| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Unauthenticated Denial of Service Attack in Starter Templates by Kadence WP <= 2.3.3 versions. |
| aiosmtplib is an asynchronous SMTP client for use with asyncio. Prior to 5.1.1, SMTP.mail(), SMTP.rcpt(), SMTP.vrfy(), and SMTP.expn() send caller-supplied addresses without rejecting embedded CR or LF bytes. Data after the line break is framed as additional standalone SMTP command lines, allowing an attacker who influences an envelope sender or recipient to inject commands such as MAIL FROM, RCPT TO, RSET, DATA, or AUTH. SMTP.sendmail() and SMTP.send() without a Message object pass addresses through the affected methods, while SMTP.send_message() is not affected. Successful injection can desynchronize the command-response pipeline, hang the SMTP instance, or send an arbitrary message without requiring attacker control of the SMTP server. This issue is fixed in version 5.1.1. |
| A vulnerability was identified in chenhg5 cc-connect up to 1.4.1. This affects the function shellExecCommand of the file core/engine.go of the component Management API. Such manipulation of the argument exec leads to os command injection. It is possible to launch the attack remotely. The exploit is publicly available and might be used. The reported GitHub issue was closed automatically due to inactivity. |
| A vulnerability has been found in Tenda CH22 1.0.0.1. The affected element is the function formcreateFileName of the file /goform/formcreateFileName. The manipulation of the argument fileNameMit leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. |
| A vulnerability was identified in TRENDnet TV-IP751WIC 11.03.03. Affected by this vulnerability is an unknown functionality of the file /cgi-bin/admin/set_time.cgi of the component alphapd. The manipulation leads to command injection. The attack can be initiated remotely. The exploit is publicly available and might be used. |
| Renovate versions from 39.53.0 before 40.33.0 contain a command injection vulnerability in the gleam manager where the depName parameter is appended to gleam deps update commands without proper sanitization. Attackers with repository write access can craft malicious gleam.toml files to execute arbitrary commands on the machine running Renovate. |
| A vulnerability in the handling of management plane packets by Cisco Industrial Ethernet (IE) 1000 Series Switches could allow an unauthenticated, remote attacker to cause the device manager, SSH, or API to become inaccessible.This vulnerability is due to insufficient protection against management plane flooding attacks. An attacker could exploit this vulnerability by sending a high rate of ICMP, SSH, or HTTP traffic to an affected device. A successful exploit could allow the attacker to cause the CPU of the device to increase, resulting in a denial of service (DoS) condition on the device manager web GUI, SSH, or API. Data traffic through the device is not affected. |
| A vulnerability was detected in TRENDnet TEW-823DRU 1.1.02b01. Impacted is an unknown function of the file /cgi-bin/admin.cgi. The manipulation of the argument Hostname results in command injection. The attack can be launched remotely. The exploit is now public and may be used. |
| A flaw has been found in TRENDnet Router 1.1.02b01. The affected element is an unknown function of the file /cgi-bin/ping.cgi. This manipulation of the argument wan_type causes command injection. The attack may be initiated remotely. The exploit has been published and may be used. |
| A security vulnerability has been detected in COMFAST CF-N1-S 2.6.0.1. Impacted is the function sub_44A968 of the file /cgi-bin/mbox-config?method=SET§ion=ptest_macaddress. Such manipulation of the argument macaddress leads to command injection. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A weakness has been identified in GL.iNet A1300, AX1800, AXT1800, BE1400, BE3600, BE6500, BE9300, BE10000, E5800, MT2500, MT3000, MT3600BE, MT5000, MT6000, X2000, X3000 and XE3000 up to 4.8.x. This affects an unknown part of the component Wi-Fi Timer Power-Schedule Feature. Executing a manipulation of the argument switch_power/restore_power can lead to os command injection. The attack can be launched remotely. The vendor explains: "After our investigation, we have confirmed that the vulnerability described (...) does indeed exist." |
| A flaw has been found in jiantao88 android-mcp-server up to cfb872b2446794193b58edd63f4dbf6af48a6292. The impacted element is the function child_process.exec of the file build/index.js of the component Command Execution. Executing a manipulation of the argument deviceId/packageName/permission/extras[].key/extras[].value can lead to os command injection. It is possible to launch the attack on the local host. The exploit has been published and may be used. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. This patch is called 14e2bf27c88ba137e35cbb0c2a75f72b595bb98a. It is advisable to implement a patch to correct this issue. |
| In wlan STA FW, there is a possible system becoming unresponsive due to logging. This could lead to remote (proximal/adjacent) denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00486814; Issue ID: MSV-6824. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: free RNR data on MBSSID mismatch
nl80211_parse_beacon() rejects EMA RNR data when there are fewer RNR
entries than MBSSID entries.
The rejected RNR allocation has not been attached to the beacon data yet,
so free it before returning the error. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service due to improper processing of DRDA and DDM resynchronization requests. |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: put MAC endpoint device on disconnect
fsl_mc_get_endpoint() returns the MAC endpoint device with a reference
taken through device_find_child(). The switch port connect path stores
that device in mac->mc_dev and keeps it for the lifetime of the connected
MAC object.
However, the disconnect path only closes the MAC and frees the dpaa2_mac
object. It does not drop the endpoint device reference stored in
mac->mc_dev, so every successful connect leaks that device reference when
the MAC is later disconnected.
Drop the endpoint device reference before freeing the dpaa2_mac object. |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-eth: put MAC endpoint device on disconnect
fsl_mc_get_endpoint() returns the MAC endpoint device with a reference
taken through device_find_child(). The Ethernet connect path stores that
device in mac->mc_dev and keeps it for the lifetime of the connected MAC
object.
However, the disconnect path only disconnects and closes the MAC before
freeing the dpaa2_mac object. It does not drop the endpoint device
reference stored in mac->mc_dev, so every successful connect leaks that
device reference when the MAC is later disconnected.
Drop the endpoint device reference after closing the MAC and before
freeing the dpaa2_mac object. |
| In the Linux kernel, the following vulnerability has been resolved:
media: airspy: Return queued buffers on start_streaming() failure
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
airspy_start_streaming() returned -ENODEV early when the USB device had
been disconnected (s->udev == NULL) without returning any buffers that
buf_queue() had already accepted. Take v4l2_lock first and jump to the
existing err_clear_bit label, which already drains s->queued_bufs via
vb2_buffer_done(..., VB2_BUF_STATE_QUEUED) before unlocking.
This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo:
Return queued buffers on start_streaming() failure"). |
| In the Linux kernel, the following vulnerability has been resolved:
media: meson: vdec: Fix memory leak in error path of vdec_open
The vdec_open() function previously jumped directly to
err_m2m_release when vdec_init_ctrls() failed, skipping
release of the m2m context. This caused a resource leak.
Fix it by introducing a proper err_m2m_ctx_release label
that calls v4l2_m2m_ctx_release(sess->m2m_ctx) before
releasing the m2m device.
This was identified via kmemleak:
unreferenced object 0xffff0000205d6878 (size 8):
comm "v4l_id", pid 5289, jiffies 4294938580
hex dump (first 8 bytes):
40 d2 49 18 00 00 ff ff @.I.....
backtrace (crc d3204599):
kmemleak_alloc+0xc8/0xf0
__kvmalloc_node_noprof+0x60c/0x850
v4l2_ctrl_handler_init_class+0x1b4/0x2e8 [videodev]
vdec_open+0x1f4/0x788 [meson_vdec]
v4l2_open+0x144/0x460 [videodev]
chrdev_open+0x1ac/0x500
do_dentry_open+0x3f0/0xfe8
vfs_open+0x68/0x320
do_open+0x2d8/0x9a8
path_openat+0x1d0/0x4f0
do_filp_open+0x190/0x380
do_sys_openat2+0xf8/0x1b0
__arm64_sys_openat+0x13c/0x1e8
invoke_syscall+0xdc/0x268
el0_svc_common.constprop.0+0x178/0x258
do_el0_svc+0x4c/0x70 |
| In the Linux kernel, the following vulnerability has been resolved:
media: msi2500: Return queued buffers on start_streaming() failure
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
msi2500_start_streaming() had five error paths that all hit this trap
and were further tangled by ret-overwriting between calls:
- -ENODEV when the USB device was already disconnected
- -ERESTARTSYS when mutex_lock_interruptible() was interrupted
- msi2500_set_usb_adc() failure: ret was silently overwritten by
the next call (msi2500_isoc_init), so the error was lost entirely
- msi2500_isoc_init() failure: cleanup_queued_bufs was called, but
the function then fell through to msi2500_ctrl_msg() and again
masked the original error by overwriting ret
- msi2500_ctrl_msg(CMD_START_STREAMING) failure: no cleanup at all,
leaving isoc URBs submitted with no way for the driver to consume
them
Consolidate the error paths into a small goto chain. Every failure
now stops the function, drains the queued-buffer list, and returns
the real error code. The ctrl_msg failure path also rolls back the
preceding msi2500_isoc_init() via msi2500_isoc_cleanup() before
unlocking and draining.
The cleanup helper takes a vb2_buffer_state argument so that the
start_streaming error paths can pass VB2_BUF_STATE_QUEUED (as
expected by userspace on start_streaming failure) while stop_streaming
keeps its existing VB2_BUF_STATE_ERROR semantics.
This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo:
Return queued buffers on start_streaming() failure"). |