| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zstd: fix lost wakeup when waiting for a workspace
A writer can sleep forever in zstd_get_workspace() even though a workspace
is free. When zstd_alloc_workspace() fails, the task is queued on
zwsm->wait and schedules unconditionally, never re-testing the pool.
zstd_put_workspace() publishes the workspace and then calls cond_wake_up(),
which only wakes when a sleeper is already visible, so a workspace returned
between the failed allocation and prepare_to_wait() wakes nobody. The
window is wide: zstd_alloc_workspace() goes through kvmalloc() and may
enter reclaim.
Only a max level workspace triggers the wakeup and one is deliberately kept
allocated as the fallback every waiter waits for, so once its wakeup is
lost the writer stays in TASK_UNINTERRUPTIBLE until some other task happens
to return one. Re-check the pool after prepare_to_wait() has published the
waiter, and use the workspace if one turned up. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: finish active block group cleanup if call_zone_finish() fails
do_zone_finish() clears BLOCK_GROUP_FLAG_ZONE_IS_ACTIVE before finishing
the zones. If call_zone_finish() then fails it returned early, leaving the
now inactive block group on fs_info->zone_active_bgs, leaking its
reference, the BTRFS_FS_NEED_ZONE_FINISH waiters are never woken, and as
its alloc_offset equals the zone capacity btrfs_zone_finish_one_bg() keeps
selecting it, spinning btrfs_zoned_activate_one_bg().
Fall through to the cleanup on failure too and return the error, but keep
the block group read-only as its zones are left inconsistent. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: backtracking shouldn't clear outer frame R1-R5 for callbacks
When processing calls to bpf_loop() verifier marks R1 (and R4) as
precise. R1 tracks loop iterations number and because of the
'callback_depth < R1' mechanics in check_helper_call() must be marked
precise. However, precision propagation for R1 was broken,
when bpf_loop() call was verified on a second iteration.
Consider the following verification trace:
- main: bpf_loop(nr_loops, callback ...)
- callback: BPF_EXIT
- main: bpf_loop(nr_loops, callback ...)
- ...
While the first visit of the call to bpf_loop() propagated R1
precision as expected, the second call to mark_chain_precision() in
the check_helper_call() set R1, but it was immediately reset when
backtrack_insn() processed preceding BPF_EXIT in the loop deleted in
this patch.
Because of that, the second visit of the call to bpf_loop() injected
checkpoint with R1 not marked as precise. Which could trick the
verifier into accepting unsafe programs. See the next patch for an
example of such program.
Commit is structured in a way to minimize conflicts when
'bpf' would be eventually merged with 'bpf-next'. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: backtrack_insn(): Handle ld_{abs,ind} subprog exit edge
Nicholas Carlini reported a bug in precision backtracking mechanism
for BPF_LD | BPF_{IND,ABS} instructions. These instructions are
modelled as two branches:
- fallthrough;
- implicit exit from current subprogram.
The implicit exit case was not handled by the backtrack_insn()
function. When backtracking such a path backtrack_insn() did not
call bt_subprog_enter(), which meant that backtracking continued
manipulating precision marks in a caller frame, while looking at
instructions in a callee frame.
This lead to segmentation faults during verification (see the
selftest), or unsound state pruning. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/rt,dl: Skip migrate-disabled tasks when picking a push candidate
A migrate_disable()'d RT task cannot be moved to another CPU, but the
scheduler still keeps such a task on that CPU's pushable list
(rq->rt.pushable_tasks) and still marks the runqueue RT-overloaded
(rq->rt.overloaded = 1). So the RT balancer keeps treating this CPU as
having a task to move away, and keeps trying to move the task, but the
push can never succeed. When the head is pinned, push_rt_task() does not
give up either. It falls back to pushing rq->curr instead, using the
per-CPU stopper, as added by commit a7c81556ec4d ("sched: Fix
migrate_disable() vs rt/dl balancing").
The CPU spends tens of milliseconds in this retry loop. The core is
isolated for real-time work, but during the loop nearly half of its time
is consumed by pushes that cannot succeed.
An ftrace capture of the affected CPU, with sched_switch enabled and
commit 94894c9c477e ("sched/rt: Skip currently executing CPU in
rto_next_cpu()") applied, shows where the CPU time went. Two SCHED_FIFO
tasks at equal priority shared the CPU, taskA migrate_disable()'d and
queued, taskB as rq->curr. In one 89 ms window, taskB got only 52 ms of
CPU. The other 37 ms went to the stopper thread.
The scheduler kept trying to push taskA, the pinned head of the pushable
list, fell back to pushing taskB instead, and woke the stopper 5204
times. Every one of those pushes failed and no task was moved. taskA
stayed runnable and queued the whole time, and never ran.
Pushing taskB fails on a re-check. find_lock_lowest_rq() drops the rq
lock to take the target rq lock, then checks again with
"task != pick_next_pushable_task(rq)".
The task being pushed is taskB, but the pick returns taskA, the head of
the pushable list. taskB is rq->curr, and set_next_task_rt() removes the
running task from that list, so taskB can never be the head. The check
expects a candidate taken from the pushable list, but the fallback
pushes rq->curr, which is never on that list. So the check fails every
time.
.--> push-IPI arrives
| |
| v
| pushable head = taskA -> pinned, cannot be pushed
| |
| v
| so push taskB instead -> wake migration/N, a stop-class
| | thread, so it preempts taskB
| v
| re-check compares taskB against the pushable head,
| which is still taskA -> give up
| |
| v
| nothing moved, taskA still queued, rq still overloaded
| |
'----------'
repeats every ~17 us, 5204 times, for 89 ms
The loop cannot stop itself. Every round leaves the runqueue
exactly as it was, so the next push-IPI does the same thing. In
the capture it ended only when taskB went to sleep on its own.
taskA was then picked locally and left the pushable list.
CPU time per task in the window, from sched_switch:
taskB 51.95 ms real work
migration/N 37.18 ms nothing moved
taskA 0.00 ms queued the whole time, never picked
idle 0.01 ms
Counts over the same window:
7667 push-IPIs handled on this CPU
17481 pick_next_pushable_task() returned taskA, still pinned
5204 find_lock_lowest_rq() gave up on the re-check
1 push that actually completed
0 migrations of taskA
The CPU times and the window length come from the standard
sched_switch tracepoint. The counts needed tracepoints added inside
the RT balancer for this investigation.
The self-IPI path is closed by the rto_next_cpu() fix above, and that
part works. But the runqueue is still marked overloaded, because the
pinned task is still advertised as pushable. Other CPUs now send the
push-IPIs during their own RT balancing, and the same loop runs again.
Closing the self-IPI path did not stop a pinn
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Fix SPSR_EL2 restore in kvm_hyp_handle_mops()
kvm_hyp_handle_mops() resets the single-step state machine as part of
rewinding state for a MOPS exception by modifying vcpu_cpsr() and
writing the result directly into hardware.
In the case of nested virtualization, vcpu_cpsr() is a synthetic value
such that the rest of KVM can deal with vEL2 cleanly. That means the
value requires translation before being written into hardware, which is
unfortunately missing from the MOPS handler.
Fix it by directly modifying SPSR_EL2 and avoiding the synthetic state
altogether, which will be resynchronized on the next 'full' exit back
to KVM. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: wean fast IN from emulator_pio_in
Use __emulator_pio_in() directly for fast PIO instead of bouncing through
emulator_pio_in() now that __emulator_pio_in() fills "val" when handling
in-kernel PIO. vcpu->arch.pio.count is guaranteed to be '0', so this a
pure nop.
emulator_pio_in_emulated is now the last caller of emulator_pio_in.
No functional change intended. |
| Vulnerability in the Helidon product of Oracle Fusion Middleware (component: helidon-security-providers-http-auth). Supported versions that are affected are 3.0.0-3.2.21, 4.0.0-4.5.5 and 27.0.0. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Helidon. While the vulnerability is in Helidon, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Helidon accessible data. CVSS 3.1 Base Score 6.8 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:C/C:H/I:N/A:N). |
| Vulnerability in the Helidon product of Oracle Fusion Middleware (component: helidon-security-providers-google-login). Supported versions that are affected are 4.0.0-4.5.5. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Helidon. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Helidon accessible data. CVSS 3.1 Base Score 5.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N). |
| Vulnerability in the Helidon product of Oracle Fusion Middleware (component: helidon-security-providers-idcs-mapper). Supported versions that are affected are 3.0.0-3.2.21 and 4.0.0-4.5.5. Difficult to exploit vulnerability allows low privileged attacker with logon to the infrastructure where Helidon executes to compromise Helidon. While the vulnerability is in Helidon, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Helidon accessible data. CVSS 3.1 Base Score 5.6 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:N/A:N). |
| Vulnerability in the Helidon product of Oracle Fusion Middleware (component: OIDC). Supported versions that are affected are 4.0.0-4.5.5 and 27.0.0. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Helidon. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in Helidon, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Helidon accessible data as well as unauthorized update, insert or delete access to some of Helidon accessible data. CVSS 3.1 Base Score 6.9 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:C/C:H/I:L/A:N). |
| Vulnerability in the Helidon product of Oracle Fusion Middleware (component: LRA). Supported versions that are affected are 4.0.0-4.5.5. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Helidon. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Helidon accessible data. CVSS 3.1 Base Score 3.7 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:N/A:N). |
| Vulnerability in the Helidon product of Oracle Fusion Middleware (component: helidon-cors). Supported versions that are affected are 4.0.0-4.5.5. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Helidon. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Helidon accessible data. CVSS 3.1 Base Score 3.1 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:N/I:L/A:N). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: avoid kobject path lookup in DualSense match
The DualSense jack-detection input handler verifies that a matching input
device belongs to the same physical controller by building kobject path
strings for both the input device and the USB audio device, then comparing
the path prefix.
This was observed when a weak physical connection caused the controller
to rapidly disconnect and reconnect. During that repeated hotplug,
snd_dualsense_ih_match() can run while the controller's USB device is
being disconnected. kobject_get_path() walks ancestor kobjects and
dereferences their names; if the USB device kobject name is no longer
valid, this can fault in strlen():
RIP: 0010:strlen+0x10/0x30
Call Trace:
kobject_get_path+0x34/0x150
snd_dualsense_ih_match+0x49/0xd0 [snd_usb_audio]
input_register_device+0x566/0x6a0
ps_probe+0xb89/0x1590 [hid_playstation]
The same ownership check can be done without building kobject path
strings. The input device is parented below the HID device, USB interface
and USB device, so walking the input device parent chain and comparing
against the mixer USB device preserves the check without dereferencing
kobject names during disconnect. |
| A path handling issue was addressed with improved validation. This issue is fixed in iOS 18.7.5 and iPadOS 18.7.5, iOS 26.2 and iPadOS 26.2. Restoring a maliciously crafted backup file may lead to modification of protected system files. |
| In multiple locations, there is a possible side channel information leak due to improperly used crypto. This could lead to paired device information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| The `ClusterRenderingService.dump()` method, accessible to processes holding `android.permission.DUMP` and `android.permission.PACKAGE_USAGE_STATS`, acts as a confused deputy. It allows attackers to write arbitrary values to `Settings.Global.OVERLAY_DISPLAY_DEVICES`, an operation normally requiring `android.permission.WRITE_SECURE_SETTINGS`, enabling persistent creation of system overlay displays and injection of key events into the cluster UI. |
| The issue was addressed with improved checks. This issue is fixed in macOS Golden Gate 27.2, macOS Sequoia 15.8.2, macOS Tahoe 26.7.2. A maliciously crafted ZIP archive may bypass Gatekeeper checks. |
| In multiple locations, there is a possible denial of service due to improper input validation. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| A flaw was found in uv. This vulnerability allows an attacker to execute malicious code during package resolution or installation via specially crafted ZIP (Zipped Information Package) archives that exploit parsing differentials, requiring user interaction to install an attacker-controlled package. |