| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Uninitialized memory in the Graphics: WebGPU component. This vulnerability was fixed in Firefox 160 and Thunderbird 160. |
| Issue summary: QUIC, when performing automated peer detection, may allow
uninitialized stack data to leak into the received address which is then used
as the destination for outgoing packets.
Impact summary: Applications using QUIC's automated peer detection mechanism
may receive an invalid address, leading to connection loss and disclosure of
uninitialized stack data to an attacker observing the outgoing network traffic.
CWE: CWE-457 (Use of Uninitialized Variable)
Description: The OpenSSL QUIC stack contains a feature in which, when using an
already connected socket, it will auto-detect the peer address during the SSL
handshake. This feature uses the getpeername() function, passing a buffer of
sufficient length to hold any supported address family, but passes a buffer
length that is only sized such that larger addresses, such as IPv6, cannot be
retrieved. The getpeername() function however, still returns the full address
length, which is accepted as the valid input buffer length, leading to the
address buffer containing uninitialized stack data instead of the actual peer
address. The invalid peer address is then used as destination for the outgoing
packets which leads to a connectivity breakage and a leakage of the
uninitialized stack data to passive network observers.
FIPS impact: no
The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by this CVE as
the affected protocol is not implemented in the FIPS module. |
| BACnet Stack is a BACnet open source protocol stack C library for embedded systems. From versions 1.4.0 to before 1.4.4, and 1.5.0 to before 1.5.1, an uninitialized value use vulnerability in bacnet-stack's AtomicReadFile record-access ACK encoder allows unauthenticated remote attackers to corrupt the encoded OCTET STRING length and payload boundary in network responses by sending a crafted AtomicReadFile request that reaches a successful record-access path. This issue has been patched in versions 1.4.4 and 1.5.1. |
| A memory corruption vulnerability exists in VideoLAN VLC 3.0.23. A specially crafted Interplay MVE file can trigger a condition that allows access to a variable that is not explicitly initialized, which under certain conditions can lead to code execution in the context of the current process. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: bound mon_command ack decode to front len
handle_command_ack() bounds the decode with msg->front_alloc_len, the size
of the reply buffer, instead of msg->front.iov_len, the number of bytes the
monitor sent. mon_alloc_msg() routes every CEPH_MSG_MON_COMMAND_ACK to
get_generic_reply(), which returns the preallocated ->reply of whichever
generic request carries the same tid, so the buffer keeps its fixed size
however short the reply is. An ack with hdr.front_len below sizeof(struct
ceph_mon_request_header) + sizeof(u32), including 0, still passes
ceph_decode_need(), and ceph_decode_32() returns four bytes that were never
received: uninitialized slab memory, stale bytes of an earlier message, or
bytes the peer planted by sending a reply that lands in the same buffer and
is then rejected. The read stays within the allocation, so KASAN does not
flag it.
req->result reaches userspace through ceph_monc_do_statfs(),
ceph_monc_get_version() and ceph_monc_blocklist_add(); rbd hands it back
from write() on /sys/bus/rbd/add_single_major, and rbd_get_client() passes
it to ERR_PTR() unchecked, which faults:
rbd: failed to get latest osdmap: -186318427
BUG: unable to handle page fault for address: fffffbfffe9ca034
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:do_rbd_add (drivers/block/rbd.c:7105)
Call Trace:
...
kernfs_fop_write_iter (fs/kernfs/file.c:345)
vfs_write (fs/read_write.c:595 fs/read_write.c:687)
ksys_write (fs/read_write.c:739)
do_syscall_64 (arch/x86/entry/syscall_64.c:61 arch/x86/entry/syscall_64.c:84)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Kernel panic - not syncing: Fatal exception
Use msg->front.iov_len, matching handle_subscribe_ack(),
handle_statfs_reply(), handle_get_version_reply() and handle_auth_reply().
A well-formed ack has front.iov_len >= 22 and is unaffected; a short one
takes the existing bad: path. This applies commit d3c32939fa0e ("libceph:
bound get_version reply decode to front len") to the last decode-side
use of front_alloc_len in this file. |
| boot_save_boot_status() in boot/bootutil/src/boot_record.c reads the image's EXPECTED_HASH_TLV into a stack buffer image_hash[IMAGE_HASH_SIZE] that is never zero-initialised. The TLV handler validates only the upper bound (len > sizeof(image_hash)) and then reads exactly len bytes, so a TLV shorter than IMAGE_HASH_SIZE leaves the tail of image_hash holding stale stack content. The subsequent copy into the boot record, memcpy(buf + offset, image_hash, sizeof(image_hash)), uses the fixed buffer size rather than len, so up to IMAGE_HASH_SIZE - 1 bytes of uninitialised bootloader stack are written into the measured-boot record.
The defect is reachable only under MCUBOOT_MEASURED_BOOT, and only when nothing has checked the length of the hash TLV before boot_save_boot_status() reads it. bootutil_img_validate() rejects a hash TLV whose length is not exactly sizeof(hash) (boot/bootutil/src/image_validate.c:345), and primary-slot validation is on by default (Zephyr's CONFIG_BOOT_VALIDATE_SLOT0 defaults to y), so in a default build the malformed image never reaches this code. Two kinds of build let a short TLV through:
Builds that use pure signatures (MCUBOOT_SIGN_PURE, Zephyr CONFIG_BOOT_SIGNATURE_TYPE_PURE). The signature covers the image itself, so the hash-TLV check in bootutil_img_validate() is compiled out, and a pure-signed image normally carries no hash TLV. A hash TLV is still allowed in the unprotected TLV area, which the signature does not cover, so a short one can be added to a correctly signed image without invalidating it. This applies with every upgrade strategy, including direct-XIP and RAM-load, and the modified image can be delivered through any path that accepts a signed image.
Builds with primary-slot validation turned off: the swap and overwrite loader built without MCUBOOT_VALIDATE_PRIMARY_SLOT, which checks only the image magic before calling boot_add_shared_data(), and the Zephyr single-slot loader (boot/zephyr/single_loader.c) built without it, including the MCUBOOT_VALIDATE_PRIMARY_SLOT_ONCE variant, which skips validation once the trailer records an earlier successful one. Placing the crafted image requires physical or flash-write access to the device; in a single-slot build with serial recovery enabled, the serial-recovery upload writes the primary slot directly and can place it as well. Outside pure-signature builds, the direct-XIP and RAM-load strategies in boot/bootutil/src/loader.c validate the selected slot unconditionally and are not affected.
It is also reachable through a time-of-check/time-of-use change to tamperable external flash between validation and the boot-record read.
In these configurations the boot record's measurement is already not trustworthy: the hash copied into the record is the image's own EXPECTED_HASH_TLV, which nothing has verified and which the attacker chooses. The defect therefore does not weaken attestation integrity any further. What it adds is a path for bootloader memory to leave the device: up to 63 bytes (IMAGE_HASH_SIZE - 1) of uninitialised bootloader stack are embedded in the measurement field that a downstream attestation service sends to a remote verifier. In the configurations analysed the residue is bootloader internal state (TLV offsets and lengths, flash addresses, loop state), not key material, but what occupies that stack region depends on configuration and on which code ran before boot_save_boot_status(). It is reported as a low-severity, defense-in-depth disclosure with no integrity or availability impact.
This is distinct from the already-fixed record_len integer underflow in the same routine (GHSA-8hrv-4cp5-4rg3). The fix rejects any EXPECTED_HASH_TLV whose length is not exactly IMAGE_HASH_SIZE. |
| In multiple functions of simd_ctx.c, there is a possible way to disclose secure vector predicate and fault registers to non-secure callers due to uninitialized data. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation. |
| Use of uninitialized variable in Skia in Google Chrome on on Android prior to 157.0.8103.78 allowed a remote attacker who had compromised the renderer process to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Network UPS Tools is a collection of programs which provide a common interface for monitoring and administering UPS, PDU and SCD hardware. From 2.4.2 through 2.8.5, ippon_command in drivers/blazer_usb.c partially initializes char tmp[64] with a short Megatec status query and then passes a fixed eight-byte chunk to usb_control_msg. A malicious firmware-controlled USB device presenting the Mustek Powermust VID 0x06da and Mustek Powermust PID 0x0003 matches blazer_usb_id, selects ippon_subdriver, and can receive the uninitialized trailing stack bytes during normal polling. The disclosure is bounded and read-only, requires physical or supply-chain access to the USB bus, and has no established integrity or availability impact. This issue is scheduled to be fixed in version 2.8.6. |
| A flaw was found in GStreamer's gst-plugins-bad package. A use of uninitialized memory vulnerability exists in the H.265 (HEVC) bitstream parser when processing Video Parameter Sets that declare more than one HRD (Hypothetical Reference Decoder) parameter set. A remote attacker could exploit this by providing a crafted H.265 media file or stream that, when processed by an application using GStreamer, causes unpredictable parser behavior and may crash the application. This can lead to a denial of service for any application using GStreamer to play back H.265 content. |
| WebAssembly Micro Runtime (WAMR) is a lightweight standalone WebAssembly (Wasm) runtime. Prior to 2.4.5, load_init_expr in core/iwasm/interpreter/wasm_loader.c accepts a non-reference heap-type byte for ref.null when WASM_ENABLE_GC=0, while the local WASMValue cur_value union is not zero-initialized and setting ref_index writes only part of it. A crafted module can declare an i64, f64, or v128 global initialized through the invalid ref.null form, causing push_const_expr_stack and the later global initialization path to copy uninitialized host-stack bytes into a value readable by the guest. The classic and fast interpreters are affected in the default no-GC configuration; the GC-enabled path validates heap types. The disclosure is four bytes for i64 or f64 globals and up to twelve bytes for each v128 global. This issue is fixed in version 2.4.5. |
| FFmpeg 2.0 through 9.0.2 contains a use of uninitialized variable vulnerability in the Go2Meeting decoder that allows attackers to leak stack memory through out-of-range palette indices. Attackers can craft a G2M3/G2M4 stream with a short Kempf palette so kempf_restore_buf() copies uninitialized stack bytes, including pointers or stack guards, into decoded output. |
| A use of uninitialized variable vulnerability in Fortinet FortiAnalyzer 7.6.3 through 7.6.6 may allow attacker to denial of service via SNMP GETBULK requests. |
| A flaw was found in m17n-lib. An attacker who supplies crafted input to an application processing ISO-2022 encoded text can cause the library to read uninitialized memory from the stack. If the application exposes or returns the decoded output, this flaw can result in unexpected behavior and limited information disclosure. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: adm1275: Prevent reading uninitialized stack
While adding support for the ROHM BD127X0 hot-swap controllers, sashiko
reported an error in device-name comparison, which can lead to reading
uninitialized stack memory.
Quoting Sashiko:
This is a pre-existing issue, but I noticed that just before this block in
adm1275_probe(), there might be an out-of-bounds stack read:
ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, block_buffer);
if (ret < 0) { ... }
for (mid = adm1275_id; mid->name[0]; mid++) {
if (!strncasecmp(mid->name, block_buffer, strlen(mid->name)))
break;
}
Since i2c_smbus_read_block_data() reads up to 32 bytes into the
uninitialized stack array block_buffer without appending a null
terminator, strncasecmp() could read past the valid bytes returned in ret.
For example, if the device returns a shorter string like "adm12", checking
it against "adm1275" up to the length of "adm1275" will continue reading
into uninitialized stack bounds.
Prevent reading uninitialized memory by zeroing the stack array. |
| Multiple uses of uninitialized variables were found in libopensc that may lead to information disclosure or application crash. An attack requires a crafted USB device or smart card that would present the system with specially crafted responses to the APDUs |
| A vulnerability was found in pkcs15-init in OpenSC. An attacker could use a crafted USB Device or Smart Card, which would present the system with a specially crafted response to APDUs.
Insufficient or missing checking of return values of functions leads to unexpected work with variables that have not been initialized. |
| A vulnerability was found in OpenSC, OpenSC tools, PKCS#11 module, minidriver, and CTK. An attacker could use a crafted USB Device or Smart Card, which would present the system with a specially crafted response to APDUs.
Insufficient or missing checking of return values of functions leads to unexpected work with variables that have not been initialized. |
| A vulnerability was found in OpenSC, OpenSC tools, PKCS#11 module, minidriver, and CTK. An attacker could use a crafted USB Device or Smart Card, which would present the system with a specially crafted response to APDUs.
The following problems were caused by insufficient control of the response APDU buffer and its length when communicating with the card. |
| A vulnerability was found in OpenSC, OpenSC tools, PKCS#11 module, minidriver, and CTK.
The problem is missing initialization of variables expected to be initialized (as arguments to other functions, etc.). |