prior to 2026.2.6 and 2026.5.5, the enterprise Google Chrome device-trust stages advance the flow without confirming that the out-of-band device attestation actually ran. Affected enterprise deployments place either a Google Chrome Endpoint stage with mode set to REQUIRED or the deprecated Google Chrome Device Trust Connector stage in an authentication flow. The device attestation occurs in a verification iframe that calls the Google Verified Access API and records the verified device on success, but the vulnerable stages treat the flow as passed as soon as the stage is submitted. An attacker who can reach such a stage, including after primary username and password authentication, can skip the verification iframe and authenticate from a device that was never verified. Where device trust is the only additional factor, that protection is fully bypassed, while other configured factors remain in force. This issue is fixed in versions 2026.2.6 and 2026.5.5. |