| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
| The Coder VS Code extension opens Coder workspaces in VS Code with a single click. From 0.1.20 until 1.14.6, a malicious repository can provide .vscode/settings.json values for security-sensitive Coder settings because the extension permits workspace and folder scope to override those settings. Values such as coder.headerCommand and coder.tlsCertRefreshCommand are later executed as shell commands, while other affected settings can redirect the Coder CLI binary or download source, inject CLI or SSH flags, replace TLS material, disable TLS verification, or change identity and credential-storage behavior. A victim with the extension installed must open the malicious workspace or repository; when the extension activates, attacker-controlled commands can run with the victim user's privileges. The issue also affects untrusted workspaces because the extension declares untrusted-workspace support without preventing consumption of the workspace-controlled settings. This issue is fixed in version 1.14.6. |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
| Numeric truncation error in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code locally. |
| When Apache Shiro is used with the Jakarta EE integration module, the automatic form saving feature weakens the security of a form that is resubmitted after login.
Cookies set by the application during the resubmission could lose their security attributes, such as `Secure` and `SameSite`.
In addition, the resubmitted form data and cookies could be sent to an untrusted host.
This issue affects Apache Shiro from 2.0.0-alpha through 3.0.1, only when using `shiro-jakarta-ee` integration module with form saving enabled (the default).
Mitigation: Upgrade to version 3.0.2 or later, which no longer replays the form over the network, and avoids this class of issues entirely.
Alternatively, you can set the `org.apache.shiro.form-resubmit-host` (String) and `org.apache.shiro.form-resubmit-port` (Integer) system properties to restrict the host and port that Shiro will connect to when resubmitting a form. |
| An internal security review identified a development regression from ThinkSystem v4 XClarity Controller 3 (XCC3) versions (2.51) IHX432Y to (2.56) IHX436K which re-introduces the default OpenBMC root password upon performing an XCC Reset to Default operation. An attacker can gain access to enabled administrative interfaces of XCC using the default OpenBMC credential re-introduced after Reset to Default. Additionally, this provides access to the underlying XCC Operating System which is not normally accessible. Only these versions are affected and are no longer available for download. Process enhancements have also been made to prevent and identify potential future regression. |
| A kernel pool buffer overflow vulnerability in the
ct0531fl.sys file of the Creative WDM Audio Driver (64-bit), Sound Blaster Audigy 4
and Sound Blaster Audigy 5/Rx could allow a local
attacker with low privilege access to cause a denial of service. |
| MCUboot's Zephyr serial-recovery upload handler bs_upload() in boot/boot_serial/src/boot_serial.c decodes the host-supplied image field of an MCUmgr image-upload request into img_num (a full 32-bit value) and latches it on the off == 0 packet without any range check. It then passes img_num straight to flash_area_id_from_multi_image_slot(img_num, 0), which on the Zephyr port resolves to __flash_area_ids_for_slot() in boot/zephyr/include/sysflash/sysflash.h and indexes the static const int all_slots[] table as all_slots[img_num 2]. That table holds only MCUBOOT_IMAGE_NUMBER 2 entries, so any img_num >= MCUBOOT_IMAGE_NUMBER is an out-of-bounds read.
The path is reachable by anyone with access to the serial / SMP recovery console, which is unauthenticated by design, and the bad value is supplied before any image signature is verified. The defect is specific to the default non-direct upload path (MCUBOOT_SERIAL_DIRECT_IMAGE_UPLOAD disabled) on the Zephyr port with the array-backed slot layout (not CONFIG_SINGLE_APPLICATION_SLOT). It is not gated on a multi-image configuration: MCUBOOT_IMAGE_NUMBER defaults to 1, so even a default single-image build is affected for any image >= 1. The MCUBOOT_SERIAL_DIRECT_IMAGE_UPLOAD path is safe (its flash_area_id_from_direct_image() switch returns -EINVAL for unknown indices).
flash_area_id_from_multi_image_slot() takes a signed int image_index while img_num is uint32_t, so the attacker controls the sign of the index as well as its magnitude: an image of 0xFFFFFFFE converts to -2 and reads all_slots[-4], off the front of the table, while large positive values read off the end (CWE-192). (0xFFFFFFFF itself is the "no image given" sentinel and selects image 0.) Either way the index multiply img * 2 is performed in int, so a wild offset yields a bus/hard fault, giving a reliable denial of service of the bootloader during recovery. For moderately out-of-range indices the read returns adjacent .rodata as a garbage flash-area id that is handed to flash_area_open(); this normally fails with MGMT_ERR_EINVAL, but if the garbage id happens to match a valid non-image partition, the subsequent erase/write can target a partition outside the image set (CWE-787). The attacker-supplied value is never echoed back, so there is no information disclosure. The fix is to reject img_num >= BOOT_IMAGE_NUMBER on the off == 0 packet, before the slot lookup. The comparison must be made on the unsigned img_num: an equivalent guard applied after the conversion to int would not reject the negative case above. __flash_area_ids_for_slot() should bounds-check its own arguments as defence in depth.
This vulnerability was reported independently twice: by NVIDIA Project Vanessa on 2026-06-22, and by Kai Phan (@kaimandalic) on 2026-07-19 as GHSA-8v33-88p6-jffj, which is closed as a duplicate of this advisory. Both original reports are reproduced in full below. |
| Quest NetVault Backup nvpmgr Integer Underflow Denial-of-Service Vulnerability. This vulnerability allows remote attackers to create a denial-of-service condition on affected installations of Quest NetVault Backup. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the nvpmgr service, which listens on UDP port 20031 by default. The issue results from the lack of proper validation of user-supplied data, which can result in an integer underflow before allocating a buffer. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. Was ZDI-CAN-28744. |
| Quest NetVault Backup StnzCreateKey Numeric Truncation Error Denial-of-Service Vulnerability. This vulnerability allows remote attackers to create a denial-of-service condition on affected installations of Quest NetVault Backup. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the StnzCreateKey function. The issue results from the lack of proper validation of user-supplied data, which can result in a numeric truncation error before allocating a buffer. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. Was ZDI-CAN-28743. |
| Buffer Copy without Checking Size of Input ('Classic Buffer Overflow') vulnerability in Samsung Open Source mTower allows Overflow Buffers. |
| @fastify/busboy is a streaming parser for multipart form data used by Fastify. In versions 3.2.1 through 3.2.5, the parser can interpret the same multipart bytes differently depending on how they are split across socket reads: when the sequence that terminates a part's header block arrives split exactly at the configured header size limit, an off by one error drops the final header line, so a part declared as a binary file attachment is emitted as an ordinary text field instead of a file. A remote client controls both the multipart body and the header padding needed to reach the boundary and can influence segmentation, so an application that applies upload validation such as malware scanning or extension checks only to file events while trusting plain field values may process the payload through the wrong path. The parser level type confusion is fully reproducible, while the downstream validation bypass depends on the application. The issue is fixed in @fastify/busboy 3.2.6, which tracks how many terminator bytes were actually buffered when the limit is reached so a split terminator no longer corrupts the final header, and users should upgrade to 3.2.6 or later. As a workaround, apply the same validation to field values as to file uploads rather than treating file events as a trust boundary. |
| An integer underflow in Zephyr's IPv4 option handling allows a remote, unauthenticated attacker to read stack memory. When replying to an ICMP Echo Request that carries an IPv4 Record Route or Timestamp option, icmpv4_update_record_route() and icmpv4_update_time_stamp() in subsys/net/ip/icmpv4.c compute the length of the already recorded data as ptr - ptr_offset in uint8_t arithmetic. The attacker-controlled Pointer field is checked against the option length but not against the RFC 791 minimum (4 for Record Route, 5 for Timestamp), so a smaller value wraps the length to up to 252 bytes. net_pkt_write() then reads past the 40-byte opt_data stack buffer and up to 213 bytes of stack memory, which can include stack and heap pointers, are returned in the ICMP Echo Reply. A single packet triggers the leak and the device does not crash, so it can be repeated. Devices built with CONFIG_NET_IPV4_HDR_OPTIONS, which CONFIG_NET_IPV4_IGMP selects, are affected. |
| A improper neutralization of special elements used in a template engine vulnerability in Fortinet FortiManager 8.0.0 through 8.0.1, FortiManager 7.6.0 through 7.6.7, FortiManager 7.4.0 through 7.4.11, FortiManager 7.2 all versions, FortiManager Cloud 8.0.0 through 8.0.1, FortiManager Cloud 7.6.0 through 7.6.7, FortiManager Cloud 7.4.1 through 7.4.11, FortiManager Cloud 7.2 all versions may allow a low privileged Device Manager admin to obtain super admin privilege on managed FortiGates via injecting malicious commands. |
| A integer overflow or wraparound vulnerability in Fortinet FortiMail 8.0.0 through 8.0.1, FortiMail 7.6.0 through 7.6.6, FortiMail 7.4.0 through 7.4.8, FortiMail 7.2 all versions may allow a remote unauthenticated attacker to crash the daemon. |
| libilbm ILBM File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of libilbm. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of ILBM files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-27792. |