Search Results (112300 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-12424 1 Wordpress-extensions 1 Arforms 2026-11-12 7.2 High
The ARforms plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Referer Header in all versions up to, and including, 7.2.4 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The arf_save_incomplete_form_data() AJAX handler is registered with wp_ajax_nopriv_, meaning unauthenticated attackers can store a malicious payload by submitting a partial form entry with a forged Referer header, with no authentication required at any step.
CVE-2026-63883 1 Linux 1 Linux Kernel 2026-11-12 7.3 High
In the Linux kernel, the following vulnerability has been resolved: serial: qcom_geni: fix kfifo underflow when flush precedes DMA completion IRQ When uart_flush_buffer() runs before the DMA completion IRQ is delivered, the following race can occur (all steps serialized by uart_port_lock): 1. DMA starts: tx_remaining = N, kfifo contains N bytes 2. DMA completes in hardware; IRQ is pending but not yet delivered 3. uart_flush_buffer() acquires the port lock and calls kfifo_reset(), making kfifo_len() = 0 while tx_remaining remains N 4. uart_flush_buffer() releases the port lock 5. DMA IRQ fires; handle_tx_dma() acquires the port lock and calls uart_xmit_advance(uport, tx_remaining) on an empty kfifo uart_xmit_advance() increments kfifo->out by tx_remaining. Since kfifo_reset() already set both in and out to 0, out wraps past in, causing kfifo_len() to return UART_XMIT_SIZE - tx_remaining. The next start_tx_dma() call then submits a DMA transfer of stale buffer data. Fix this by snapshotting kfifo_len() at the start of handle_tx_dma() and skipping uart_xmit_advance() when fifo_len < tx_remaining, which indicates the kfifo was reset by a preceding flush.
CVE-2026-12427 1 Wordpress-extensions 1 Arforms 2026-11-12 7.2 High
The ARforms plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'description' parameter in all versions up to, and including, 7.2.4 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The injected payload is deserialized via maybe_unserialize() when an administrator views the affected entry; if the attacker's array contains a 'referrer' key, the attacker-controlled page_url and http_referrer values are used as-is and rendered unescaped into the admin entry detail view.
CVE-2026-64567 1 Linux 1 Linux Kernel 2026-11-12 7.8 High
In the Linux kernel, the following vulnerability has been resolved: btrfs: reject free space cache with more entries than pages When loading a v1 free space cache, __load_free_space_cache() takes num_entries and num_bitmaps straight from the on-disk btrfs_free_space_header. That header is stored in the tree_root under a key with type 0, which the tree-checker has no case for, so neither count is validated before the load trusts it. The load loops num_entries times and maps the next page whenever the current one runs out, going through io_ctl_check_crc() -> io_ctl_map_page(), which does io_ctl->pages[io_ctl->index++]. But pages[] is allocated in io_ctl_init() from the cache inode's i_size, not from num_entries: num_pages = DIV_ROUND_UP(i_size_read(inode), PAGE_SIZE); io_ctl->pages = kcalloc(num_pages, sizeof(struct page *), GFP_NOFS); So if num_entries claims more records than the pages can hold, io_ctl->index runs off the end of pages[]. The write side never hits this because io_ctl_add_entry() and io_ctl_add_bitmap() both stop once io_ctl->index >= io_ctl->num_pages; the read side just never had the same check. To trigger it, take a clean cache (num_entries = <N> here), set num_entries in the header to 0x10000, and fix up the leaf checksum so it still passes the tree-checker. The cache inode has i_size = 65536, so num_pages is 16 and pages[] is a 16-pointer (kmalloc-128) array. The load now tries to read 65536 entries, io_ctl->index walks up to 16, and pages[16] is read past the array: BUG: KASAN: slab-out-of-bounds in io_ctl_check_crc (fs/btrfs/free-space-cache.c:420 fs/btrfs/free-space-cache.c:565) Read of size 8 at addr ffff88800c833a80 by task kworker/u8:3/58 io_ctl_check_crc (fs/btrfs/free-space-cache.c:420 fs/btrfs/free-space-cache.c:565) __load_free_space_cache (fs/btrfs/free-space-cache.c:655 fs/btrfs/free-space-cache.c:820) load_free_space_cache (fs/btrfs/free-space-cache.c:1017) caching_thread (fs/btrfs/block-group.c:880) btrfs_work_helper (fs/btrfs/async-thread.c:312) process_one_work worker_thread kthread ret_from_fork free-space-cache.c:420 is io_ctl_map_page(), inlined into io_ctl_check_crc() at line 565, which is why that is the frame KASAN names. The out-of-bounds slot is then treated as a struct page and handed to crc32c(), so the bad read turns into a GP fault. Add the missing check to io_ctl_check_crc(), which is where both the entry loop and the bitmap loop end up. When num_entries is too large the load now fails like any corrupt cache: __load_free_space_cache() drops it and rebuilds the free space from the extent tree, so a valid cache is never rejected.
CVE-2026-64570 1 Linux 1 Linux Kernel 2026-11-12 7.8 High
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix fils_discovery double free on alloc failure ieee80211_set_fils_discovery() calls kfree_rcu() on the old template before allocating the replacement. If the kzalloc() then fails, it returns -ENOMEM while link->u.ap.fils_discovery still points at the object already queued for freeing. A later update or AP teardown (ieee80211_stop_ap()) re-queues that same rcu_head; the second free is caught by KASAN when the RCU sheaf is processed in softirq: BUG: KASAN: double-free in rcu_free_sheaf (mm/slub.c:5850) Free of addr ffff88800c065280 by task swapper/0/0 ... __rcu_free_sheaf_prepare (mm/slub.c:2634 mm/slub.c:2940) rcu_free_sheaf (mm/slub.c:5850) rcu_core (kernel/rcu/tree.c:2617 kernel/rcu/tree.c:2869) handle_softirqs (kernel/softirq.c:622) The buggy address belongs to the cache kmalloc-96 of size 96 Queue the old object for kfree_rcu() only after the new one is published, matching ieee80211_set_probe_resp() and ieee80211_set_s1g_short_beacon().
CVE-2026-125348 1 Google 1 Chrome 2026-11-12 8.8 High
Out of bounds write in GPU in Google Chrome prior to 157.0.8103.50 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High)
CVE-2026-64460 1 Linux 1 Linux Kernel 2026-11-12 7 High
In the Linux kernel, the following vulnerability has been resolved: PCI/IOV: Skip VF Resizable BAR restore on read error sriov_restore_vf_rebar_state() uses the VF Resizable BAR Control register to decide how many VF BARs to restore (nbars) and which VF BAR each iteration addresses (bar_idx). bar_idx indexes into dev->sriov->barsz[], which has only PCI_SRIOV_NUM_BARS (6) entries. When a device does not respond, config reads typically return PCI_ERROR_RESPONSE (~0). Both fields are 3 bits wide, so nbars and bar_idx both evaluate to 7. The barsz[] access then goes out of bounds. UBSAN reports this as: UBSAN: array-index-out-of-bounds in drivers/pci/iov.c:948:51 index 7 is out of range for type 'resource_size_t [6]' Observed on an NVIDIA RTX PRO 1000 GPU (GB207GLM) that stopped responding during a failed GC6 power state exit. The subsequent pci_restore_state() invoked sriov_restore_vf_rebar_state() while config reads returned 0xffffffff, triggering the splat. Bail out if any VF Resizable BAR Control read returns PCI_ERROR_RESPONSE. No further VF BARs are touched, which is safe because a config read that returns PCI_ERROR_RESPONSE indicates the device is unreachable and restoration is pointless. This mirrors the guard in pci_restore_rebar_state().
CVE-2026-122165 1 Microsoft 23 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 20 more 2026-11-12 7.8 High
Heap-based buffer overflow in Windows Client for NFS allows an authorized attacker to elevate privileges locally.
CVE-2026-122166 1 Microsoft 23 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 20 more 2026-11-12 7.8 High
Stack-based buffer overflow in Windows Remote Desktop Services allows an authorized attacker to elevate privileges locally.
CVE-2026-122169 1 Microsoft 23 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 20 more 2026-11-12 7.5 High
Insufficient granularity of access control in Windows IKE Extension allows an authorized attacker to perform spoofing locally.
CVE-2026-122170 1 Microsoft 23 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 20 more 2026-11-12 7 High
Use after free in Windows Win32K allows an authorized attacker to elevate privileges locally.
CVE-2026-122177 1 Microsoft 23 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 20 more 2026-11-12 7.5 High
Improper link resolution before file access ('link following') in Windows iSCSI allows an unauthorized attacker to elevate privileges over a network.
CVE-2026-124035 1 Amazon 1 Amazon-braket-schemas 2026-11-12 7.1 High
Unsafe reflection in the error mitigation schema validation in Amazon Braket Schemas before 1.32.2 might allow a remote authenticated user with S3 write access to the quantum task output location to execute arbitrary code on any machine that retrieves the quantum task results via a crafted task result document. We recommend you upgrade to amazon-braket-schemas version 1.32.2 or later.
CVE-2026-121370 1 Arista 1 Eos 2026-11-12 8.6 High
On affected platforms running Arista EOS with Precision Time Protocol (PTP) configured, an unauthenticated attacker with network access to a PTP-enabled port can create a denial of service (DoS) condition by sending traffic to the system.
CVE-2026-121371 1 Arista 1 Eos 2026-11-12 7.5 High
On affected EOS versions with the eAPI service enabled, a specially crafted HTTP request can allow an unauthenticated, remote attacker to read arbitrary files, including sensitive credentials from the switch filesystem.
CVE-2026-125119 1 Automattic 1 Mongoose 2026-11-12 7.5 High
Mongoose is a MongoDB object modeling tool designed to work in an asynchronous environment. From 6.0.0 until 6.13.12, 7.8.13, 8.24.7, and 9.11.4, Mongoose stores the connection-level sanitizeFilter option in Connection.config, but Query.prototype._castConditions() and query casting check other option locations and do not read that configuration. An application that enables sanitizeFilter through mongoose.connect() or createConnection() and passes an attacker-controlled object into a query filter therefore receives a connection that reports the defense as enabled while query selector objects remain unsanitized. A crafted password value using a query operator can match an account record without the expected literal password, while global configuration through mongoose.set('sanitizeFilter') and per-query Model.find().sanitizeFilter() remain unaffected. This issue is fixed in versions 6.13.12, 7.8.13, 8.24.7, and 9.11.4.
CVE-2026-125111 1 Rack 1 Rack 2026-11-12 7.5 High
Rack is a modular Ruby web server interface. Prior to 2.2.25, 3.1.23, and 3.2.8, Rack::Multipart::Parser can retain parsed data in its internal StringScanner buffer when reads end inside or immediately after multipart headers. An unauthenticated attacker can align many small parts with rack.multipart.buffer_size boundaries so the buffer grows with the request despite per-field, header, and preamble limits, causing a worker to exhaust memory. The attack requires only a well-formed multipart body and affects applications that parse multipart requests. This issue is fixed in versions 2.2.25, 3.1.23, and 3.2.8.
CVE-2026-125074 1 Sourcecodester 1 Smart Attendance System With Qr Code Scanner 2026-11-12 7.3 High
A flaw has been found in SourceCodester Smart Attendance System with QR Code Scanner 1.0. This affects an unknown function of the file reset_password.php of the component Password Reset. This manipulation of the argument username/password causes weak password recovery. The attack is possible to be carried out remotely. The exploit has been published and may be used.
CVE-2026-124328 1 Flowci 1 Flow-core-x 2026-11-12 7.4 High
A vulnerability has been found in FlowCI flow-core-x up to 1.23.49. The affected element is the function ConditionManagerImpl.run of the file core/src/main/java/com/flowci/core/common/manager/ConditionManagerImpl.java of the component Groovy Script Evaluation. The manipulation of the argument condition leads to code injection. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
CVE-2026-123999 1 Nasajpl 1 Iondtn 2026-11-12 7.5 High
NASA JPL ION-DTN 3.6.2 through 4.2.0 contains a heap-based buffer overflow in the Network Management daemon (nm_mgr) string-formatting logic that allows a malicious or misconfigured agent to trigger an out-of-bounds write by sending deeply nested AMP payloads that exceed fixed-size buffer allocations through unbounded strcat operations. Attackers can transmit oversized AMP reports, tables, or macros over the UDP CLA/AMP path or trigger the flaw locally via interactive UI rendering to crash nm_mgr and cause a denial of service halting telemetry collection and operator visibility.