Search Results (1386 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-122096 1 Apache Software Foundation 1 Apache Datasketches Java 2026-11-17 7.5 High
Uncontrolled Resource Consumption vulnerability in the sketch deserialization of Apache DataSketches Java. Several deserializers trusted sizes and counts declared in the serialized input. A small crafted input could make an application allocate an excessive amount of memory, leading to an OutOfMemoryError. A crafted string passed to FrequentLongsSketch.getInstance(String) could also make deserialization, or a later update, loop indefinitely. Only applications that deserialize sketches from untrusted sources are affected. This issue affects Apache DataSketches Java: through 9.0.0. Users are recommended to upgrade to version 9.1.0, which fixes the issue.
CVE-2026-125275 1 Nerves-hub 1 Nerves Hub Web 2026-11-17 N/A
Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in device certificate verification in nerves-hub nerves_hub_web allows an unauthenticated remote attacker to cause a denial of service via a TLS client certificate whose CA is not registered. When a client certificate chains to a root in the device endpoint's trust store but no CA in the chain is registered in NervesHub, NervesHub.SSL.decide/2 refuses it with the reason :unknown_ca. Erlang/OTP ssl reads that reason as a missing trust anchor, looks for an alternative root, finds the same root and validates again without end. The handshake process queries the database on each pass and keeps running after the client disconnects, until the node restarts. The device endpoint trusts the public roots from CAStore unless DEVICE_SSL_CACERTFILE is set, so a client certificate from a public CA whose chain allows client authentication is sufficient. A chain that ends at a root outside the trust store is refused once. This issue affects nerves_hub: from 1.0.0 before 2.5.4.
CVE-2026-103645 1 Qt 4 Qt, Qt5compat, Qt Framework and 1 more 2026-11-17 N/A
An integer overflow vulnerability in the Qt QTextCodec fromUnicode() and toUnicode() functionality of the Qt 5 Core Compatibility APIs module (Qt 6) and the Qt Core module (Qt 5). Only builds where Qt is compiled with ICU support are affected.
CVE-2026-107496 1 Openssl 1 Openssl 2026-11-16 7.5 High
Issue summary: Encrypting a CMS message to an EC certificate whose group order is 1 may cause CMS_encrypt() or CMS_encrypt_ex() to loop indefinitely. Impact summary: An attacker able to supply the recipient certificate to an application performing CMS encryption can cause that application to loop indefinitely, consuming CPU and resulting in Denial of Service. CWE: CWE-835: Loop with Unreachable Exit Condition ('Infinite Loop') Description: CMS_encrypt() and CMS_encrypt_ex() encrypt a message to one or more recipient certificates and, for an EC recipient, generate an ephemeral key in the recipient's group. If the certificate declares a group order of 1, random scalar generation can only produce zero. The key generation routine then retries without limit while waiting for a nonzero private scalar, so the call never returns. The OpenSSL TLS and QUIC implementations do not use this path. An application is exposed only if it calls CMS_encrypt() or CMS_encrypt_ex() with a recipient certificate whose EC parameters are attacker-controlled. Certificates with normal EC group orders do not trigger the loop. OpenSSL 4.0 and later reject unknown explicit EC groups in default builds. These versions are affected only when configured with the enable-ec_explicit_curves option. The result is a hang that consumes a CPU core until the process is interrupted, a Denial of Service. The severity is Low because the attacker must supply the recipient certificate and the application must choose to encrypt to it; ordinary CMS encryption to trusted recipients is unaffected. The fix makes EC key generation fail when the group has no valid nonzero private scalar, instead of retrying indefinitely. FIPS impact: no The FIPS modules in 4.1, 4.0, 3.5 and 3.0 are not affected. The FIPS provider does not support arbitrary explicit EC domain parameters, so an order-1 group is rejected during key import before the vulnerable key generation path is reached.
CVE-2026-55709 2026-11-16 N/A
Loop with unreachable exit condition ('infinite loop') in the MigTD's GetQuote for the Intel(R) TDX Migration Trust Domain (MigTD) within Ring 0: Hypervisor may allow a denial of service. System software adversary with an unauthenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts.
CVE-2026-128987 2 Red Hat, Redhat 2 Enterprise Linux, Enterprise Linux 2026-11-16 6.2 Medium
A flaw was found in dbus. A local attacker can exploit this vulnerability by connecting to an affected service, requesting a response, and stopping socket reads while keeping the connection open. Because the socket transport handles broken pipe write errors as retryable, the application enters a continuous retry loop. This can lead to excessive CPU consumption, resulting in a denial of service (DoS) for the target process.
CVE-2026-97402 2026-11-16 N/A
In Eclipse Kura versions 3.1.0 to 5.6.2, the iBeacon and Eddystone advertisement decoders wrongly parse the AD-structure length field of an over-the-air BLE advertising payload. Any unauthenticated attacker within BLE radio range can broadcast a two-byte advertising payload that drives the Kura beacon-scanner thread into a tight infinite loop, pinning a CPU core and permanently halting beacon ingestion until the gateway is restarted. To trigger the attack, the iBeacon/Eddystone scanner component should be installed and active. By default the components are not installed or enabled.
CVE-2026-33969 1 Samsung Semiconductor 19 Exynos 1280, Exynos 1330, Exynos 1380 and 16 more 2026-11-15 7.5 High
In the NAS Authentication Request message decoding procedure, a missing lower bound check causes an infinite loop, leading to Denial of Service.
CVE-2026-121809 1 Elixir-grpc 2 Grpc, Grpc Server 2026-11-14 N/A
Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in elixir-grpc grpc_server and grpc allows unauthenticated attackers to occupy a BEAM scheduler indefinitely via a client-streaming or bidirectional-streaming request whose body ends inside a gRPC message. GRPC.Server.Adapters.Cowboy.read_stream/1 (grpc_server/lib/grpc/server/adapters/cowboy.ex, and the Cowboy adapter in grpc before the package split) asks for more data whenever the buffer does not hold a complete message. Once the request body has ended, every further read returns an empty chunk, so the buffer never changes and the function retries without end. A single 5-byte length prefix sent with END_STREAM keeps one scheduler busy for as long as the connection stays open, and repeated requests exhaust all schedulers. This issue affects grpc_server: from 1.0.0 before 1.1.0; grpc: from 0.3.1 before 1.0.0.
CVE-2026-52789 1 Bacnetstack 1 Bacnet Stack 2026-11-13 7.5 High
BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, a Denial of Service (DoS) vulnerability exists in the BACnet stack's ReadPropertyMultiple (RPM) handler. When processing a malformed RPM request packet that lacks the expected closing tags, the function handler_read_property_multiple enters an infinite loop. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0.
CVE-2026-62974 1 Bacnetstack 1 Bacnet Stack 2026-11-13 N/A
BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, a malformed but non-empty BACnet WriteProperty request can drive the official server demo into a non-terminating request-processing loop with repeated heap-backed side effects. This results in a remote unauthenticated denial of service via uncontrolled resource consumption and a non-terminating request path. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0.
CVE-2026-128130 1 Aio-libs 1 Aiohttp 2026-11-13 N/A
AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.4, when the pipelined request queue is full, the pure-Python parser stores the unparsed remainder internally and also returns the same data to its caller. After a handler declines an upgrade request, the caller feeds the remainder back to the parser, causing the buffer to grow with each handled request and dispatching already-handled requests to the application again. The issue affects deployments using AIOHTTP_NO_EXTENSIONS or otherwise running without the standard C-extension wheel, and can cause excessive memory use and repeated request processing. This issue is fixed in version 3.14.4.
CVE-2026-126237 1 Fortinet 1 Fortiauthenticator 2026-11-13 7.5 High
A loop with unreachable exit condition ('infinite loop') vulnerability in Fortinet FortiAuthenticator 8.0.0 through 8.0.3, FortiAuthenticator 6.6.0 through 6.6.10 may allow an attacker to cause a denial of service via crafted TCP requests.
CVE-2026-123607 1 Hickory-dns 1 Hickory-dns 2026-11-13 7.5 High
Hickory DNS hickory-proto 0.25.0-alpha.3 through 0.25.2 and hickory-net before 0.26.1 contain an unbounded loop vulnerability in DnssecDnsHandle NSEC3 closest-encloser proof validation when the SOA owner is not an ancestor of the QNAME. Upstream attackers can return NoData or NXDomain responses with a cross-zone SOA record to panic debug builds or exhaust memory in release builds.
CVE-2026-63890 1 Linux 1 Linux Kernel 2026-11-12 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: scsi: fcoe: Reject FIP descriptors with zero fip_dlen in CVL walker drivers/scsi/fcoe/fcoe_ctlr.c::fcoe_ctlr_recv_clr_vlink() advanced the descriptor cursor by an attacker-supplied fip_dlen without ever requiring dlen >= sizeof(struct fip_desc) in the default branch. The named descriptor cases (FIP_DT_MAC, FIP_DT_NAME, FIP_DT_VN_ID) checked their per-type minimum lengths, but a FIP_DT_NON_CRITICAL descriptor (fip_dtype >= 128, which the standard requires receivers to silently ignore) skipped that check entirely. An unauthenticated L2 peer on the FCoE control VLAN could hang fcoe_ctlr_recv_work on an fcoe, qedf, or bnx2fc initiator indefinitely by emitting one FIP CVL frame whose single descriptor had fip_dtype == FIP_DT_NON_CRITICAL and fip_dlen == 0: the cursor advanced zero bytes per iteration and the loop condition rlen >= sizeof(*desc) stayed true forever, blocking every subsequent FIP frame on that controller. Tighten the outer dlen guard to also reject dlen < sizeof(struct fip_desc), so a malformed descriptor whose length cannot even cover the descriptor header is rejected before the switch. This is the same lower-bound the named cases already apply and is the minimum scope that closes the loop.
CVE-2026-98106 1 Linux 1 Linux Kernel 2026-11-12 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: drm/pagemap: Prevent double migration of device pages A device-private folio migrated to system memory by a CPU fault can remain reachable through the raw-PFN eviction path until migration finalization drops the source reference. If eviction selects the same device-private folio during this window, it can attempt to migrate the folio again. The second migration can leave an uncharged folio on an LRU list, causing folio_lruvec_lock_irqsave() to retry indefinitely and resulting in a soft lockup and RCU stall. Mark successfully migrated device-private folios using a low bit of their zone_device_data before migration finalization. Make both CPU-fault and raw-PFN migration paths skip device-private folios carrying this flag. Mask the flag when retrieving the drm_pagemap_zdd pointer and preserve it when a device-private folio is split. Keeping the state on the physical folio also avoids depending on a virtual address that may change before a fault occurs. v2: - Replace the retired-PFN XArray with an embedded bitmap. (Matthew Brost) - Mark every base page covered by a migrated folio so retirement remains valid if the folio is later split. v3: - Store the migrated state in a low bit of zone_device_data instead of adding virtual-range and bitmap tracking to the ZDD. (Matthew Brost) - Mask the flag when retrieving the ZDD and preserve it when splitting a folio. - Drop the pre-existing fixes already covered by Matthew Brost's series: https://patchwork.freedesktop.org/series/171651/ v4: - Advance by the folio size only for migration entries marked with MIGRATE_PFN_COMPOUND. (Sashiko) v5: - Simplify ZDD flag updates and folio iteration. (Matthew Brost) - Skip retired device-private folios in the CPU-fault path. (Matthew Brost) - Preserve flag bits while taking a new ZDD reference for split folios. v6: - Restore MIGRATE_PFN_COMPOUND-aware stepping so non-compound migration entries are processed one at a time. (Sashiko) - Drop the pre-existing fixes already covered by Matthew Brost's series: https://patchwork.freedesktop.org/series/171651/ The lockup was observed as: [10109.860465] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [kworker/u65:5:6557] [10109.860524] Tainted: [S]=CPU_OUT_OF_SPEC, [O]=OOT_MODULE [10109.860524] Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 0812 02/24/2023 [10109.860525] Workqueue: xe_page_fault_work_queue xe_pagefault_queue_work [xe] [10109.860644] RIP: 0010:_raw_spin_unlock_irqrestore+0x57/0x80 [10109.860655] Call Trace: [10109.860655] <TASK> [10109.860657] folio_lruvec_lock_irqsave+0x216/0x220 [10109.860661] ? __pfx_lru_add+0x10/0x10 [10109.860665] folio_batch_move_lru+0xc8/0x450 [10109.860670] ? lock_acquire+0xc4/0x2d0 [10109.860674] ? __folio_batch_add_and_move+0x60/0x2e0 [10109.860677] ? folio_migrate_mapping+0xa6/0x110 [10109.860679] ? folio_migrate_flags+0x13b/0x1b0 [10109.860681] ? __pfx_lru_add+0x10/0x10 [10109.860683] __folio_batch_add_and_move+0xe7/0x2e0 [10109.860685] ? dma_iova_try_alloc+0xb0/0x140 [10109.860689] folio_add_lru+0x64/0x80 [10109.860691] __migrate_device_finalize+0x12c/0x270 [10109.860695] migrate_device_finalize+0x10/0x20 [10109.860698] drm_pagemap_evict_to_ram+0x185/0x370 [drm_gpusvm_helper] [10109.860704] ? drm_pagemap_evict_to_ram+0x96/0x370 [drm_gpusvm_helper] [10109.860709] xe_svm_bo_evict+0x15/0x20 [xe] [10109.860819] ? xe_svm_bo_evict+0x15/0x20 [xe] [10109.860921] xe_bo_move+0x107e/0x1570 [xe] [10109.860992] ? xe_ttm_tt_create+0x168/0x340 [xe] [10109.861059] ? __up_read+0x98/0x2b0 [10109.861061] ? lock_is_held_type+0xa3/0x130 [10109.861067] ttm_bo_handle_move_mem+0xe8/0x1e0 [ttm] [10109.861075] ttm_bo_evict+0x141/0x1c0 [ttm] [10109.861081] ttm_bo_evict_cb+0x9f/0x100 [ttm] [10109.861086] ttm_lru_walk_for_evict+0x84/0x190 [ttm] [10109.861091] ? xe_ttm_vram_mgr_new+0x258/0x3a0 [xe] [10109.861198] ttm_bo_alloc_resource+0x219/0 ---truncated---
CVE-2026-90585 1 Zephyrproject 1 Zephyr 2026-11-12 4.6 Medium
The Renesas RA SCI UART driver's receive-error ISR, uart_ra_sci_eri_isr() in drivers/serial/uart_renesas_ra_sci.c, acknowledged the error condition only when a Zephyr interrupt-driven callback had already been registered. With CONFIG_UART_INTERRUPT_DRIVEN=y and CONFIG_UART_ASYNC_API=n, if data->user_cb is NULL the ISR body is empty: the SCI error flags (SSR.ORER, SSR.FER, SSR.PER) are left set and the ICU event flag R_ICU->IELSR_b[eri_irq].IR is never cleared, so the interrupt re-pends immediately and the ISR is re-entered without end. The error interrupt is masked at boot by uart_ra_sci_init(), but FSP's R_SCI_UART_Open() unconditionally re-enables it, and uart_ra_sci_configure() - the back end of the public uart_configure() API, enabled by default via CONFIG_UART_USE_RUNTIME_CONFIGURE - performs a Close()/Open() pair without re-masking it. Any runtime uart_configure() therefore leaves the error interrupt live regardless of whether a callback has been set, as does calling uart_irq_err_enable() on its own. An instance used with the polling API, or the window between uart_configure() and uart_irq_callback_user_data_set(), thus runs with the error interrupt unmasked and no callback registered. The trigger is an ordinary receive line error - overrun, framing, parity, or a break condition - which is fully determined by the device attached to the serial link. A peer able to assert a break or transmit at a mismatched baud rate produces such an error at will, so a single frame is enough to enter the state. The impact is availability only: the CPU is captured in the re-entering ISR and never returns to thread context, hanging the entire system until an external reset or hardware watchdog fires. There is no memory corruption or information disclosure. Builds using the asynchronous UART API are unaffected, because the fall-through to FSP's sci_uart_eri_isr() clears both the error flags and the pending IRQ.
CVE-2026-63983 1 Linux 1 Linux Kernel 2026-11-12 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: net/sched: fix packet loop on netem when duplicate is on When netem duplicates a packet it re-enqueues the copy at the root qdisc. If another netem sits in the tree the copy can be duplicated again, recursing until the stack or memory is exhausted. The original duplication guard temporarily zeroed q->duplicate around the re-enqueue, but that does not cover all cases because it is per-qdisc state shared across all concurrent enqueue paths and is not safe without additional locking. Use the skb tc_depth field introduced in an earlier patch: - increment it on the duplicate before re-enqueue - skip duplication for any skb whose tc_depth is already non-zero. This marks the packet itself rather than mutating qdisc state, therefore it is safe regardless of tree topology or concurrency.
CVE-2026-63982 1 Linux 1 Linux Kernel 2026-11-12 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: net/sched: Fix ethx:ingress -> ethy:egress -> ethx:ingress mirred loop When mirred redirects to ingress (from either ingress or egress) the loop state from sched_mirred_dev array dev is lost because of 1) the packet deferral into the backlog and 2) the fact the sched_mirred_dev array is cleared. In such cases, if there was a loop we won't discover it. Here's a simple test to reproduce: ip a add dev port0 10.10.10.11/24 tc qdisc add dev port0 clsact tc filter add dev port0 egress protocol ip \ prio 10 matchall action mirred ingress redirect dev port1 tc qdisc add dev port1 clsact tc filter add dev port1 ingress protocol ip \ prio 10 matchall action mirred egress redirect dev port0 ping -c 1 -W0.01 10.10.10.10
CVE-2026-63969 1 Linux 1 Linux Kernel 2026-11-12 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible infinite loop in rt6_fill_node() Sashiko reported this issue [1]. Apply the same fix as commit f8d8ce1b515a ("ipv6: fix possible infinite loop in fib6_info_uses_dev()"). Writers holding tb6_lock can list_del_rcu(&rt->fib6_siblings) without waiting for RCU readers; rt->fib6_siblings.next then still points into the old ring and this softirq-side walker never reaches &rt->fib6_siblings, causing a CPU stall. fib6_del_route() always WRITE_ONCE()s rt->fib6_nsiblings to 0 before list_del_rcu(), so an inside-loop check is a reliable detach signal. [1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev