| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM TXSeries for Multiplatforms 10.1 is vulnerable to a denial of service, caused by improper enforcement of the timeout on individual read operations. By conducting a slowloris-type attacks, a remote attacker could exploit this vulnerability to cause a denial of service. |
| IBM Security ReaQta 3.12 could allow an authenticated user to perform unauthorized actions due to reliance on untrusted inputs. |
| IBM Security ReaQta 3.12 could allow a privileged user to cause a denial of service by sending multiple administration requests due to improper allocation of resources. |
| IBM Security ReaQta 3.12 returns sensitive information in an HTTP response that could be used in further attacks against the system. |
| Allocation of Resources Without Limits or Throttling vulnerability in OpenText NetIQ Privileged Account Manager on Linux, Windows, 64 bit allows Flooding.This issue affects NetIQ Privileged Account Manager: before 3.7.0.2.
|
| Path Traversal in the Manager component of Wowza Streaming Engine below 4.9.1 allows an administrator user to delete any directory on the file system if the target directory contains an XML definition file. |
| Path Traversal in the Manager component of Wowza Streaming Engine below 4.9.1 allows an administrator user to create an XML definition file anywhere on the file system. |
| Path Traversal in the Manager component of Wowza Streaming Engine below 4.9.1 allows an administrator user to read any file on the file system if the target directory contains an XML definition file. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add NULL check for clk_mgr and clk_mgr->funcs in dcn401_init_hw
This commit addresses a potential null pointer dereference issue in the
`dcn401_init_hw` function. The issue could occur when `dc->clk_mgr` or
`dc->clk_mgr->funcs` is null.
The fix adds a check to ensure `dc->clk_mgr` and `dc->clk_mgr->funcs` is
not null before accessing its functions. This prevents a potential null
pointer dereference.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn401/dcn401_hwseq.c:416 dcn401_init_hw() error: we previously assumed 'dc->clk_mgr' could be null (see line 225) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add NULL check for function pointer in dcn401_set_output_transfer_func
This commit adds a null check for the set_output_gamma function pointer
in the dcn401_set_output_transfer_func function. Previously,
set_output_gamma was being checked for null, but then it was being
dereferenced without any null check. This could lead to a null pointer
dereference if set_output_gamma is null.
To fix this, we now ensure that set_output_gamma is not null before
dereferencing it. We do this by adding a null check for set_output_gamma
before the call to set_output_gamma. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add null check for 'afb' in amdgpu_dm_update_cursor (v2)
This commit adds a null check for the 'afb' variable in the
amdgpu_dm_update_cursor function. Previously, 'afb' was assumed to be
null at line 8388, but was used later in the code without a null check.
This could potentially lead to a null pointer dereference.
Changes since v1:
- Moved the null check for 'afb' to the line where 'afb' is used. (Alex)
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:8433 amdgpu_dm_update_cursor()
error: we previously assumed 'afb' could be null (see line 8388) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check stream_status before it is used
[WHAT & HOW]
dc_state_get_stream_status can return null, and therefore null must be
checked before stream_status is used.
This fixes 1 NULL_RETURNS issue reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Disable DMCUB timeout for DCN35
[Why]
DMCUB can intermittently take longer than expected to process commands.
Old ASIC policy was to continue while logging a diagnostic error - which
works fine for ASIC without IPS, but with IPS this could lead to a race
condition where we attempt to access DCN state while it's inaccessible,
leading to a system hang when the NIU port is not disabled or register
accesses that timeout and the display configuration in an undefined
state.
[How]
We need to investigate why these accesses take longer than expected, but
for now we should disable the timeout on DCN35 to avoid this race
condition. Since the waits happen only at lower interrupt levels the
risk of taking too long at higher IRQ and causing a system watchdog
timeout are minimal. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Run DC_LOG_DC after checking link->link_enc
[WHAT]
The DC_LOG_DC should be run after link->link_enc is checked, not before.
This fixes 1 REVERSE_INULL issue reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add otg_master NULL check within resource_log_pipe_topology_update
[Why]
Coverity reports NULL_RETURN warning.
[How]
Add otg_master NULL check. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix NULL pointer dereference for DTN log in DCN401
When users run the command:
cat /sys/kernel/debug/dri/0/amdgpu_dm_dtn_log
The following NULL pointer dereference happens:
[ +0.000003] BUG: kernel NULL pointer dereference, address: NULL
[ +0.000005] #PF: supervisor instruction fetch in kernel mode
[ +0.000002] #PF: error_code(0x0010) - not-present page
[ +0.000002] PGD 0 P4D 0
[ +0.000004] Oops: 0010 [#1] PREEMPT SMP NOPTI
[ +0.000003] RIP: 0010:0x0
[ +0.000008] Code: Unable to access opcode bytes at 0xffffffffffffffd6.
[...]
[ +0.000002] PKRU: 55555554
[ +0.000002] Call Trace:
[ +0.000002] <TASK>
[ +0.000003] ? show_regs+0x65/0x70
[ +0.000006] ? __die+0x24/0x70
[ +0.000004] ? page_fault_oops+0x160/0x470
[ +0.000006] ? do_user_addr_fault+0x2b5/0x690
[ +0.000003] ? prb_read_valid+0x1c/0x30
[ +0.000005] ? exc_page_fault+0x8c/0x1a0
[ +0.000005] ? asm_exc_page_fault+0x27/0x30
[ +0.000012] dcn10_log_color_state+0xf9/0x510 [amdgpu]
[ +0.000306] ? srso_alias_return_thunk+0x5/0xfbef5
[ +0.000003] ? vsnprintf+0x2fb/0x600
[ +0.000009] dcn10_log_hw_state+0xfd0/0xfe0 [amdgpu]
[ +0.000218] ? __mod_memcg_lruvec_state+0xe8/0x170
[ +0.000008] ? srso_alias_return_thunk+0x5/0xfbef5
[ +0.000002] ? debug_smp_processor_id+0x17/0x20
[ +0.000003] ? srso_alias_return_thunk+0x5/0xfbef5
[ +0.000002] ? srso_alias_return_thunk+0x5/0xfbef5
[ +0.000002] ? set_ptes.isra.0+0x2b/0x90
[ +0.000004] ? srso_alias_return_thunk+0x5/0xfbef5
[ +0.000002] ? _raw_spin_unlock+0x19/0x40
[ +0.000004] ? srso_alias_return_thunk+0x5/0xfbef5
[ +0.000002] ? do_anonymous_page+0x337/0x700
[ +0.000004] dtn_log_read+0x82/0x120 [amdgpu]
[ +0.000207] full_proxy_read+0x66/0x90
[ +0.000007] vfs_read+0xb0/0x340
[ +0.000005] ? __count_memcg_events+0x79/0xe0
[ +0.000002] ? srso_alias_return_thunk+0x5/0xfbef5
[ +0.000003] ? count_memcg_events.constprop.0+0x1e/0x40
[ +0.000003] ? handle_mm_fault+0xb2/0x370
[ +0.000003] ksys_read+0x6b/0xf0
[ +0.000004] __x64_sys_read+0x19/0x20
[ +0.000003] do_syscall_64+0x60/0x130
[ +0.000004] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ +0.000003] RIP: 0033:0x7fdf32f147e2
[...]
This error happens when the color log tries to read the gamut remap
information from DCN401 which is not initialized in the dcn401_dpp_funcs
which leads to a null pointer dereference. This commit addresses this
issue by adding a proper guard to access the gamut_remap callback in
case the specific ASIC did not implement this function. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: don't set RO when shutting down f2fs
Shutdown does not check the error of thaw_super due to readonly, which
causes a deadlock like below.
f2fs_ioc_shutdown(F2FS_GOING_DOWN_FULLSYNC) issue_discard_thread
- bdev_freeze
- freeze_super
- f2fs_stop_checkpoint()
- f2fs_handle_critical_error - sb_start_write
- set RO - waiting
- bdev_thaw
- thaw_super_locked
- return -EINVAL, if sb_rdonly()
- f2fs_stop_discard_thread
-> wait for kthread_stop(discard_thread); |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix division by zero in setup_dsc_config
When slice_height is 0, the division by slice_height in the calculation
of the number of slices will cause a division by zero driver crash. This
leaves the kernel in a state that requires a reboot. This patch adds a
check to avoid the division by zero.
The stack trace below is for the 6.8.4 Kernel. I reproduced the issue on
a Z16 Gen 2 Lenovo Thinkpad with a Apple Studio Display monitor
connected via Thunderbolt. The amdgpu driver crashed with this exception
when I rebooted the system with the monitor connected.
kernel: ? die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434 arch/x86/kernel/dumpstack.c:447)
kernel: ? do_trap (arch/x86/kernel/traps.c:113 arch/x86/kernel/traps.c:154)
kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu
kernel: ? do_error_trap (./arch/x86/include/asm/traps.h:58 arch/x86/kernel/traps.c:175)
kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu
kernel: ? exc_divide_error (arch/x86/kernel/traps.c:194 (discriminator 2))
kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu
kernel: ? asm_exc_divide_error (./arch/x86/include/asm/idtentry.h:548)
kernel: ? setup_dsc_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1053) amdgpu
kernel: dc_dsc_compute_config (drivers/gpu/drm/amd/amdgpu/../display/dc/dsc/dc_dsc.c:1109) amdgpu
After applying this patch, the driver no longer crashes when the monitor
is connected and the system is rebooted. I believe this is the same
issue reported for 3113. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix dcn35 8k30 Underflow/Corruption Issue
[why]
odm calculation is missing for pipe split policy determination
and cause Underflow/Corruption issue.
[how]
Add the odm calculation. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix MST Null Ptr for RV
The change try to fix below error specific to RV platform:
BUG: kernel NULL pointer dereference, address: 0000000000000008
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 4 PID: 917 Comm: sway Not tainted 6.3.9-arch1-1 #1 124dc55df4f5272ccb409f39ef4872fc2b3376a2
Hardware name: LENOVO 20NKS01Y00/20NKS01Y00, BIOS R12ET61W(1.31 ) 07/28/2022
RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper]
Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8>
RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224
RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280
RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850
R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000
R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224
FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 000000010ddc6000 CR4: 00000000003506e0
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x171/0x4e0
? plist_add+0xbe/0x100
? exc_page_fault+0x7c/0x180
? asm_exc_page_fault+0x26/0x30
? drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026]
? drm_dp_atomic_find_time_slots+0x28/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026]
compute_mst_dsc_configs_for_link+0x2ff/0xa40 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054]
? fill_plane_buffer_attributes+0x419/0x510 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054]
compute_mst_dsc_configs_for_state+0x1e1/0x250 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054]
amdgpu_dm_atomic_check+0xecd/0x1190 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054]
drm_atomic_check_only+0x5c5/0xa40
drm_mode_atomic_ioctl+0x76e/0xbc0
? _copy_to_user+0x25/0x30
? drm_ioctl+0x296/0x4b0
? __pfx_drm_mode_atomic_ioctl+0x10/0x10
drm_ioctl_kernel+0xcd/0x170
drm_ioctl+0x26d/0x4b0
? __pfx_drm_mode_atomic_ioctl+0x10/0x10
amdgpu_drm_ioctl+0x4e/0x90 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054]
__x64_sys_ioctl+0x94/0xd0
do_syscall_64+0x60/0x90
? do_syscall_64+0x6c/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f4dad17f76f
Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c>
RSP: 002b:00007ffd9ae859f0 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 000055e255a55900 RCX: 00007f4dad17f76f
RDX: 00007ffd9ae85a90 RSI: 00000000c03864bc RDI: 000000000000000b
RBP: 00007ffd9ae85a90 R08: 0000000000000003 R09: 0000000000000003
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000c03864bc
R13: 000000000000000b R14: 000055e255a7fc60 R15: 000055e255a01eb0
</TASK>
Modules linked in: rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device ccm cmac algif_hash algif_skcipher af_alg joydev mousedev bnep >
typec libphy k10temp ipmi_msghandler roles i2c_scmi acpi_cpufreq mac_hid nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_mas>
CR2: 0000000000000008
---[ end trace 0000000000000000 ]---
RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper]
Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8>
RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224
RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280
RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850
R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000
R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224
FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000
---truncated--- |