| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Forms using FileUpload or ImageUpload elements with a custom saveToFileMount configured stored uploaded files in the default storage folder 1:/user_upload/ instead of the configured destination. This could cause uploaded files to end up in a publicly accessible storage even though a restricted, non-public storage had been configured. Files stored this way are served directly, without the access checks applied to non-public storages. Forms that use the default value for saveToFileMount are not affected. This issue affects TYPO3 CMS versions 14.0.0-14.3.8. |
| Temporal Server does not bind internal completion callbacks to the namespace that attached them, which allows an authenticated caller with write permission in one namespace to alter Scheduler V2 schedule state in another namespace. The callback address temporal://internal is reserved for callbacks that Scheduler V2 attaches to the Workflows it starts. In affected releases, any authenticated caller could attach a callback with that address to a Workflow start request, the address was exempt from the component.callbacks.allowedAddresses allowlist, and the History service delivered the callback to the component its token named, in whatever namespace that was, without authorizing the original caller there. When the forged completion matches an action a target schedule is running, the schedule records the action as completed while its Workflow still runs, which can defeat an overlap policy such as SKIP, and passes caller-controlled data to the next scheduled Workflow as its last completion result. A forged failure may also pause a schedule configured to pause on failure. A forgery requires the target namespace identifier, the schedule identifier, and the identity and timing of a running action. No disclosure of Workflow payloads or history was identified. Only namespaces that hold Scheduler V2 schedules can be targeted; Scheduler V2 is off by default, and existing Scheduler V2 schedules remain targets after the settings that create them are turned off. |
| Easy!Appointments through 1.6.0 contains an authorization bypass vulnerability in Booking::register() that allows unauthenticated attackers to modify any appointment by supplying an appointment id without its hash. Attackers can enumerate sequential appointment ids with a self-asserted manage_mode flag to rewrite appointment details, rebind them to attacker-controlled customers, and obtain management hashes for rescheduling or cancellation. |
| UnicomAI Wanwu before 0.6.3 contains an insecure direct object reference vulnerability that allows authenticated low-privileged users to delete other tenants' agent or RAG applications by supplying their appId. Attackers can send requests to DELETE /v1/appspace/app with guessed sequential assistant IDs to permanently delete victims' applications, workflows, conversations, and associated data. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Fix RB-tree corruption in probe error path
The info->node RB-tree member is zero-initialized via kzalloc. If
a device does not support ATS, the device_rbtree_insert() call is
skipped. If a subsequent probe step fails, the error path jumps to
device_rbtree_remove(), which misinterprets the zeroed node as
a tree root and corrupts the device RB-tree.
Fix this by explicitly initializing the RB-node as empty using
RB_CLEAR_NODE() during initialization and guarding the removal with
RB_EMPTY_NODE(). |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: meson: aiu: Validate written enum values
The AIU HDMI and internal codec mux put callbacks use the written enum
value with snd_soc_enum_item_to_val() before checking whether the value is
valid for the enumeration.
Reject out-of-range values before converting the enum item, matching the
validation already done by the G12A HDMI and internal codec mux controls. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_u32: reject invalid shift counts
u32_match_it() executes rule-supplied shift operands on a 32-bit
value. A malformed u32 rule can provide a shift count of 32 or more,
triggering an undefined shift out-of-bounds during packet evaluation.
Validate XT_U32_LEFTSH and XT_U32_RIGHTSH operands in
u32_mt_checkentry() and reject malformed rules before they reach the
packet path. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: LAG, Fix off-by-one in single-FDB error rollback
On failure at index i, the reverse cleanup loop in
mlx5_lag_create_single_fdb() starts from i, so the failed index
itself is rolled back. That can operate on uninitialized state or
double-tear-down a rule the add_one path already self-rolled-back.
Start the rollback from i - 1 so only successfully-installed entries
are undone. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: fix 32-bit integer overflow in qrtr_endpoint_post()
qrtr_endpoint_post() validates an incoming packet with
if (!size || len != ALIGN(size, 4) + hdrlen)
goto err;
where size comes from the wire. On 32-bit, size_t is 32 bits and
ALIGN(size, 4) wraps to 0 for size >= 0xfffffffd, so the check
passes and skb_put_data(skb, data + hdrlen, size) writes past the
hdrlen-sized skb and oopses the kernel. 64-bit is unaffected.
This is the 32-bit residual of ad9d24c9429e2 ("net: qrtr: fix OOB
Read in qrtr_endpoint_post"), which fixed only the 64-bit case.
Reject any size that cannot fit the buffer before the ALIGN. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Ignore pending PV EOI if the vCPU has since disabled PV EOIs
Ignore KVM's internal "service pending PV EOI" request if the vCPU has
disabled PV EOIs since the request was made. Asserting that PV EOIs are
enabled can fail if reading guest memory in pv_eoi_get_user() fails, i.e.
if pv_eoi_test_and_clr_pending() bails early, *and* the vCPU also disables
PV EOIs.
kernel BUG at arch/x86/kvm/lapic.c:3338!
Oops: invalid opcode: 0000 [#1] SMP
CPU: 4 UID: 1000 PID: 890 Comm: pv_eoi_test Not tainted 7.0.0-d585aa5894d8-vm #337 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:kvm_lapic_sync_from_vapic+0x12b/0x140 [kvm]
Call Trace:
<TASK>
kvm_arch_vcpu_ioctl_run+0x1075/0x1c30 [kvm]
kvm_vcpu_ioctl+0x2d5/0x980 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0xb5/0xb40
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
Modules linked in: kvm_intel kvm irqbypass
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Drop bogus WARN for write to ZCR_EL2
It is entirely possible for a guest to write to the ZCR_EL2 sysreg alias
while in a nested context, as it is expected if FEAT_NV2 is advertised
to the L1 hypervisor.
Get rid of the bogus WARN which, since the hyp vectors were installed at
this point, has the effect of a hyp_panic... |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conncount: fix zone comparison in tuple dedup
The "already exists" dedup logic in __nf_conncount_add() decides
whether a connection has already been counted and can be skipped instead
of incrementing the connlimit count. It compares the conntrack zone of a
list entry with the zone of the connection being added using
nf_ct_zone_id() and nf_ct_zone_equal(), passing conn->zone.dir or
zone->dir as the direction argument.
Those helpers take enum ip_conntrack_dir values: IP_CT_DIR_ORIGINAL is 0
and IP_CT_DIR_REPLY is 1. However, zone->dir is a u8 bitmask:
NF_CT_ZONE_DIR_ORIG is 1, NF_CT_ZONE_DIR_REPL is 2 and
NF_CT_DEFAULT_ZONE_DIR is 3. Passing that bitmask as the enum direction
shifts the meaning of every non-zero value. An ORIG-only zone passes 1
and is tested as REPLY, while REPL-only and default zones pass 2 or 3 and
test bits beyond the valid direction range. In those cases
nf_ct_zone_id() can fall back to NF_CT_DEFAULT_ZONE_ID instead of using
the real zone id, so different zones can be treated as equal and dedup
collapses to tuple equality alone.
nf_conncount stores and compares the original-direction tuple for a
connection. If an skb already has an attached conntrack entry,
get_ct_or_tuple_from_skb() explicitly copies
ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple, regardless of the packet's
ctinfo. Therefore the zone comparison in the tuple dedup path must use
IP_CT_DIR_ORIGINAL as well; the zone direction bitmask describes where a
zone id applies, not which direction this conncount tuple represents.
Fix the two dedup comparisons by passing IP_CT_DIR_ORIGINAL directly.
Do not special-case NF_CT_DEFAULT_ZONE_DIR and do not compare raw zone
ids: using the existing helpers with IP_CT_DIR_ORIGINAL preserves the
direction-aware NF_CT_DEFAULT_ZONE_ID fallback. A default bidirectional
zone contains the ORIG bit, so it naturally returns the real zone id;
reply-only zones continue to fall back for original-direction tuple
comparisons. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: ISST: Restore SST-PP control to all domains
The SST-PP control offset is only restored to power domain 0 after
resume. During suspend, control values are read and stored for all
power domains.
Use pd_info->sst_base instead of power_domain_info->sst_base, which
only points to power domain 0 base address. |
| OpenRun is an open-source, self-hosted GitOps platform for deploying web apps and internal tools to Docker or Kubernetes. Prior to version 0.17.7, the restrictions on redirect URLs in openrun can be bypassed by attackers, leading to open redirect attacks. This issue has been patched in version 0.17.7. |
| In the Linux kernel, the following vulnerability has been resolved:
net: skbuff: propagate shared-frag marker through frag-transfer helpers
Two frag-transfer helpers (__pskb_copy_fclone() and skb_shift()) fail
to propagate the SKBFL_SHARED_FRAG bit in skb_shinfo()->flags when
moving frags from source to destination. __pskb_copy_fclone() defers
the rest of the shinfo metadata to skb_copy_header() after copying
frag descriptors, but that helper only carries over gso_{size,segs,
type} and never touches skb_shinfo()->flags; skb_shift() moves frag
descriptors directly and leaves flags untouched. As a result, the
destination skb keeps a reference to the same externally-owned or
page-cache-backed pages while reporting skb_has_shared_frag() as
false.
The mismatch is harmful in any in-place writer that uses
skb_has_shared_frag() to decide whether shared pages must be detoured
through skb_cow_data(). ESP input is one such writer (esp4.c,
esp6.c), and a single nft 'dup to <local>' rule -- or any other
nf_dup_ipv4() / xt_TEE caller -- is enough to land a pskb_copy()'d
skb in esp_input() with the marker stripped, letting an unprivileged
user write into the page cache of a root-owned read-only file via
authencesn-ESN stray writes.
Set SKBFL_SHARED_FRAG on the destination whenever frag descriptors
were actually moved from the source. skb_copy() and skb_copy_expand()
share skb_copy_header() too but linearize all paged data into freshly
allocated head storage and emerge with nr_frags == 0, so
skb_has_shared_frag() returns false on its own; they need no change.
The same omission exists in skb_gro_receive() and skb_gro_receive_list().
The former moves the incoming skb's frag descriptors into the
accumulator's last sub-skb via two paths (a direct frag-move loop and
the head_frag + memcpy path); the latter chains the incoming skb whole
onto p's frag_list. Downstream skb_segment() reads only
skb_shinfo(p)->flags, and skb_segment_list() reuses each sub-skb's
shinfo as the nskb -- both p and lp must carry the marker.
The same omission also exists in tcp_clone_payload(), which builds an
MTU probe skb by moving frag descriptors from skbs on sk_write_queue
into a freshly allocated nskb. The helper falls into the same family
and warrants the same fix for consistency; no TCP TX-side in-place
writer is currently known to reach a user page through this gap, but
a future consumer depending on the marker would regress silently.
The same omission exists in skb_segment(): the per-iteration flag
merge takes only head_skb's flag, and the inner switch that rebinds
frag_skb to list_skb on head_skb-frags exhaustion does not fold the
new frag_skb's flag into nskb. Fold frag_skb's flag at both sites
so segments drawing frags from frag_list members carry the marker. |
| QloApps through 1.7.0 contains an authorization bypass vulnerability in AdminProductsController::ajaxProcessBulkUpdateRooms that allows hotel-restricted back-office employees to modify rooms of other hotels. Attackers can submit foreign room IDs in the id_rooms parameter to change status, floor, comments, or inactive dates, disrupting availability and bookings. |
| A flaw was found in BusyBox's mount utility. A non-root user can bypass mount security restrictions set in /etc/fstab by specifying clearing-mask options on the command line. These options pass the non-root flag filter and are merged with fstab options as strings; when the combined options are re-parsed, clearing options can override nosuid, nodev, and noexec protections the administrator intended to enforce. |
| The JAXB factory methods historically relied solely on `FEATURE_SECURE_PROCESSING` to prevent XML External Entity (XXE) resolution. On JAXP implementations where that feature alone does not block external entity resolution, an attacker who can get untrusted XML unmarshalled through JAXB can read local files via out-of-band XXE. |
| IBM Maximo Application Suite - IoT Component 9.2.0, 9.1.0, and 9.0.0 could allow a remote attacker to cause a denial of service due to uncontrolled recursion. |
| A vulnerability has been identified in RUGGEDCOM CROSSBOW (All versions < V6.0). Affected devices do not properly perform authorization checks for device disconnection requests. This could allow an authenticated attacker with minimal privileges to disconnect active sessions of other users, including administrators, leading to a denial of service. |